LITETRONICS OLAPC1 3 Pin Photocontrol for Area Light and Flood Light Instruction Manual
- June 16, 2024
- Litetronics
Table of Contents
LITETRONICS OLAPC1 3 Pin Photocontrol for Area Light and Flood Light
Instruction Manual
SAFETY INSTRUCTIONS AND WARNINGS
- When using electrical equipment, basic safety precautions should always be observed
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved
- Installation should only be conducted by a qualified electrician in accordance with NEC and any relevant local building codes.
- Be certain electrical power is OFF before and during installation and maintenance.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or sharp objects.
WHAT COMES IN THE BOX
INSTRUCTIONS
Before Installation, carefully remove all parts from the packaging. Inspect product for defects due to shipping. Always turn off the power supply from main circuit breaker first!
PHOTOCONTROL INSTALLATION
- Turn off power.
- Photocontrol should be installed on the back of light. Replace shoriting cap with photocontrol. (Figure 1)
- Make sure the installation is complete and secure before turning on the pow
Thank you for choosing
6969 W. 73rd Street
Bedford Park, IL 60638
WWW.LITETRONICS.COM
[email protected] or
1-800-860-3392
The information and product specifications contained in these instructions
are based upon data believed to be accurate at the time of printing. This
information is subject to change without notice and without incurring
liability. If you have questions regarding specific product details, please
contact us at800-860-3392 or via email
at [email protected].
To check for an updated version of these instructions, please visit
www.litetronics.com
