JIASHENG B0C9TGSKFL Professional Nail Drill Machine User Manual
- June 15, 2024
- JIASHENG
Table of Contents
JIASHENG B0C9TGSKFL Professional Nail Drill Machine
Product Information
Specifications
- Product Name: XYZ Product
- Model Number: ABC123
- Dimensions: 10 inches (L) x 5 inches (W) x 3 inches (H)
- Weight: 1 pound
- Power Source: Built-in rechargeable battery
- Battery Life: Up to 8 hours
- Connectivity: Bluetooth 5.0
- Supported Formats: MP3, WAV, AAC
Product Usage Instructions
Charging the Battery
To charge the built-in rechargeable battery, follow these steps:
- Connect the included USB cable to the charging port on the product.
- Connect the other end of the USB cable to a power source, such as a computer or wall adapter.
- The battery indicator light will turn on to indicate that the charging process has started.
- Wait until the battery indicator light turns off, indicating that the battery is fully charged.
Powering On/Off
To power on/off the product, follow these steps:
- Press and hold the power button located on the side of theproduct for a few seconds.
- The product will turn on/off and a startup/shutdown sound will be heard.
Pairing with a Bluetooth Device
To pair the product with a Bluetooth device, follow these steps:
- Make sure the product is powered on.
- Enable Bluetooth on the device you want to pair with.
- On the device, search for available Bluetooth devices.
- Select “XYZ Product” from the list of available devices.
- If prompted, enter the pairing code “1234” and press “OK” or “Pair”.
- The product and the device will now be paired and connected via Bluetooth.
Playing Music
To play music on the product, follow these steps:
- Make sure the product is powered on and paired with a Bluetooth device.
- Open your preferred music app on the connected device.
- Select a song or playlist to play.
- The music will now be played through the product’s speakers.
FAQ
Q: How long does the battery last?
A: The battery life of the product is up to 8 hours on a full charge.
Q: Can I use the product while it’s charging?
A: Yes, you can use the product while it’s charging. However, please note that it may take longer to fully charge the battery if it is being used simultaneously.
Q: Can I connect the product to a non-Bluetooth device?
A: No, the product can only be connected to devices that support Bluetooth connectivity.
Composition
Composition: 30,000RPM
Control Unit
Operation
- The aviation plug connects with this main machine
- Turn on the power
- Choose “Forward” or “Reverse” switch according to your need
- Adjust your speed and check your speed
Main Board
- Connect the main board and the hand-piece.Then turn on the power.
- Turn on the switch(Switch On) and choose the rotation direction(FWD Switch/REV Switch).
- According to your need, rotate the speed control, choose the speed you wanted.
The Instruction for 6 pcs Nail Drill Bits
| PRODUCT NAME | Electric Nail Dr ill |
|---|
INPUT VOLTAGE
| I00-240V
/60Hz
| OUTPUT VOLTAGE
/CURRENT
| 12.0V==
1200MA
POWERMAX
|
14.4W
|
POWER
| 12W-14.4W
RATED SPEED| 20,000rpm/ 30,000rpm| DRILL BITS SIZE| 3/32″ size
Product Features
- The speed can be adjusted according to your needs
- Forward /Reverse directions, pause 2 seconds to protect the motor. It is suitable for left-hand and right- hand.
- Low heat, low noise, low vibration, and portable compact You can easily use the nail drill and change the nail drill bit
- 6 kinds of metal bits.
Warming Tips
- Please slowly adjust it from low speed to a higher speed that you like.
- Do not adjust it to the highest speed aU at once to prevent the improper operation from hurting your nails.
- A high-speed motor wiU inevitably generate heat, so please do not use the nail drill for too long each time. When you feel that the nail drill is overheated, please stop using it immediately and waiit for the heat to dissipate before using it again.
- Please don’t change the FWD/REV direction frequently in order to avoid the handpiece damaged.
- Please h1rn off the main machine before changing the nail drill bits in order to extend the service of life.
- Please don’t disassemble the machine and the hand piece, or shorten its lifespan.
- This nail drill machine is designed with overloaded protection function, it is possible to cut off the power automatically when it is overloaded to work or work for long time, so please don’t worry about this, there are two ways to restore and rework as below:
- Way 1: Unplug the plug, wait for 2 minutes, restart machine to work
- Way 2: Turn off the power switch, wait for 10 minutes, restart machine to work
DAILY MAINTENANCE ADVICE
-
A. Cleaning and hygiene: After each use, inspect the nail drill handpiece and clean the polishing drill bits. Use a brush to remove dust and residual nail powder from the surface. Avoid using corrosive or solvent-based liquids during the cleaning process.
-
B. Pre-use troubleshooting: Before use, check all components of the machine to ensure they are securely fastened and free from any loose parts. Inspect the power cord and plug for any damages. Additionally, check the polishing drill bit and sanding bands for wear and replace them
if necessary. -
C. Polishing drill bits and drill handpiece maintenance: Ensure proper installation and tight fastening of the polishing head before use. If significant wear or damage is observed, timely replacement is needed maintain optimal nail polishing results. Check for any impurities on the front end of the polishing pen that may affect its performance. Lastly, we strongly recommend users to carefully read the user manual and follow the manufacturer’s guidelines before operating the nail polishing pen. Adhering to proper maintenance procedures will help maintain stability, reliability, and extend the machine’s lifespan.
FAQ
- Q: What should I do if it stops working suddenly?
- A: Yes, you can contact Alles Customer Service Team through “Your Orders” tab in your Amazon account on Amazon homepage. Or you can contact Amazon Customer Service to ask how to contact seller for seller warranty. We offer 1 Year Warranty. May it help to you.
- Q: How to install the drill bits? The bits are too big.
- A: Dear Customer, Our handpiece is twist lock chuck system, You have to twist to open it then insert the bit and twist to lock the bit tightly. You can check the second picture on listing as reference. The bits are 3/32 inch size. Hope this information can solve your problem.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>