Langchen HB13MINI Smart Watch User Guide
- June 16, 2024
- Langchen
Table of Contents
Langchen HB13MINI Smart Watch
Product Information
The Smart Wristband is a wearable device that tracks your daily movement, heart rate, blood pressure, and more. It connects to your smartphone via Bluetooth and has various features such as step counting, distance tracking, calorie estimation, music control, and call management. The wristband also has a sleep mode and stopwatch function. It requires the installation of a companion app on your smartphone to access all its features.
Specifications:
- Compatibility: Android 5.0 and above; iOS 9.0 and above
- Bluetooth Version: 4.0
Product Usage Instructions
Wear it properly:
Adjust the size of the wristband according to the adjustment hole and buckle
the wrist strap buckle. The bracelet should be worn after the ulnar styloid
and the sensor should be close to the skin to avoid movement.
Charge the bracelet:
Before using the wristband for the first time, ensure that the battery is in a
normal condition. If the device doesn’t turn on properly, connect the charger
to charge the device.
Install the bracelet app on your phone:
Scan the QR code or visit the App Store to download and install the app. The
app is available for both Android and iOS devices.
Device connection:
For the first use, you need to connect the app for calibration. Follow these
steps:
- Turn on the Bluetooth switch of your mobile phone system.
- Enter the app device module settings.
- Click on “Bind device” to enter and experience more features.
- The app will automatically search for nearby Bluetooth devices on the bracelet.
- Find and connect the bracelet device.
- Once the pairing is successful, the app will prompt you with a guide page. Follow the instructions to complete the connection.
Step Counting:
Wear the bracelet and it will record the number of steps you take each day.
You can view the current real-time steps on the app.
Distance Tracking:
The distance of your movement is estimated based on the number of walking
steps recorded by the bracelet.
Calorie Estimation:
The bracelet estimates the calories burned based on the number of walking
steps recorded.
Heart Rate, Blood Pressure, and Blood Oxygen Monitoring:
The wristband supports heart rate and blood pressure sensors.
Enter the heart rate three-in-one test interface on the app to view your
current heart rate, blood pressure, and blood oxygen levels.
Call Management:
The bracelet has a dial pad for making calls. You can add up to 8 commonly
used contacts in the app, and they will be displayed in the bracelet’s phone
book. Click on a contact to make a call.
Please note that your phone needs to be connected to the device for this
feature to work.
Music Control:
The bracelet can control music playback on your phone. You can skip to the
previous or next song and pause/start playback. Please ensure that your
devices are connected for this feature to work.
Dual Mode Switch:
This switch needs to be turned on for the phone to search for the device. If
the phone doesn’t connect to the device within 5 minutes after the bracelet is
turned on, the switch will automatically turn off. You need to manually turn
it on again when you want to use it.
Exercise Modes:
The wristband has various sports modes, including skipping rope.
All sports modes can record the calories burned and duration of skipping rope
exercise.
Sleep Mode:
The bracelet has a sleep mode that tracks your sleep patterns and quality.
This feature can be accessed through the app.
Stopwatch Function:
Enter the stopwatch mode on the bracelet and click the start button to start
timing. Click the pause button to stop timing and click the reset button to
clear the timing.
Custom Dial:
You can customize the dial of the bracelet by connecting it to the app. Choose
from recommended dials, default dials, or use your own custom dial from your
album. The dial settings will synchronize to the bracelet.
App Function and Settings:
Within the app, you can set your personal information, such as gender, age,
height, weight, and daily goal steps. This allows you to monitor your daily
completions. The app also provides SMS notification push, which will make the
bracelet vibrate when you receive a text message while connected.
FAQ (Frequently Asked Questions)
Q: What are the system requirements for using the wristband?
A: The wristband is compatible with Android 5.0 and above, and iOS 9.0
and above. It requires Bluetooth 4.0 support.
Q: How do I charge the wristband?
A: Connect the charger to the wristband to charge it. Ensure that the
battery is in a normal condition before using it for the first time.
Q: How do I connect the wristband to my phone?
A: Follow the device connection steps mentioned earlier in the user
manual. Make sure to turn on the Bluetooth switch of your phone and enter the
app device module settings to bind and connect the bracelet device.
Q: Can I control music playback with the wristband?
A: Yes, the wristband can control music playback on your phone. You can
skip to the previous or next song and pause/start playback.
Please ensure that your devices are connected for this feature to work.
Device connection
-
For the first use, you need to connect the APP for calibration. After the connection is successful, the bracelet will automatically synchronize the time.
-
Turn on the Bluetooth switch of the mobile phone system → enter the app device module settings → click “Bind device, experience more features” to enter, it will automatically search for nearby Bluetooth devices on the bracelet, find and connect the bracelet device.
-
After the pairing is successful, the APP will pop up a guide page.
According to the instructions, jump to the mobile phone system Bluetooth search t the connection is successful, you can make/receive calls and listen to music (Note: If the mobile phone system Bluetooth has not been searched equipment, please enter the Dual mode menu and set it to On, you cannot make calls without connecting the equipment.) -
APP will automatically save the Bluetooth address of the bracelet, and the APP will open and run in the background, and will automatically search and connect the bracelet;
-
Android phones use all notification permissions to read contact information and give the app background running in the phone settings.
Bracelet function description
- Slide down the standby page to enter the notification reminder, and slide up to enter the control center
- Swipe left or right on the standby page to cycle through the dials
- Long press 2 seconds on any dial page to start the language assistant. (Remarks: The mobile phone also needs to be connected to the device, and the smart phone needs to set the us er’s voice in advance in the voice menu)
- Click the screen on the standby page to enter the main menu, the style of the main menu can be switched
- Bracelet reset device This function will clear all data of the bracelet (such as step counting)
- Switch to the heart rate three-in-one interface to start the test, heart rate three-in-one interface 60s timeout automatically off screen (heart rate and blood pressure need bracelet hardware support).
Clock interface
After synchronizing with the phone, the bracelet will automatically calibrate
the time;
Swipe left or right on the standby page to cycle through the dials Step
Number of steps
Wear the bracelet and record the number of daily movement steps to view the
current real-time steps.
distance
The distance of motion is estimated based on the number of walking steps.
Calories
Estimate the calories burned based on the number of walking steps
Heart rate, blood pressure, blood oxygen three-in-one
After entering the heart rate three-in-one test interface for a few seconds,
the current heart rate, blood pressure, and blood oxygen test results are
displayed. This feature requires a wristband to support heart rate and blood
pressure sensors.
dial Dial pad for making calls (note: the phone also needs to be connected to
a device)
phone book
Add 8 commonly used contacts in the APP. After the bracelet is successfully
connected with the APP Bluetooth, the contacts can be displayed in the
bracelet phone book. Click the contact to make a call (Note: The phone
needs to be connected to a device)
Music control
The bracelet can control the previous song and the next song, and pause/ start
playback. (Note: devices need to be connected to use this feature phone)
Dual mode switch
This switch needs to be turned on for the phone to search for the device. If
the phone is not connected to the device within 5 minutes after the bracelet
is turned on, the switch will be turned off automatically, and it needs to be
turned on manually when it is used again.
exercise more
All sports modes can record the calories and duration of skipping rope.
Sleep mode
When you fall asleep, the bracelet will automatically enter the sleep
monitoring mode; automatically detect your deep sleep / light sleep / wake up
all night, calculate your sleep quality; the wristband only shows the total
length of deep sleep / light sleep / sleep, APP end can View sleep data
details.
Note: Sleep data will be available when you wear your wristband and sleep will
be detected from 10:00 pm. Sleeping data for 3/4 hours can be synchronized to
the app while sleeping.
Information mode
Information menu can view the latest news content
Stopwatch function
Enter the stopwatch and click the start button to start timing, click the
pause button to stop, and click the reset button to clear the timing.
Custom dial
You need to connect to the APP to get the dial settings, you can choose the
recommended dial / default dial / album custom dial to synchronize to the
bracelet.
APP function and settings
Personal information
Please set your personal information after entering the app.
Settings → Personal Information, you can set gender – age – height – weight –
distance You can also set your daily goal steps to monitor daily completions.
Application push
SMS notification:
In the connected state, if the SMS reminder function is enabled, the bracelet
will vibrate when there is a text message.
Other reminders:
In the connected state, if this function is enabled, when there are messages
such as WeChat, QQ, Facebook, etc., the bracelet will vibrate to remind and
display the content received by the app (You need to give the APP permission
to get system notifications, and the wristband can display 20-40 words).
Note: Incoming call reminder system is enabled by default, no switch option (calls for incoming calls need to be connected to device)
Other functions:
Turn on the vibration setting function, when there are calls, messages or
other reminders, the bracelet will vibrate. If it is off, the bracelet will
only have a screen reminder without shaking to avoid interruption.
Tips for Android users:
When using the reminder function, you need to set it to allow “FitPro” to run
in the background; it is recommended to add “FitPro” to the rights management
and open all permissions.
Alarm setting
In the connected state, 8 alarms can be set. After setting, it will be
synchronized to the bracelet; offline alarm is supported. After the
synchronization is successful, even if the APP is not connected, the bracelet
will be reminded according to the set time.
Looking for a bracelet
In the connected state, click the “Look for the bracelet” option and the
bracelet will vibrate.
Remote photography
In the connected state, start the photo from the wristband or the APP to enter
the remote camera interface, shake/turn the wrist/touch the bracelet, and
automatically take a photo after 3 seconds of counting down. Please allow the
APP to access the photo album to save the self-portrait photo.
Sedentary reminder
Set whether to enable the sedentary reminder function, you can set the
reminder interval, if you sit for a long time in the set time, the bracelet
will remind you.
Raise your hand to brighten
Turn this function on. When the wristband is in the state of the screen,lift
your wrist and turn the screen to yourself to light up the screen.
Do not disturb mode
Turn on the Do Not Disturb mode. You can set the Do not disturb time period.
During the set time period, the bracelet stops receiving notification messages
to avoid reminding messages.
Device reset
Setting this feature reset will erase all data in the bracelet (such as
step counting)
Remove device
Remove device This feature will erase data and remove device
Basic parameters
Precautions
- Bathing and swimming should not be worn.
- Please connect the bracelet when synchronizing data.
- Use the included charging cable to charge.
- Do not expose the handle ring to moisture for a long time,where the temperature is extremely high or extremely low.
- The flashover of the wristband restarts. Please check the memory information of the mobile phone to clear it and try again, or exit the APP and reopen it.
FCC Warnning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>