HAKINAKU PTH-10D Carbon Monoxide Detector User Manual
- June 15, 2024
- HAKINAKU
Table of Contents
HAKINAKU PTH-10D Carbon Monoxide Detector User Manual
Specification
Product Model: PTH-10D
Carbon Monoxide Measuring Range: 0-500 ppm (±10%)
Carbon Monoxide Alarm Range: 50-500 ppm (default)
Temperature Measuring Range: 0℃-50℃ (±1.5°C)/32°F-122°F (±2.7°F)
Air Humidity Measuring Range: 20%-90% RH (±5%)
Carbon Monoxide Sensor Type: Electrochemical
Data Refresh Frequency: 2 Seconds
Power Supply: Built-in lithium-ion battery (1000mAh/3.7V)
Charging Input: DC 5V-20V, 65W Max
Compatible Fast Charging Protocol: QC2.0/PD3.0/PE/AFC/FCP/SCP, etc.
Operating Temperature: -10℃-60℃/14°F-140°F
Storage Temperature: -10℃-70℃/14°F-158°F
Product Size: 76 × 70 × 30 mm
Product Weight: 75 g
Packing List: PTH-10D ×1; Type-C charging cable ×1; User manual ×1
WARNING!
This product is a non-household grade carbon monoxide alarm and is not
suitable for use as a household carbon monoxide alarm for long time continuous
monitoring of carbon monoxide concentration at home. The carbon monoxide
measurement values provided are for reference only and cannot be used as the
only basis.
Product Introduction
Screen Display And Button
CO Concentration
Temperature
Air Humidity
Buzzer Status
Battery Level
Light Indication
Light Indication
Button Operation
Long Press The button
Short Press The Button
If there is no button operation within 5 minutes, the device automatically turns down the backlight brightness to enter energy saving mode. You can short press the button to restore the back light to normal brightness.
Set Customized Alarm Threshold
▲ The alarm threshold of carbon monoxide can be adjusted from 25 to 125 ppm. When you use this device in outdoor scenes (such as camping), we recommend you to set the alarm threshold between 25 and 75 ppm. When you use this device in indoor scenes (such as at home or in a car), we recommend you to set the alarm threshold between 75 and 125 ppm.
- Press the button twice quickly to enter setting mode. Then the ones digit flashes.
- Short press the button to adjust the ones digit (0-9 available).
- Short press the button to adjust the tens digit and the hundreds digit at the same time (02-12
- Short press the button to adjust the tens digit and the hundreds digit at the same time (02-12 available).
- Long press the button to confirm the tens digit and the hundreds digit and exit the setting mode.
▲ If there is no button operation within 15 seconds during the setting process, the device automatically saves the current setting values and exits the setting mode.
▲ When the device sounds an audible alarm, you can short press the function
button to temporarily pause the alarm. After 15 seconds, if the carbon
monoxide concentration still exceeds the set alarm threshold, the device will
continue to sound an audible alarm.
WARNING!
When the device sounds an audible alarm, please open the window for
ventilation as soon as possible, then find the source of carbon monoxide and
cut it off.
Low Battery Voltage Alarm
▲ When the battery voltage is lower than the working voltage, the device will sound an audible alarm of “di” every minute. Please charge the battery in time to avoid affecting the battery life.
Attention
- Keep this product away from water, corrosive liquids and fire sources.
- Do not place this product in a environment with temperature over 70°C.
- This product is a precision measuring instrument, please do not disassemble it by yourself.
- Please charge the product with a power adapter that meets the specifications, otherwise the internal parts may be damaged.
- For fast charging, please use a charging cable and a power adapter that both meet the fast charging standard.
- The temperature measurement may be 3°C to 5°C higher than the actual value due to internal circuitry and battery heating when the product is charging.
- When the product is turned on again after a long period of non-use, the product will warm up the internal sensor for about 20 minutes and then display correct measurement values.
- If you are going to store this product for a long time, please fully charge the product and then turn it off.
MADE IN CHINA
Documents / Resources
|
HAKINAKU PTH-10D Carbon Monoxide
Detector
[pdf] User Manual
PTH-10D Carbon Monoxide Detector, PTH-10D, Carbon Monoxide Detector, Monoxide
Detector, Detector
---|---