ROLINE 12041101 USB 2.0 4 Port Extender Kit 50m Power Over Cable User Manual
- June 16, 2024
- ROLINE
Table of Contents
USB 2.0 4-port Extender Kit 50m
Power Over Cable
12.04.1101
User Manual
INTRODUCTION
Congratulations on your purchase of this USB 2.0 Extender. This USB.2.0 Extender is capable of sending data across a Cat.5/5e/6 cable up to 50 meters at data rate of Hi-Speed (480Mb/s), Full Speed (12Mb/s) and Low Speed (1.5Mb/s). Setting up the USB 2.0 Cat.5 Extender is quite simple. Plug the RJ-45 connectors into the ports. It takes only minutes to setup, and there is no configuration necessary. The Extender is USB 2.0 compliant and is backward compatible with USB 1.1/1.0.
PACKAGE CONTENT
Before installation, please check if following items are included in the package:
| • Transmitter Unit | X1 |
|---|---|
| • Receiver Unit | X1 |
| • User Manual | X1 |
| • Power Adapter (24V/0.5A) | X1 |
| • USB AM-BM cable | X1 |
FEATURES
-
Supports date transfer rates of 1.5Mb/s, 12Mb/s, 480Mb/s.
-
Product consists of two electronic modules, a “Transmitter unit” and a “Receiver unit”.
-
Receiver unit is built in 4- port hub to connect (4) USB 2.0 devices.
-
Units can be connected by a standard Cat. 5 cable or higher, which extends
USB devices up to 50m. -
Wall mounting is integrated in the metal housing.
-
Supports Hot Plug & no software driver is required
-
Power supply for Transmitter unit is included.
Transmitter Unit
Receiver Unit
| ITEM | TYPE | DESCRIPTION |
|---|---|---|
| 1 | PWR LED (Red) | LED turns on when power supply is from Transmitter unit. |
Off when no power is supplied.
2| LINK LED (Green)| Indicates that a valid interconnection between
Transmitter Unit and Receiver Unit is established via LAN cable
3| ACT. LED (Amber)| The LED flash mean that this Extender links to PC/NB
properly & a device is plugged in to the downstream port
INSTALLATION
- Connect the Transmitter Unit to the Host System (or PC) via an USB Cable (A Male to B Male).
- Plug the 24V/0.5A DC Power Supply into the USB 2.0 Extender Transmitter Unit. Plug the AC power cord of the power supply into an available electrical outlet.
- Connect the USB 2.0 Extender Transmitter Unit and Receiver Unit together with a LAN Cable (supplied by user).
- Connect USB Device(s) to the Receiver Unit.
- Check the LED on the USB 2.0 Extender Receiver Unit. Make sure that the ACT. LED flashes, which means that the extenders are powered and are communicating.
System Requirements
- Windows XP/7/Vista/8/8.1/10
- Mac OS
Specifications
| Transmitter Unit | Upstream Port | USB Type B Female |
|---|---|---|
| Downstream Port | RJ45 Jack | |
| Power | Bus-Powered (Transmitter) |
Self-Powered 24V/0.5A (Receiver)
Dimensions| 66 x 60 x 24 mm
Receiver Unit| Upstream Port| RJ45 Jack
Downstream Port| USB Type A Female x4
Dimensions| 66 x 110 x 25 mm
Interconnect Cable| Standard LAN Cable
Max Cable Length| 50m
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>