Shenzhen Mifang Network Technology H081 ANC Wireless Headphones User Manual

Shenzhen Mifang Network Technology H081 ANC Wireless Headphones

Thank you for purchasing our product. This manual addresses the safety guidelines, warranty and operating instructions. Please review this manual thoroughly before operating your device.

Package Contents

1. Bluetooth headphones x 1
2. Micro USB cable x 1
3. Carry bag x 1
4. User manuals 1

At a Glance

LED INDICATOR GUIDE

Using the Headphones

Charge the headphones

1.  Plug the smal end of the USB cable into the Micro USB port on the left earcup.
2.  Plug the other end into a USB wall charger or computer (DC 5V) that is powered on.

Note:
Fully charge the headphones before using them for the first time.

Power on/ off

• Power on: Press and hold the MFB button for 2 seconds.
• Power off: Press and hold the MFB button for 2 seconds when the headphones are on.

Pair

1. Turn on the Bluetooth of your phone or other Bluetooth devices.
2.  Turn on the headphones, and the headphones enter pairing mode (indicator flashes red and blue alternately).
3.  In the list of found Bluetooth devices in your phone or other Bluetooth devices, choose “H081” to pair.
4.  Enter “0000” or “1234” if your phone or Bluetooth device asks you to enter a code to pair.

Notes:

• When the headphones are on but are not paired with your phone or other Bluetooth devices, they wil be automatically off after about 5 minutes (to have them enter pairing mode again, turn on the headphones).
• The headphones will directly enter pairing mode the first time you turn them on, and they will connect to the last paired Bluetooth device automatically when turned on.

HEADPHONE FUNCTIONS

CELL FUNCTION

ANC function
Slide the ANC switch down/ up to activate /deactivate the noise cancellation function. Its indicator will turn on / off accordingly.
Note:
When the ANC mode is on, the LED indicator will stay green.

Reset the headphones/ Clear all pairing information on the headphones
Press and hold the “»” and “-” button at the same time for 5 seconds when the headphones are connected to your phone or enter pairing mode (you will hear a “dudu” sound with the LED indicator flashes red and blue once).

Care and Maintenance

Store your headphones
The earcups fold for easy, convenient storage. Place the headphones into the bag. Fold both earcups up toward the headband.

Notes:

• Make sure to turn off the headphones and the ANC mode is off when not in use.
• Before storing the headphones for more than a few months, make sure the battery is fully charged.

Clean the headphones

• Your headphones may require periodic cleaning.
• Wipe the outside surfaces with a soft, dry cloth.
• Don’t allow moisture to get inside the earcups or the audio input port.

FAQs

Q:I paired the headphones with my phone before,but I failed to pair them to my phone again.
A:Turn on the Bluetooth of your phone and in “MY DEVICES” choose “H081” and tap “O” “Forget This Device”. Turn off the headphones. Reset the headphones. Pair the headphones with your phone again following the
instructions in the previous part “Pair”.

Q: paired the headphones with my phone, but there is no sound from the headphone s.
A: Power on the headphones and charge the battery. Make sure the headphones/phone are/ is not muted. Some phones ask for the setup of the wireless headphones as an audio output device before the sound is transmitted. Please refer to the instructions of your phone for details. Move your phone closer to the headphones (within 33 feet) and away from any interference or obstructions. Use a different music source. If you use a music player or other devices, please make sure it supports the A2DP stereo music profile.

Q: Sound is not stable and consistent.
A: Make sure your headphones stay close to your phone (not away from your phone more than 33 feet, no obstacles between, and no radio or Wi-Fi interference nearby).

Q: Battery life is shorter than expected.
A: The ANC function has a separate switch and will consume power when the function is turned on and the headphones are off. Please turn off the ANC function when you turn off the headphones.

Q: My headphones will not switch on.
A: Please recharge the headphones and make sure they have enough battery power. If they are fully charged and still nothing happens or if you are not able to charge the unit, please contact our customer suppot for further information.

Specifications

• Bluetooth Standard: V5.0
• Wireless Profile: A2DP, HFP, HSP, AVRCP
• Operating Range: 33 feet/ 10 meters (No obstacles between)
• Charging Time: 2-3 hours
• Talk/ Play Time:
• About 35 hours with ANC off (Varies according to volume level and audio content)
• About 25 hours with ANC on (Varies according to volume level and audio content)
• Charging Voltage: DC 5v
• Charging Current: 500mA
• Battery Capacity: 600mAh/3.7V
• Working Temperature: -10C to 40 C

Attention

• Use original or certified cables.
• Don’t expose to liquids.
• Don’t disassemble.
• Avoid dropping.
• Avoid extreme temperatures.

SAFETY AND WARRANTY

Important Safety Instructions

• Use of headphones will impair your ability to hear other sounds.
• Use caution while using your headphones when you are engaging in any activity that requires your full attention. .If you have a pacemaker or other electrical medical devices, you should consult your physician before using this product. .This package contains small parts that may be hazardous to children and should be kept out of reach from children. This product is not a toy – never allow children to play with this product.
• Always store the product out of reach from children. The bags themselves or the many small parts they contain may cause choking if ingested.
• Never try to dismantle the product yourself, or push objects of any kind into the products, as this may cause short circuits which could result in a fire or electric shock. None of the components can be replaced or repaired by users. Only authorized dealers or service centers may open the product. If any parts of your product require replacement for any reason, including normal wear and tear or breakage, please contact us.
• Avoid exposing your product to heat and humidity to protect against damage to the product or injury to you. Keep all products, cords, and cables away from operating machinery.
• If the product overheats, if the product has been dropped or damaged, if the product has a damaged cord or plug, or if the product has been dropped in a liquid, discontinue use and contact us.
• Do NOT use in areas where there are explosive hazards.
• Do NOT submerge the headphones in water. Do NOT expose the headphones to moving water (e.g., from a faucet, etc.).
• Do NOT wear the headphones while showering or bathing, or when participating in water sports, e.g. swimming, waterskiing, surfing, etc.
• This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
• Leaving the product in hot or cold places, such as in a closed car in the summer and winter conditions, will reduce the capacity and lifetime of the headphones.
• Dispose of the product according to local standards and regulations.
• Remember: Always drive safely, avoid distractions and follow local laws!
• Using the headphones while operating a motor vehicle, motorcycle, watercraft or bicycle may be dangerous, and is illegal in some jurisdictions, just as use of the headphones with both ears covered while driving is not permitted in certain jurisdictions. Check your local laws. Use caution while using your headphones when you are engaging in any activity that requires your full attention. While engaging in any such activity, removing the headphones from your ear or turning off your headphones will keep you from being distracted, so as to avoid accident or injury. Do not take notes or read documents while driving.

Federal Communications Commission (FCC) Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:  This device may not cause harmful interference, and  this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital  device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined  y turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  Warning: Changes or modifications made to this device not expressly approved by may void the FCC authorization to operate this device Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment

RF exposure statement:
The transmitter must not be colocated or operated in conjunction with any other antenna or transmitter. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 5mm between the radiator and any part of your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>