KCT PGT301 Wall Mount Garage Storage Unit Bin Organisers Instructions
- June 16, 2024
- KCT
Table of Contents
32 Piece Wall Mounted Storage
User Instructions – Please keep for future reference
PGT301
ArtVer#1
Instructions
Mount on a solid wooden base that can support the weight when the
Inspect the mounting surface to make sure that there are no hidden electrical
wires, cables or pipes.
Align slots in perforated panels (Fig. 1 # 3) so that the slots holding the
containers are open on the top.
Hold perforated boards against the surface on which they are to be mounted and
align them with the help of a spirit level.
Now set the mark for the 8 mounting holes.
After checking the mounting surface for potential wiring etc. drill the 8
mounting holes and then mount the perforated boards to the wall.
Hang display boxes from the perforated boards by gripping the rear lip of the
display boxes and slotting them into the open slot of the perforated board.
Hang the smaller boxes from the upper 3 rows and the larger boxes in the 2
lower rows.
| Part Number | Description | Number |
|---|---|---|
| 1 | Red Boxes | 18 |
| 2 | Black Boxes | 12 |
| 3 | Black Hole Boards | 2 |
| 4 | Screws | 8 |
| 5 | Wall Plugs | 8 |
IMPORTANT
Please wear the appropriate protective equipment during assembly as parts may
have sharp edges.
Ensure wall fixings are suitable for your wall surface/type.
Do not assemble if parts are missing or do not fit correctly.
Make sure the unit is fully assembled and sturdy once assembly is complete.
Imported by:
KCT Leisure
Glebe Farm, Old London Road
Copdock
Ipswich, Suffolk
IP8 3JN
United Kingdom
Documents / Resources
| KCT
PGT301 Wall Mount Garage Storage Unit Bin
Organisers
[pdf] Instructions
PGT301 Wall Mount Garage Storage Unit Bin Organisers, PGT301, Wall Mount
Garage Storage Unit Bin Organisers, Storage Unit Bin Organisers, Unit Bin
Organisers, Bin Organisers
---|---