ROLINE 12041102 USB 2.0 Cat. Extender 50m Power Over Cable User Manual
- May 15, 2024
- ROLINE
Table of Contents
ROLINE 12041102 USB 2.0 Cat. Extender 50m Power Over Cable
Specifications
Transmitter Unit
- Upstream Port: USB Type B Female
- Downstream Port: RJ45 Jack
- Power: Bus-Powered (Transmitter), Self-Powered (Receiver)
- Dimensions: 66 x 60 x 24 mm
Receiver Unit
- Upstream Port: RJ45 Jack
- Downstream Port: USB Type A Female
- Dimensions: 66 x 60 x 23 mm (1-port)
Interconnect Cable: Standard LAN Cables
Max Cable Length: 50m
Product Usage Instructions
Installation
- Connect the Transmitter Unit to the Host System (or PC) via USB Cable (A Male to B Male).
- Plug the 24V/0.5A DC Power Supply into the USB 2.0 Extender Transmitter Unit. Plug the AC power cord of power supply into an available electrical outlet.
- Connect the USB 2.0 Extender Transmitter Unit and Receiver Unit together with a LAN Cable (supplied by user).
- Connect USB Device(s) to the Receiver Unit.
- Check the LED on the USB 2.0 Extender Receiver Unit. Make sure that the ACT. LED flashes, which means that the extenders are powered and are communicating.
System Requirements
- Windows XP/7/Vista/8/8.1/10
- Mac OS
FAQ
-
Q: How long is the maximum cable length supported by this USB 2.0 Extender?
A: The maximum cable length supported is 50 meters. -
Q: What are the supported data transfer rates of this USB 2.0 Extender?
A: The USB 2.0 Extender supports data transfer rates of 1.5Mb/s, 12Mb/s, and 480Mb/s.
INTRODUCTION
Congratulations on your purchase of this USB 2.0 Extender. This USB.2.0 Extender is capable of sending data across a Cat.5/5e/6 cable up to 50 meters at data rate of Hi-Speed (480Mb/s), Full Speed (12Mb/s) and Low Speed (1.5Mb/s). Setting up the USB 2.0 Extender is quite simple. Plug the RJ-45 connectors into the ports. It takes only minutes to setup, and there is no configuration necessary. The Extender is USB 2.0 compliant and is backward compatible with USB 1.1/1.0.
PACKAGE CONTENT
Before installation, please check if following items are included in the package:
- Transmitter Unit X1
- Receiver Unit X1
- USB AM-BM cable X1
- User Manual X1
- Power Adapter (24V/0.5A) X1
FEATURES
- Supports date transfer rates of 1.5Mb/s, 12Mb/s, 480Mb/s
- Product consists of two electronic modules, a “Transmitter unit” and a “Receiver unit”.
- Receiver unit can connect 1 USB 2.0 device.
- Units can be connected by a standard Cat. 5 cable or higher, which extends USB devices up to 50m.
- Wall mounting is integrated in the metal housing
- Supports Hot Plug & no software driver is required.
- Power supply for Transmitter unit is included.
Transmitter Unit
Receiver Unit
INSTALLATION
- Connect the Transmitter Unit to the Host System (or PC) via USB Cable (A Male to B Male).
- Plug the 24V/0.5A DC Power Supply into the USB 2.0 Extender Transmitter Unit. Plug the AC power cord of power supply into an available electrical outlet.
- Connect the USB 2.0 Extender Transmitter Unit and Receiver Unit together with a LAN Cable (supplied by user).
- Connect USB Device(s) to the Receiver Unit.
- Check the LED on the USB 2.0 Extender Receiver Unit. Make sure that the ACT. LED flashes, which means that the extenders are powered and are communicating.
System Requirements
- Windows XP/7/Vista/8/8.1/10
- Mac OS