BOOMPODS 2A36Q-ECHOBUDS Sound Waves Wireless Earbuds User Manual
- June 1, 2024
- Boompods
Table of Contents
BOOMPODS 2A36Q-ECHOBUDS Sound Waves Wireless Earbuds
In the Box
The recycled material used to make this product may have traces of the wide mix of types of plastics collected, this can allow some minor black spots and imperfections to appear on the surface. These are normal and do not affect the performance of the product.
How to Connect
For First-Time Use
- Open the charging case.
- Remove the earbuds.
- The buds will automatically pair together and enter the pairing stage.
- Turn on Bluetooth on your pairing device (phone).
- Select “ECHOBUDS” from the list of available devices.
- Wait for the connected confirmation.
Note
After you have completed these steps, the earbuds will automatically connect
to your device the next time. In pairing mode, If not connected after 10 mins
earbuds will power down.
Charging
The blinking green LED case needs charging use the provided USB charging
cable.
Touch Controls
Reset
In the unlikely case of any pairing problem
- Remove from the phone bluetooth menu.
- Press 6 times both earbuds at the same time.
- now re-pair to your phone for the first time.
Specification
- Product Name: ECHOBUDS
- Input: DC 5V = 70mA fast charge
- Material: R-ABS
- Charging case input: DCSV = 1A
- Bluetooth version: V5.3
- Charging time: 1.5h
- Noise reduction: ENC
- Frequency response range: 20Hz– 20KHz
- Communication distance: 10m
- Charging interface: Type-C
- Standby time: about 350h
- Product weight: 28.28
- Playing time: about 6 h volume (60%)
- Earbud battery: 30mAh/ 3.7V
- Total playback time: 19 ~ 22h
- Charging case battery: 230 mAh / 3.7V
- Product size: 5.94.372.38 (cm)
The Declaration of Conformity can be found at:
https://www.boompods.com/product/echobuds
Hereby, Boompods declares that the radio equipment type [Earphone with
Bluetooth] complies with Directive 2014/53/EU. FCC ID: 2A36Q-Echobuds
FCC statement
FCC ID: 2A36Q-ECHOBUDS
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference. and 2) this device must accept any interference received,
including interference
that may cause undesired operation. Changes or modifications not expressly
approved by the party responsible for compliance could void your authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for Class B digital devices, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements, the device can be used in portable exposure conditions without restriction.
RF warning statement
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
The Declaration of Conformity can be found at
https://www.boompods.com/product/Echobuds
Hereby. Boompods declares that the radio equipment type [Speaker with Bluetooth] complies with Directive 2014/53/EU. FCC ID : 2A36Q-ECHOBUDS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>