ROLINE 21131174 10/100/1000Base T to Dual Speed Fiber Media Converter User Manual
- March 16, 2024
- ROLINE
Table of Contents
ROLINE 21131174 10/100/1000Base T to Dual Speed Fiber Media Converter
Product Information
Specifications:
- Hardware Standard: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-X, IEEE 802.3x Flow Control
- Network Ports:
- 1* 10/100/1000Mbps Gigabit copper port: Auto-negotiation, Auto MDI/MDI-X support
- 1* 100/1000Mbps Dual-speed fiber SFP port: SFP supports standard SFP fiber transceiver installation
- Jumbo Frame Size: Up to 9.2k bytes
- Dimension: 60 x 75 x 23 mm (WxDxH)
- Power Input: +5VDC via external power adapter
- Power Consumption: 2W max.
- Environment:
- Temperature: 10% ~ 90%
- Humidity: Non-condensing
Product Usage Instructions
Package Content:
The package includes the Media Converter and an External Power Adapter.
Features:
- Tri-speed 10/100/1000Mbps copper to dual-speed 1G/100Mbps fiber conversion
- Supports full wire speed conversion for Gigabit copper to Gigabit fiber
- Complies with IEEE 802.3, 802.3u, 802.3ab, 802.3z standards
- Supports auto-negotiation and auto-MDI/MDI-X detection
- Supports transparent conversion of any packet types
- Provides link fault pass through function
- Supports jumbo frames up to 9.2K bytes
- Supports 802.3x flow control
Hardware Overview:
Refer to the Front and Rear views in the user manual for a detailed hardware overview.
LED Indicator:
LED | Color | Status |
---|---|---|
PWR (Power) | Green | Indicates Power is on/off |
LAN / Fiber (Link / Act) | Green/Orange | Status: On/Off/Blinking |
-
The port is operating at 1000Mbps TX/RX Activity
(1000Mbps) -
The link is disconnected
-
Copper port is operating at 10/100Mbps and Fiber port is
operating at 100Mbps TX/RX Activity (10/100Mbps on copper and
100Mbps on fiber)
FAQ
Q: How do I install the standard SFP fiber transceiver?
A: To install the standard SFP fiber transceiver, follow these steps: Step 1: Power off the media converter. Step 2: Locate the SFP port on the media converter. Step 3: Remove the protective cap from the SFP port. Step 4: Insert the SFP fiber transceiver into the port until it clicks into place. Step 5: Power on the media converter and verify the connection.
Q: What is the maximum jumbo frame size supported by the media converter?
A: The media converter supports jumbo frames up to 9.2K bytes.
Package Content
- Media Converter
- External Power Adapter
Features
- Tri-speed 10/100/1000Mbps copper to dual-speed 1G/100Mbps fiber conversion
- Supports full wire speed conversion for Gigabit copper to Gigabit fiber
- Complies with IEEE 802.3, 802.3u, 802.3ab, 802.3z standards
- Supports auto-negotiation and auto-MDI/MDI-X detection
- Supports transparent conversion of any packet types
- Provides link fault pass through function
- Supports jumbo frames up to 9.2K bytes
- Supports 802.3x flow control
Hardware Overview
LED Indicator
LED | Color | Status | Indicates |
---|---|---|---|
PWR (Power) | Green | On | Power is on |
Off | Power is off | ||
LAN / Fiber (Link / Act) | Green | On | The port is operating at 1000Mbps |
Blinking | TX/RX Activity (1000Mbps) | ||
Off | The link is disconnected | ||
Orange | On | Copper port is operating at 10/100Mbps and Fiber port is |
operating at 100Mbps
Blinking| TX/RX Activity (10/100Mbps on copper and 100Mbps on fiber)
Off| The link is disconnected
Technical Specifications
Hardware
Standard| IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T,
IEEE 802.3z 1000Base-X, IEEE 802.3x Flow Control
Network Ports| 1* 10/100/1000Mbps Gigabit copper port :Auto-negotiation, Auto MDI/MDI-X support
1*100/1000Mbps Dual-speed fiber SFP port:
SFP supports standard SFP fiber transceiver installation
Jumbo Frame Size| Up to 9.2k bytes
Dimension| 60 x 75 x 23 mm (WxDxH)
Power Input| +5VDC via external power adapter
Power Consuption| 2W max.
Environment
Temperature| Operating Temperature: 0° ~ 40°C
Storage Temperature: -20° ~ 70°C
Humidity| 10% ~ 90% (non-condensing)