GRACE Grab Rail Instruction Manual
- June 16, 2024
- GRACE
Table of Contents
GRACE Grab Rail Instruction Manual
Instruction Guide
-
Mark your holes using a pencil.
-
Using a Ø 4.5 mm drill bit, drill holes 40 mm deep.
-
Insert screw into the holes and tighten them using the spanner provided.
-
Slide and twist cover until its flush with the wall
IMPORTANT INFORMATION
Before Installing please identify that you have all the kit parts as listed below.
Proper fitting of this item is extremely important.
This is suitable for DIY fitments however if the necessary tools and expertise are not available, we would recommend installation by a qualified tradesperson.
Ensure your wall is in sound condition prior to fitting.
The screws provided are for wood only or for use with suitable plastic wall plugs.
Ensure that no hidden pipes or cables will interfere when installing.
Ensure that eye protection is worn throughout the installation.
Kit Parts Included
-
Grab Rail
-
6x Screws
-
Spanner
Tools for installation
-
Power Drill
-
Optional Spirit Level
-
Pencil
-
4.5mm Drill bit
-
Optional Measuring Tape