LITETRONICS HBSAD80 Round High Bay SL Reflector Lens Installation Guide
- June 15, 2024
- Litetronics
Table of Contents
Round High Bay SL
Clear Reflector Lens
Installation Instructions for
90 Degree PC Clear Reflector Lens (HBSAD80)
WHAT COMES IN THE BOX
Round High Bay SL Reflector Lens comes with the following standard parts:
Before Installation, carefully remove all parts from the packaging.
Inspect product for defects due to shipping.
Refer to Round High Bay SL Installation Instructions for reference.
-
Turn off power of lamp.
-
Place and align diffuser over 4 holes of the Round High Bay SL frame.
-
Place the 4 screws into the 4 lens and 4 frame holes to hold diffuser into place.
-
Tighten all 4 screws, lock washer and washer through each diffuser hole to the Round High Bay SL frame.
Note: Orientation of screw and washers. -
Turn power back on.
Diffuser attached to Round High Bay SL
Thank you for choosing
6969 W. 73rd Street
Bedford Park, IL 60638
WWW.LITETRONICS.COM
CustomerService@Litetronics.com or
1-800-860-3392 The information and
product specifications contained in these instructions
are based upon data believed to be accurate at the time of printing.
This information is subject to change without notice and without incurring
liability. If you have questions regarding specific product details, please
contact us at 800-860-3392 or via email
at customerservice@litetronics.com.
To check for an updated version of these instructions,
please visit www.litetronics.com.
11/10/23 – V1.1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>