TROX GmbH TNC-70113 Heat Shrink Cap Installation Guide
- June 16, 2024
- TROX GmbH
Table of Contents
TROX GmbH TNC-70113 Heat Shrink Cap
Product Information
Specifications
- Product Name: TNC-70113
- Casing Material: Plastic
- Packaging Unit: 10 pieces
- Standard Description: Heat shrink cap to protect the ends of flat cables, TNC-70113 (pack of 10 pieces)
- Manufacturer: TROX GmbH or equivalent
Product Usage Instructions
Application
The TNC-70113 heat shrink cap is designed to protect the ends of flat cables. It is commonly used to prevent short circuits and to protect cable ends from moisture and accidental contact. It can be used in various applications where flat cables are used.
Installation
- Ensure that the cable ends are clean and free from any dirt or debris.
- Slide the TNC-70113 heat shrink cap onto the end of the flat cable.
- Apply heat to the heat shrink cap using a heat gun or other suitable heat source. The heat will cause the cap to shrink and tightly seal the cable end.
- Allow the heat shrink cap to cool down before handling the cable.
Additional Products
To enhance the usage of the TNC-70113 heat shrink cap, the following additional products are available:
- TNC-A4000 Flat cable (100 m)
- TNC-70381 Flat cable distributor
- TNC-70413 End seals (10 pieces)
- TNC-70067 Cable clips for flat cables (100 pieces)
- TNC-DP connector
Frequently Asked Questions (FAQ)
- Q: What is the purpose of the TNC-70113 heat shrink cap?
- A: The TNC-70113 heat shrink cap is designed to protect the ends of flat cables from moisture and accidental contact, preventing short circuits.
- Q: How many pieces are included in a pack of TNC-70113 heat shrink caps?
- A: A pack of TNC-70113 heat shrink caps contains 10 pieces.
- Q: What is the recommended method for shrinking the TNC-70113 heat shrink cap?
- A: The TNC-70113 heat shrink cap can be shrunk by applying heat using a heat gun or other suitable heat source.
PARTS
TNC-70113
HEAT SHRINK CAP TO PROTECT THE ENDS OF FLAT CABLES
All products are of high quality and meet the requirements of AS-Interface
- Asymmetrically shaped cable to ensure error-free connection (reverse voltage protection)
- Easy wiring due to flat cable insulation displacement connectors (‘click and go’)
- Protection level up to IP 67
Application
- To prevent short circuits, cable ends (bare wire ends) should be protected from moisture and accidental contact
- Protect cable ends with an end seal (TNC-70413) or with a heat shrink cap (TNC-70113)
TECHNICAL INFORMATION
Standard description (characteristics)
Heat shrink cap to protect the ends of flat cables, TNC-70113 (pack of 10
pieces).
- Casing materials: plastic
- Make: TROX GmbH or equivalent
- Type: TNC-70113
Useful additions
- TNC-A4000 Flat cable (100 m)
- TNC-70381 Flat cable distributor
- TNC-70413 End seals (10 pieces)
- TNC-70113 Heat shrink caps (10 pieces)
- TNC-70067 Cable clips for flat cables (100 pieces)
- TNC-DP connector
References
- TROX UK - Industry leading manufacturers and suppliers of superior quality air conditioning, ventilation, fire and smoke protection systems, components and controls | TROX UK Ltd
- CONTACT | TROX UK Ltd
- Disclaimer | TROX UK Ltd
- Imprint | TROX UK Ltd
- OUR PRIVACY POLICY | TROX UK Ltd
- TROX UK's Terms and Conditions of Sale | TROX UK Ltd
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>