ViviMAGE Explore 5 Mini Projector User Manual

ViviMAGE Explore 5 Mini Projector

PACKING LIST

NOTICE

FUNCTION OVERVIEW

QUICK START

1. Plug the power cord into an outlet.
2. Take off the lens cover.
3. Connect your device to the projector correctly.
4. Press the Power Button to turn on the projector.
5. Select the correct input source to project your device.
6. Adjust the kickstand accordingly.
7. Adjust the keystone and focus ring to get the best mage performance.
8. Press the Power Button twice to turn off the projector.

INPUT SOURCE

Press 0 /@ on the projector/remote to enter the Interface of Input Source.

• VGA Connection
• HD Connection
• Screen Mirroring
• Multimedia Connection

PROJECTOR CONNECTION

BLUETOOTH

Tip:
Once the projector is connected to your Bluetooth devices, you can adjust the volume of the projected content via the external Bluetooth device as needed.

1. Go to Menu> Sound> Bluetooth, then press OK button to enable the projector’s Bluetooth.
2. Select BT Device by pressing an OK button, the projector will search the nearby Bluetooth devices automatically.
3. Select the name of your Bluetooth device from the searching results to connect. The audio of the projected content will be played from your Bluetooth de11ice after a successful connection.

SCREEN MIRRORING

1. Important:
2. Before screen mirroring, please press the m / ® button on the projector/remote to enter the interface of Input Source and select Screen Mirroring.
3. Press the OK button on the projector/remote to switch the interfaces between Screen Mirroring for iOS System and Screen Mirroring for Android System.

Screen Mirroring through Wireless Connection

For IOS System

Streaming will cellular data

1. Turn on the projector, and select Screen Mirroring as the input source to enter the interface of Screen Mirroring for the iOS System.
2. Go to the settings of your iOS mobile device and connect it to the WiFi of EXPLORE 5-XXXXXX (PWD: 12345678).
3. Activate Screen Mirroring/AirPlay Mirroring function on your iOS mobile de11ice, then search for the projector.
4. Select EXPLORE 5-XXXXXX from the searching results to connect.
5. The display of your iOS mobile device will be projected to the wall/screen via cellular data after a successful
   connection.

Streaming with your router’s WiFi

1. Tum on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring for the iOS System.
2. Go to the settings of your iOS mobile device and connect it to the WiFi of EXPLORE 5-XXXXXX (PWD: 11345678).
3. Visit http://192.168.49.1 from a browser on your mobile device, tap WiFi AP> Scan, and select your router’s WIFI.
4. Your router’s WiFi will be displayed on the interface of Screen Mirroring for iOS System after a successful connection.
5. Get back to the WiFl setting of your iOS mobile device, then connect it to the same router’s WIFI.
6. ActiVc1te Screen Mirroring on your iOS mobile device, then search for the projector and select EXPLORE 5-XXXXXX from the searching results to connect.
7. The live streaming content from your LOS mobile device will be projected to the wall/screen through a WiFi connection.

Tip:
If you’d like to connect to another router’s Wifi, please repeat the procedures mentioned in the section of Streaming with your router’s WiFi.

For (-Android System

To actiVc1te this function, your Android device must support Multi- Screen/Wireless display. Names may differ from different devices.

1. Turn on the projector, select Screen Mirroring as the Input Source, then press the OK button on the projector/remote to switch to the interface of Screen Mirroring for Android System.
2. Activate the Multi-Screen function on your Android device and search for the projector.
3. Select EXPLORE 5-XXXXXX from the searching results to connect
4. Your Android device display will be projected to the wall/screen after a successful connection.

Important Tips for Wireless Connection

1. The fluency of screen mirroring with wireless connection will be affected by the network environment. A bandwidth of lOOMbit or more is recommended when using screen mirroring.
2. Make sure your mobile device is close to the projector when using a wireless connection. A distance of 3.3ft is recommended.
3. Some mobile devices may not support screen mirroring due to compatibility.
4. If the projected image freezes when you switch the screen mirroring interfaces, please long press the OK button for 5 seconds on the projector/remote to do a reset, and the reset process will complete in 2 minutes, please wait patiently.

Upgrade-the Firmware Version of Screen Mirroring

When there is a newer version, you will see Discover new firmware … on the projected screen, please press the OK button on the projector/remote and follow the steps to upgrade the firmware version of screen mirroring as needed.

Note:

1. Make sure the projector is connected to WIFI and DO NOT power off during updating.
2. It takes around 6-8 minutes for the update to complete, please wait patiently.
3. The screen mirroring system will restart once the upgrade is completed.

Tip:
After entering the Interface of Screen Mirroring for the iOS system, you can press and hold the OK button to reset the firmware version of screen mirroring.

Screen Mirroring with the Original USB Cable

For IOS System

1. Turn on the projector, and select Screen Mirroring as the input source to enter the interface of Screen Mirroring for the iOS System.
2. Connect your 105 mobile devices to the USB port of the projector with the ORIGINAL lightning cable.
3. Select Trust in the pop-up window of Trust This Computer.
4. The display of your mobile device will be projected to the wall/screen after a while.

Tip:
If the projection fails, please unplug the lightning cable from the projector and repeat the steps mentioned above.

For Android System

1. Tum on the projector, select Screen Mirroring as the input source, then press the OK button on the projector/remote to switch to the interface of Screen Mirroring for Android System.

2. Go to the settings of your mobile device, find Developer options, and turn on USB debugging.
   Tip:
   The steps to turn on De11eloper options Vc1ry from different models of Android devices. You may check it on the Internet or contact us for the detailed steps. We take Samsung Gallery SB+ as an example.

   • Go to settings of your Android device, then tap About phone> Software information> Build number.
   • Continuously tap on Build number several times until it shows Developer mode had been turned on.
   • Get back to the settings of your mobile device, it will show Developer options. Android device will be projected to the wall/screen.

Tips

1. The USB cable MUST be the ORIGINAL cable or the cable which can transfer the data, otherwise screen mirroring may fail. You can plug the cable into your laptop to check the availability of transferring the data.
2. Some mobile devices may not support screen mirroring due to compatibility.
3. Some Android mobile devices may only transfer the display without audio due to protocol restrictions.

PROJECTION DISTANCE&SIZE

The recommended projection screen is around 95 inches with a projection distance of around 9.84ft. Ambient darkness will improve the clarity of the projected images.

SPECIFICATION

TROUBLESHOOTING GUIDE

Blurry Image

• Adjust focus ring/keystone.
• The projector and screen/wall must be at an effective distance.

Remote Unresponsive

• Make sure the remote points at the IR receiver directly
• Do not cover the IR receiver.
• Try a new pair of AAA batteries.

Upside Down Images
Go to Menu> PICTURE> Projection Direction to flip the projection image.

FCC Statement

Any changes or modifications not expressly approved by the party responsible for compliance could vaid the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This de11ice may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur ln a p,3rtlcular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by tu ming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator&your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDCWarning
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Le present appareil est conforme aux CNR d’lndustrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autoris€e audeux conditions suivantes:

1. l’appareil ne doit pas produlre de broulllage, et
2. l’utilisateur de l’appareil dolt accepter tout brouillage radlo€lectrique subl, m§me si le brouillage est susceptible d’en compromettre le fonctionnement.

The device is compliant with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. The minimum distance from the body to use the device is 20cm,

Le present appareil est conforme
AprE!s examen de ce mat€riel aux conformit€ ou aux limites d’intensit€ de champ RF, les utilisateurs peu11ent sur !’exposition aux radiofl”equences et la conformit€ and compliance d’acqu€rir les informations correspondantes. La distance mini male du corps a utiliser le dispositif est de 20cm.

CAUTION
The symbol indicates. voltage

RECYCLING

This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. This product can be used across EU member states.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>