GADNIC PINTUR01 Paint Runner Pro Owner’s Manual

GADNIC PINTUR01 Paint Runner Pro

Product Information

Specifications

• Product Name: Paint Runner Pro
• Model: PINTUR01
• Components: Easy Pour Jug, Flocked Edger, Resting Tray, Corner Pad, Paint Runner Roller

Product Usage Instructions

Preparing Your Paint Runner for Use

1. Before first use, rinse the roller under a tap and then dry it.
2. Remove the Open Cap from the Paint Runner.
3. Pour up to 900 ml of paint into the Paint Runner using the Easy Pour Jug (refer to Fig.1).
4. Replace the Open Cap and ensure it is securely in place (it should click into place).
5. To ‘charge’ the Paint Runner, roll it on old newspaper for 2-3 minutes until paint is visible all over the roller (refer to Fig.2).

Using the Paint Runner

1. Handle the Open Cap with care and refill paint into the container until ready to use the Paint Runner.
2. For ceilings and high walls, extend your reach with a threaded pole or a broomstick if a threaded pole is unavailable.
3. Always maintain a firm footing with both hands on the Paint Runner.
4. Ensure the weight of the roller is directly under your control (refer to Fig.3).
5. Apply paint without exerting too much pressure.

During Breaks
Remember to clean the Paint Runner and change the roller head during breaks using the provided instructions.

Cleaning the Flocked Edger

1. Rotate counterclockwise to open it.
2. Dispose of significant amounts of paint responsibly.
3. Dry the Flocked Edger for later use.

FAQ

• How do I clean the Paint Runner after use?
  Follow the provided instructions to clean the Paint Runner by rinsing it under a tap and drying it thoroughly.

• Can I use any type of paint with the Paint Runner?
  It is recommended to use water-based paint for optimal results. Always follow the manufacturer’s instructions for desired consistency.

For best results, please read this owner’ s manual thoroughly before using your Paint Runner and accessories.

1. Only use acrylic or latex paints (no enamel or oil-based paints).
2. Always stir paint thoroughly before use.
3. lf paint is too thick, mix in a little water as per manufacturer’s instructions to achieve desired consistency.
4. For a quality finish,always apply two coats.
5. Only apply the second coat when the first coat is completely dry.
6. As with all DLY/Decorating activities, always make sure that you take the appropriate safety precautions.
7. lf Edger Head is loose,it has not been pushed on to the handle firmly enough. Do not be afraid to use a little force to secure the Edger Head.

Preparing your Paint Runner for use

1. Before first use rinse the rollar under a tap then dry.
2. Remore the Open Cap form the Paint Runner.
3. Pour up to 900 mi of paint into the Paint Runner using the Easy Pour Jug (Fig.1 ).
4. Replace the Open Cap and make sure it is thoroughly secure (lt should click into place).
5. You now need to ‘charge’ the Paint Runner. Do this by rolling it on old newspaper for 2-3 minutes, until paint is visible all over the roller (Fig.2).

YOUR PAINT RUNNER IS NOW READY TO USE

Using the Paint Runner

1. Make sure you are happy with the weight of the Paint Runner.lf not,carefully remove the Open Cap and pour paint back into the can until you can use Paint Runner comfortably
2. For ceilings and high walls you can extend your reach with a threaded pole or you can use a broom handle if you don’t have a threaded pole.
3. When working at height, always ensure you have a firm footing and both hands on the pole.
4. When using the pole, always ensure you are positioned directly under the weight of the roller(Fig.3).
5. When applying paint do not press too hard Let the Paint Runner do the work for you.

During lntervals
lf taking a short break. place on resting tray. lf your break is likely to be longer than 2 hours, wrap tightly in plastic wrap and store in a cool, dark place (preferably the refrigerator) on top of a piece of cardboard or old newspaper to prevent drying out.

Washing the Paint runner & changing the head.

• Remare the open Cap form your Paint Runner and flush with warm running water, until clean. Dry out for immediate use by rolling the Paint Runner on paper or cloth or air-dry for later use.
• To change the head on the Paint Runner, remora the Open Cap, then the Safety Cap and pries the handle apart to release the head. Replace with the new head and then the Safety Cap and finally the Open Cap (Fig. 4).

Pole Adapter

1. Taper Pole without thread to be firmly inserted into handle (Fig.5 ).
2. Threaded Pole to be used with pole adapter (Fig.6). ( Note: Pole thread to be of same size as Pole Adapter)

Preparing your flocked Edger

1. Before first use rinse the roller under a tap then dry.
2. lift the Open Cap handle and twine anti-clockwise to open.
3. Pour the paint into the Edger Head using the Easy Pour Jug (Fig .7).
4. Replace the Open Cap,twist clockwise to lock and put the Open Cap handle down.
5. Clean the excessive paint on the Edger Head,if any
6. Charge the Edger Head by rolling it on an old newspaper for 2 minutes or until the fully covered with paint(Fig.8).
7. The Edger Head is now ready for use.
8. When painting,ensure that the Edger head is tilted at an angle form the adjacent wall.The sponge portion should be seated fully on the painted wall(Fig.9).

Cleaning the Flocked Edger

1. Lift the Open Cap handle and twist anti-clockwise to open.
2. Dispose of significant amounts of paint responsibly.
3. Remora the Open Cap and Preventer Plate form your Edger Head and flush with water,until clean (Fig.10).Dry out for immediate use by rolling the Flocked Edger on old newspaper or cloth or air-dry for later use.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>