Boompods SoundRoll Wireless Speaker User Manual

BRAND

USER MANUAL

BLUETOOTH SPEAKER AND ACCESSORIES

A. Speaker
B. Type-C charging cable
C. AUX audio cable
D. User manual

FUNCTIONS

**1**

| | Long press 2S: Power on/off,
Short press 2 times: Bluetooth disconnected,
Short press 3 times: Reset factory data,
Long press 25S: Reset Bluetooth speaker,
---|---|---

2

|

M

| hours press: Switch LED mode,
Long press 2S: Turn off LED light,
Short press 2 times: TWS connection; TWS disconnection,

3

| | Rotating to left: Volume -,
Rotating to right: Volume +,

**4**

| | Short tap 1 time: Pause/play music; Pick up/hang-up calls,
Short tap 3 times: Previous song,
Short tap 2 times: Next song/phone call private protection,
Long tap 2S: Reject call,
Long tap 4S: Switch EQ mode,

5

| | 3.5mm AUX-IN

6

| | Microphone

OPERATIONS

Power on/off

Long press the” “button for 2S to power on, long press it for 2S again to power off.

Bluetooth mode

It will enter Bluetooth mode after the power is on, and the blue indicator will flash. Then choose “SoundRoll” from your devices list. You will hear a voice prompt once it is connected, and the blue indicator will stay on. Then you can start to play your music. Short press the” ” button two times to disconnect the Bluetooth connection. Short press three times to delete the speaker’s Bluetooth connection history information. When the speaker shuts down, long press ” ” for 25S to reset it, then long press” ” for 2S can power on the speaker.

TWS Connection

1. Power on two “SoundRoll” speakers, they will enter Bluetooth mode.
2. Short press each of their” M “button twice, two speakers will enter toTWS pairing mode and you will hear a voice prompt once they connected successfully. The master speaker’s blue indicator will keep flashing, the sub-master speaker’s blue indicator will stay on.
3. Choose”SoundRoll” from your device list to connect the master speaker. You will hear a voice prompt once it is connected, and the blue indicator will stay on.

After the two models are successfully connected to your phone, you can play music on both of them at the same time.

Volume control

Rotating the volume control knob to the right to increase volume, and left to decrease volume. There will be a “di—di” sound when the volume is adjusted to the maximum.

• Previous/next track control
  Tapping status indicator area 2 times for next track and 3 times for previous track under Bluetooth mode

• Control underplaying status
  Tapping 1 time to play/pause music under Bluetooth mode; Tapping 1 time to mute/unmute under AUX mode.

Handsfree call

When you have an incoming call, the speaker will enter into hands-free mode automatically under Bluetooth connection status. Short tap status indicator area once to answer the call and short tap it again to hang up. Short tap the area twice to transfer the call from speaker to phone which can protect your privacy.

AUX mode

This speaker supports AUX music playing. It will turn into AUX playing mode automatically once you insert the AUX cable.

LED lighting mode

This speaker supports 10 different LED lights. Short press ” M ” once to switch to another light. (mode 1, mode 2, mode 3, mode 4, mode 5, mode 6, mode 7, mode 8, mode 10-off these 10 modes will loop) Mode 1 defaults mode when you power it on.

EQ mode

This speaker supports balance sound, pure sound, and bass sound three different EQ modes. Long tap status indicator area 3 seconds to switch to another EQ. Balance sound defaults when you power it on.

Battery saving

Speaker will power off automatically to save the battery when there is no device connected in 10 minutes. Long press” 0 “2S to power on again.

Charging/power supply

Important note:

• Do not use the adapter which has no safety certificate
• Suggest to use output SV/2A(or above) adapter to charge
  1. Please charge it as soon as possible when you heard a low battery voice prompt
  2. red indicator will be on while charging and it will be off when charging done

FUNCTION INSTRUCTIONS

Power on| The blue indicator will be on when power on and enter to Bluetooth mode automatically, then the blue indicator will flash quickly (in Bluetooth searching status)
---|---
AUX| The green indicator will on when you insert the AUX cable
Bluetooth status| The Blue indicator stays on when Bluetooth is connected
Bluetooth indicator keeps flashing when your Bluetooth device is out of range or disconnected, then the speaker will be in searching status.
Maximum volume| There will be a voice prompt when you rotate the speaker’s volume to the maximum.
Charging status| A red indicator will be on while charging and be off when charging is done.
Low battery| The red indicator flashes when the battery is low.
LED lighting| Mode 1 defaults when power is on. There are 10 different

SPECIFICATIONS

FREQUENTLY ASKED QUESTIONS

Ql: What kind of charger should we use for the speaker?
A: All common USB chargers can be used, while we suggest the ones 5V/2A or above 2A.

Q2: What if there is noise or discontinuous sound during playing?
A: The speaker can be normally used within 10m under a no obstruction environment. If it is beyond 10m or with obstruction, there might be noise or discontinuous sound.

Q3: Why does the speaker power off automatically after power on but no Bluetooth disconnection?
A: When there is no Bluetooth pairing in 10 minutes, the speaker will shut down automatically to reduce power consumption.

Q4: Why does the speaker cannot connect to the once-paired cellphone?
A: First, remove the speaker’s paired name from the cellphone’s Bluetooth List and then restart pairing.

Q5: The speaker cannot be started up in a normal situation.
A: Please plug in the charger and try in a few minutes or try to long-press the power button 10-the the 30s to reset.

Notes:

1. Please read this manual carefully before use and keep it properly.
2. For the first use, please fully charge the product.
3. Pls, use a certified adapter that has passed national safety certification.
4. 11you do not use the product for a long time, be sure to charge it once within a month at least to maintain its performance.
5. Do not use this product in an extremely cold or hot environment, such as temperature beyond the range of 5 C -35 C If using it beyond the above range, the product may stop automatically to protect the internal circuit.
6. When charging it in a high-temperature environment, the product may automatically stop charging to protect the battery. At this time, the charging indicator usually flashes quickly to indicate that the charging environmental temperature or the product internal temperature is too high.
7. Storage environment temperature: -5∼35C RH< 70% (recommended 25 C ±5).

Important safety instructions:

1. Do not disassemble or repair this speaker personally, otherwise, it may cause product damage or personal injury.
2. Do not use it in dusty, humid, dry, and high-temperature environments.
3. Do not place this product near a heat source, or a place with direct sunlight, a lot of dust, or mechanical vibration.
4. In order to reduce the risk of fire, please do not cover this product with newspapers, tablecloths, curtains, etc., during use.
5. If the product has a waterproof feature, please do not exceed the nominal parameter range when using it.
6. When the product is damaged such as the power cord or plug is damaged, liquid enters or objects fall into the device, are unable to operate normally, or fall, it must be repaired.
7. When the product is fully charged, do not connect it to the charger for further long time charging.
8. The maximum ambient temperature should not exceed 40°C.

*This speaker supports mobile phones/tablets/PCs etc. Here this User Manual is illustrated based on mobile phones.

BRAND

MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>