SUMMIT CK54ADA Dishwasher Refrigerator Instructions

: June 14, 2024
: SUMMIT

Table of Contents

SUMMIT CK54ADA Dishwasher Refrigerator
Product Information
Specifications
Product Usage Instructions
FAQ
INSTALLATION INSTRUCTION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SUMMIT CK54ADA Dishwasher Refrigerator

Product Information

Specifications

Model: CK72ADA/CK54ADA Kitchenette
Dishwasher Model: Summit DW18SS4ADA
Dishwasher Size: 18 inches wide
Designed for use under ADA-compliant counters

Product Usage Instructions

Opening the Cabinet
Open the door of the 18-inch wide cabinet of your kitchenette. For the CK72ADASINKL model, the cabinet is located to the right of the sink. For the CK72ADASINKR model, the cabinet is located to the left of the sink. Note that the CK54 model will include TWO doors.

Removing Door Screws
Remove the two screws on the hinge side of the door. For the CK54 model, remove the screws of the hinges on each door.

Removing Front Support Bar
Locate the front support bar at the bottom front of the cabinet. Remove the screws on the left and right side of the bar that attach it to the sides of the cabinet.

Removing Middle Shelf
Unscrew the two screws underneath the front lip of the middle shelf, and the two screws in the back of the shelf holding it to the walls of the cabinet. Remove the middle shelf.

Removing Bottom Shelf
Remove the four screws attaching the bottom shelf to the cabinet and slide the bottom shelf out of the unit. Note: Leave the back, mid-height support bar in place as it provides structure to the unit once the shelves are removed.

Drilling a Hole for Hoses
Drill a hole with a diameter of approximately 2 inches in the sink-side wall of the cabinet to accommodate the water intake and drain hoses. It is recommended to line the inside of the drilled hole with a rubber grommet to prevent the metal from cutting into the drain hose.

Installing the Dishwasher
Feed the intake and drain hoses through the drilled hole. Push the dishwasher back into the combo kitchen, ensuring that the hoses are tucked into the channel at the bottom rear of the dishwasher. There should be sufficient room for both hoses when the dishwasher is pushed back to be flush with the front of the combo kitchen.

FAQ

Q: What dishwasher model is recommended for use with this kitchenette?
A: We recommend using the Summit DW18SS4ADA dishwasher, which is designed to fit under ADA-compliant counters and is 18 inches wide.

Q: Do I need to remove any shelves or support bars during installation?
A: Yes, you will need to remove the middle shelf and bottom shelf from the cabinet. However, you should leave the back, mid-height support bar in place as it provides structure to the unit once the shelves are removed.

Q: How do I accommodate the water intake and drain hoses?
A: You will need to drill a hole with a diameter of approximately 2 inches in the sink-side wall of the cabinet. It is recommended to line the inside of the drilled hole with a rubber grommet to protect the drain hose from being cut by the metal.

Q: How should I position the dishwasher in the combo kitchen?
A: Push the dishwasher back into the combo kitchen, ensuring that the intake and drain hoses are tucked into the channel at the bottom rear of the dishwasher. The dishwasher should be pushed back to be flush with the front of the combo kitchen.

INSTALLATION INSTRUCTION

This kitchenette can be modified to accept an 18” wide dishwasher sized for use under ADA-compliant counters. We recommend the Summit DW18SS4ADA.

Open the door of the 18” wide cabinet of your kitchenette (located to the right of the sink in the CK72ADASINKL, and to the left of the sink in the CK72ADASINKR).
- NOTE: The CK54 model will include TWO doors.
Remove the two screws (one at the top and one at the bottom) on the hinge side of the door.
- For the CK54 model, remove the screws of the hinges on each door.
Locate the front support bar at the bottom front of the cabinet. Remove the screws on the left and the right side of the bar, which attach it to the sides of the cabinet.
Remove the middle shelf by unscrewing the two screws underneath the front lip of the shelf, and the two screws in the back of the shelf, holding it to the walls of the cabinet.
Remove the four screws attaching the bottom shelf to the cabinet, and slide the bottom shelf out of the unit.
NOTE: Leave the back, mid-height support bar in place. It will provide structure to the unit once the shelves are removed.
A hole will need to be drilled in the sink-side wall of the cabinet to accommodate the water intake and drain hoses. The hole should be approximately 2” in diameter. It is recommended to line the inside of the drilled hole with a rubber grommet to prevent the metal from cutting into the drain hose.
Feed the intake and drain hoses through the hole. As you push the dishwasher back into the combo kitchen, make sure to tuck the hoses into the channel at the bottom rear of the dishwasher. There should be sufficient room for both hoses when the dishwasher is pushed back to be flush with the front of the combo kitchen.