SPORTS ATTACK 4251 Volleyball Pitching Machine Instruction Manual

SPORTS ATTACK 4251 Volleyball Pitching Machine

Product Information

Specifications

• Manufacturer: Sports Attack LLC.
• Contact: 800.717.4251
• Website: www.sportsattack.com
• Patents: Patents applied for
• Warranty: 5 years for institutional and residential use, 1 year for commercial environments
• Throwing Wheels Warranty: 2 years
• Electronic Controller Warranty: 2 years
• Throwing Wheel Motors Warranty: 2 years

Product Usage Instructions

Warranty/Shipping:
The Volleyball Pitching Machine comes with a warranty to ensure quality and performance. The warranty period is five (5) years from the date of original purchase for institutional and residential use, and one (1) year for commercial environments. Specific components have varying warranty periods:

• Throwing Wheels: 2 years
• Electronic Controller: 2 years
• Throwing Wheel Motors: 2 years

Please note that the warranty does not cover cosmetic issues, normal wear and tear, misuse, misapplication, improper assembly, modification without express written permission from Sports Attack, damage in transit, accidents unrelated to equipment operation, or damage caused by fire, flood, or act of God. If you encounter any issues during the warranty period, contact Sports Attack’s customer service department at 800.717.4251. They will assist you in resolving the problem, provide replacement parts if necessary, and cover pre-approved labor charges.

EFFECTIVE IMMEDIATELY: Warranty components such as motors now require a picture of the component when submitting a replacement request.

Returns:
If you are not satisfied with the Volleyball Pitching Machine, you can return it within 30 days of receipt for a full refund, less a 15% restocking fee. The cost of shipping the unit back to Sports Attack will be the responsibility of the purchaser. Please note that any non-cosmetic damage to the machine may further reduce the refund amount. To initiate a return, contact Sports Attack’s customer service department at 800.717.4251.

Registering Warranty:
To register the warranty for your Volleyball Pitching Machine, visit the warranty registration page on the Sports Attack website.

Repairs and Service:
For repairs and service after the warranty period, contact Sports Attack’s customer service department at 800.717.4251 or fax them at 775.345.2883.

Shipping Damage Claims Procedure:
Note that the equipment in your shipment has been carefully inspected and packaged by skilled personnel before leaving the factory. If you encounter any shipping damage, follow the claims procedure below:

1. Contact Sports Attack’s customer service department immediately at 800.717.4251 to report the damage.
2. Provide them with all relevant information and documentation regarding the damage.
3. They will guide you through the process of filing a shipping damage claim.

Frequently Asked Questions (FAQ):

• Q: How long is the warranty period for the Volleyball Pitching Machine?
  A: The warranty period is five (5) years for institutional and residential use and one (1) year for commercial environments. Specific components have different warranty periods.

• Q: What is covered by the warranty?
  A: The warranty covers material and workmanship issues of the machine. Specific components like throwing wheels, electronic controller, and throwing wheel motors have their own warranty coverage.

• Q: How do I initiate a return?
  A: To initiate a return, contact Sports Attack’s customer service department at 800.717.4251.

• Q: How long do I have to return the product?
  A: You have 30 days from the date of receipt to return the Volleyball Pitching Machine.

WARRANTY STATEMENT

What is most important to Sports Attack is that your machine meets your expectations of quality and performance. We stand behind the material and workmanship of our machines for five (5) years from the date or original purchase for institutional and residential use and one (1) year for commercial environments, with the following exceptions:

• Throwing Wheels are warranted for two (2) years;
• Electronic Controller is warranted for two (2) years; and,
• Throwing Wheel Motors are warranted for two (2) years.

This warranty excludes any cosmetic issues or normal wear and tear of the unit, and is not in effect if the machine has been misused, misapplied, improperly assembled, or modified without the express written permission of Sports Attack. In addition, this warranty does not apply to damage in transit, in any accident unrelated to the direct operation of the equipment, or by fire, flood or act of God.
If you encounter any issues during the warranty period, Sports Attack will quickly get your machine back in working order. If the warranty repair involves a replacement part, we will make sure you get both the part and easy instructions for replacement at no cost to you. If a service person is needed, Sports Attack will pay the pre-approved labor charge to get your machine back in working order.
EFFECTIVE IMMEDIATELY: Warranty components such as motors, etc. now require a picture of the component when submitting a replacement request. Please know that any problem can quickly be resolved with a phone call to our experienced, responsive customer service department at 800.717.4251. We are here to answer your questions and to make sure your machine provides you with years of service.

RETURNS
Sports Attack manufactures the highest quality sports training equipment in the world. If for any reason you are not satisfied, a machine can be returned within 30 days of receipt for any reason for a full refund less a 15% restocking fee. Cost of shipping the unit back to Sports Attack will also be the responsibility of the purchaser. Please note that the refund amount may be reduced by any non-cosmetic damage to the machine.
If you have any questions or concerns, please give our experienced, responsive customer service department a call at 800.717.4251.

SHIPPING DAMAGE CLAIMS PROCEDURE

NOTE: For your protection, please note that the equipment in this shipment was carefully inspected and packaged by skilled personnel before leaving the factory. Upon acceptance of this shipment, the transportation company assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1. VISIBLE LOSS OR DAMAGE: Be certain that any visible loss or damage is noted on the freight bill or express receipt, and that the note of loss or damage is signed by the delivery person.
2. FILE CLAIM FOR DAMAGE IMMEDIATELY: Regardless of the extent of the damage.
3. CONCEALED LOSS OR DAMAGE: If damage is unnoticed until the merchandise is unpacked, notify the transportation company or carrier immediately, and file a “CONCEALED DAMAGE” claim with them. This must be done within fifteen (15) days from the date the delivery was made to you. Be sure to retain the container for inspection.
   Sports Attack LLC. cannot assume liability for damage or loss incurred in transit. We will, however, at your request, supply you with the necessary documents to support your claim.

INTRODUCTION

Thank you for purchasing this Sports Attack LLC. equipment.
Proper assembly, careful operation and consistent maintenance of this equipment will ensure that it gives you the very best performance and a long, economical service life. This manual contains the information needed to properly set up the Skill Attack, as well as to use, care for and maintain the Skill Attack in a manner that will ensure its optimum performance.

RECEIVING THE PRODUCT
Please check the contents of your boxes to ensure you have received all parts for the machine. If anything is missing or damaged, call Sports Attack Customer Service, at 800-717-4251. If the product or package has been damaged in shipping, note on the shipping tag, save all evidence of damage along with related documents and contact the shipper immediately.

SAFETY INSTRUCTIONS

ELECTRICAL SAFETY
Use a 115-volt single-phase 3-wire (2-wire with ground) grounded power source. Up to 200 ft. from power source, use a minimum #14/3 grounded 3-wire 15 amp minimum rating extension cord. Over 200 ft. from power source, consult a licensed electrician for required power cord size.

OPERATING SAFETY
CAUTION: Carefully check Skill Attack for completeness and condition before connecting to electrical power:

1. Never reach hands into the throwing wheel area.
2. Always use the Skill Attack with throwing wheel guards in place.
3. Use the Skill Attack only under adult supervision.
4. Use the Skill Attack only for its intended purpose.
5. Do not operate the Skill Attack with a damaged cord or plug if the machine malfunctions or has been damaged.
6. Check machine before turning “ON” to make sure there are no foreign object in feed chute.
7. If ball becomes lodged and stops motor, immediately turn the Skill Attack “OFF” before dislodging.
8. To dislodge ball from throwing wheel, unplug machine and push ball through chute. Do not reach hand into feed chute with the machine running.
9. Only one person at a time should operate the Skill Attack.
10. Do not allow anyone to walk directly in front of the machine. Keep face and hands away from ball exit.
11. A ball should always be test thrown from the Skill Attack before beginning any drill. Throw several balls to verify end location. Refer to ball manufacturer for proper inflation requirements.
12. Keep hands, hair and loose clothing away from moving parts.
13. Do not use near water or use damp balls.

ASSEMBLY INSTRUCTIONS

Tools required: Wrench for casters (provided. See Figure 2).

• STEP ONE
  Lay out all parts and check them against parts list. Call customer service immediately if any parts are missing. Please have applicable part numbers as shown on parts list (See page 10).

• STEP TWO
  Screw on casters to the end of legs. Tighten with the wrench provided (See Figure 2).

• STEP THREE
  Insert the three legs into tripod sockets, make sure snap button is in place.

• STEP FOUR
  Remove the carriage bolt and knob from throwing head (See figure 1).

• STEP FIVE
  Attach throwing head into the tripod assembly.

• STEP SIX
  Attach the carriage bolt and knob. Make sure its tight.

Assembly is now complete and your Skill Attack Volleyball Machine is ready for use. See instructions in the manual and on the decals on the machine for operating procedures and options.

To order additional parts, please call:
Sports Attack Customer Service Department
Ph 800.717.4251
Fx 775.345.2883

SKILL ATTACK OPERATION

The Skill Attack is the perfect individual training machine. No special training other than the complete careful reading of this manual is required to operate.

INCREASE OR DECREASE SPEED

1. Before turning machine “ON,” turn dials located on the throwing head to the “OFF” position.
2. Turn power switch to “ON.” Turn speed control knobs clockwise to turn the machine “ON” and to increase speed.
3. Turn the speed control knobs counterclockwise to decrease speed.

BALL SPIN, BREAK OR MOVEMENT

1. Floater – Both knobs turned to the same setting, making the wheels spin at the same RPM.
2. Top Spin – Upper wheel turning fast, lower wheel turning slowly. Variations of the ball spin and break are determined by the wheel speeds.

HORIZONTAL CONTROL

1. Loosen to vary direction.
2. Tighten for repeatability.

SKILL ATTACK SHUTTING DOWN

• TURNING SKILL ATTACK “OFF”
  • Set each speed control dial to “0.”
  • Turn the on/off switch “OFF.”
  • Unplug Skill Attack from the power source.
• TRANSPORTING

1. Turn the machine “OFF” and unplug.
2. Detach throwing head from tripod and carry. See Figure 3.

CARE & CLEANING

LUBRICATION

1. Once per season, or as required.
2. Throwing wheel motors are sealed and require no lubrication.

EXAMINE THE MACHINE
Examine Skill Attack for condition and completeness before every use:

1. Throwing wheels must be tight on the motor shafts.
2. Check that the keyway retaining bolts are tight.
3. Wheel guard and ball chute must be securely fastened to the throwing head.

COMPONENT REPLACEMENT

THROWING WHEEL REPLACEMENT

1. Turn the power switch “OFF” and unplug the power cord.

2. Hold the wheel so that it cannot move. Turn the retaining screw counterclockwise using a 1/2” open-end wrench.
   SUGGESTION: If the screw is too tight, give the opposite end of the wrench a series of light taps with a hammer making sure the wrench remains on the screw.

3. Remove the screw.

4. Work the wheel off of the motor shaft.

Reassemble in reverse order.

• a. Install wheel to motor shaft.
• b. Test the wheel by spinning it by hand and making sure that it spins freely without wobble before turning the unit “ON.”
• c. Be sure the wheel guard is properly and securely reinstalled.

MOTOR REPLACEMENT

1. Turn the power switch “OFF” and unplug the power cord.
2. Remove the throwing wheel.
3. Remove four screws holding controller into main control box. Note the position of the motor wires on the controller, then disconnect the wires.
4. Note the routing of the motor wires. Loosen any wire clamps.
5. Remove bolts holding the motor to the main frame.

Reassemble in reverse order.

CONTROLLER REPLACEMENT

1. Turn the on/off switch “OFF” and unplug the power cord.
2. Remove the four screws holding controller faceplate. Note the position of the main power and motor wires on the controller, then disconnect the wires.
3. Reassemble in reverse order.
   • a. Be sure wires are correctly reinstalled. Motor wire connectors are different sizes. Be sure they are installed on the correct size terminal.
   • b. When attaching the knobs, turn the speed control shafts fully counter-clockwise, then install the knobs with the pointer to “0.”

WIRING

• POWER CORD

  • White or Blue Wire (1)
    To the middle male terminal marked “N.”

  • Black or Brown Wire (2)
    To circuit breaker.

  • Green Wire (3)
    Grounds to machine/motor.

• MOTOR WIRE LEADS

  • White 3/16” wide connectors.
  • Black 1/4” wide connectors.
  • Black Wire (2) connects to A- on the circuit board.
  • White Wire (2) connects to A+ on the circuit board.

• CONTROLLER

  • Black Wire (2)
    2 PR jumper wire:3

  • 1 from on/off switch to circuit breaker

  • 1 from on/off switch to circuit board terminal “L”.

SKILL ATTACK™

SKILL ATTACK PARTS LIST

PARTS LIST KEY

1. 3113-9060-1 Wrench, Skill Caster (Not Shown)
2. 3313-4103-1 Locking Caster
3. 3312-5079-1 Leg, Skill Attack
4. 3312-5071-1 Undercarriage Tripod
5. 3323-6048-1 Horizontal Control Knob
6. 1213-6877-1 Controller Potentiometer Knob
7. 3362-6148-1 Controller Assembly
8. 3312-5073-1 Yoke
9. 3323-6046-1 Elevation Control Knob
10. 3312-5085-1 Ball Feed Chute
11. 3343-5080-1 Throwing Wheel
12. 1332-9836-1 Wheel Motor

SKILL ATTACK™ VOLLEYBALL MACHINE
SPORTS ATTACK, LLC.
800-717-4251
sportsattack.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>