KCT GWB202 65-80L Wheel Barrow Installation Guide
- June 16, 2024
- KCT
Table of Contents
Installation Guide
65-80L Wheel Barrow
GWB202 65-80L Wheel Barrow
Imported by:
KCT Direct Glebe Form, Old London Road, Copdock, Ipswich, Suffolk, IP8 3JN,
United Kingdom
A 1X – Steel Base
B 2X – Arms
C 2X – Legs
D 1X – Wheel
E 6X – 8x40mm Bolts
F 1X – 10x120mm Wheel Bolt
G 1X – 12mm Washer & Nut
H 8X- 8mm Flat Washers, Spring Washers & Nuts
I 1X – 16x9mm Wheel Spacer
J 2x-6x40mm Bots
-
Using Parts (J) + (H), join Frame Sections (B)+(C) together.
Bolt > Washer > Frame > Spring Washer > Nut
-
Attach one complete Frame Section to the Steel Base (A) with 3x (E) + (H)
The front end of the frame should have the thinner edge on the inside.
Do not fully tighten at this point.
-
Fit the wheel to first frame part using (F) + (I)
-
Secure the Wheel by attaching the second complete Frame Section.
-
Attach the rest of the second frame to the Stee! Base (A).
-
Fully tighten all fixings before use.
Contact us: help@kctdirect.co.uk
Web: www.kctdirect.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>