ROLINE RGS-3084M Gigabit Ethernet Switch User Manual
- May 15, 2024
- ROLINE
Table of Contents
ROLINE Gigabit Ethernet Switch,
6x (5xGbE + 1x Gbic(SFP), 4x PoE+)
21.14.3524
User Manual
Product Overview
This is a 6-port Gigabit Ethernet Switch with 4 PoE+ PSE ports and 1 dual-
speed SFP slot.
It delivers data and electric power via Ethernet cables to PoE devices such as
IP cameras and wireless access points. It supports both PoE and PoE+ devices
with 85W power budget. With compact and lightweight housing design, the switch
is suitable for SOHO and small business offices.
Product Features
- Provides five 10/100/1000Mbps RJ-45 ports and one dual-speed SFP slot
- Four 802.3at-compliant PoE PSE ports
- All copper ports support auto-negotiation and auto-MDI/MDI-X detection
- Supports IEEE 802.3x flow control
- Supports jumbo frame length up to 9K bytes at full wire speed forwarding
- Supports IEEE 802.3az Energy Efficient Ethernet
- Supports IEEE 802.1p QoS classification
- Supports loop detection
Hardware Overview
Note: Please turn off the power switch when inserting the DC plug.
LED Description
Following is the LED description:
LED | Color | Status | Operation |
---|---|---|---|
Power | Green | On | The switch is powered on. |
LAN Link/Activity | Green | On | The port is operating at 1000 Mbps. |
Blink | Transmitting / Receiving data at 1000M | ||
Amber | On | The port is operating at 10/100 Mbps. | |
Blink | Transmitting / Receiving data at 10/100M | ||
SFP Link/Activity | Green | On | The port is operating at 1000 Mbps. |
Amber | On | The port is operating at 100 Mbps. | |
Green / Amber | Blink | Transmitting / Receiving data | |
PoE | Amber | On | Delivering Power to PoE device |
Loop Detection
When a loop occurrence is detected, the associated port with smaller port number will be blocked by the switch. Upon trouble-shooting the blocked port can be easily identified because it is cable connected and has a port link down function. If the loop is fixed, the blocked port can be released by re- plugging the cable. The port is recovered to operate.
QoS
Each received packet is examined and classified into one of eight priority
classes and uses User Priority tag values in the received IEEE 802.1Q packet
to map to one priority class.
The egress port policy as follows:
**Packets Tag priority*** | Weight | |
---|---|---|
0 | lowest | 1 |
1 | 2 | |
2 | ||
3 | 4 | |
4 | ||
5 | ||
6 | 8 | |
7 | highest |
*: Priority Field in Tagged LAN frames.
Package Contents
- The switch unit
- One Power adapter and One Power cord
- Four Rubber feet, Wall mount kit and Magnet kit
Technical Specifications
Specifications
Standard| IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
IEEE 802.3ab 1000Base-T, IEEE 802.3x Flow Control, IEEE 802.3af PoE, IEEE
802.3at PoE+
Network Ports| 5 10/100/1000Mbps Gigabit copper ports
Shielded RJ-45, auto-negotiation, auto-MDI/MDI-X support 1 100Mbps or 1000Mbps
fiber SFP port: SFP supports standard SFP fiber transceiver installation
Network Cables| 10/100/1000Mbps Copper: Cat. 5, 5e or higher up to 100m
100/1000Mbps Fiber: MMF 50/125mm, 62.5/125mm, SMF 9/125mm
Power over Ethernet| PSE on Port 1 ~ Port 4, 30W max. per port output
PSE pin 1/2 – Positive DC, Pin 3/6 – Negative DC
PoE Power Budget| 85W max. shared by 4 PSE ports
PoE Protection| Incompliant PD detection, Disconnection, Over-current, Short-
circuit
MAC Address Table| 2K entries
Buffer Memory| 128K bytes
Jumbo Frame| Up to 9K bytes
Dimension| 147 x 106 x 28mm (W x D x H)
Power Consumption| 5W max.(without PoE), 90W max.(with PoE full output)
Power| External Power 54V/1.67A
Temperature| Operating: 0℃ ~ 40℃, Storage: -20℃ ~ 70℃
Humidity| 5% ~ 90% (non-condensing)
The information contained in this document is subject to change without prior
notice.
Copyright © All Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>