GAME OF BRICKS 75383 Darth Mauls Sith Infiltrator Instruction Manual
- September 7, 2024
- Game Of Bricks
Table of Contents
GAME OF BRICKS 75383 Darth Mauls Sith Infiltrator
Product Information
Specifications:
- Product Name: Light Kit for Darth Maul’s Sith Infiltrator 75383
- Material: Aviation-grade wire
- Wire Type: Severely thin wire with high tension and pressure tolerance
- Maximum Voltage: 6V
Product Usage Instructions
Safety Precautions:
When handling the light kit, be cautious not to cut through the thin wire
as it may shear easily during installation. Avoid pressing brick pieces down
on the wire to prevent damage.
Installation Steps:
- Open Bag 1 and follow the step-by-step instructions provided in the manual for assembling the light kit components.
- Proceed to Bag 2 and continue with the assembly process as guided in the manual.
- Complete the assembly by following the instructions in Bag 3, ensuring all components are properly connected.
- If using the Classic Version, connect the light kit to the battery box to finalize the installation.
Power Source:
For powering the light kit, connect it to the battery box provided. If
using an alternative power source, ensure that the maximum voltage does not
exceed 6V to prevent damage to the components.
Support and Maintenance:
If you encounter any challenges during installation, contact support@gameofbricks.eu for assistance. The product comes with 2 years of free light kit maintenance.
Frequently Asked Questions (FAQ):
-
Q: What should I do if I accidentally cut through the wire?
A: If the wire is accidentally cut, contact customer support for guidance on potential solutions or replacements. -
Q: Can I use a power source with a voltage higher than 6V?
A: It is recommended to use a power source with a maximum voltage of 6V to avoid damaging the light kit components.
Thank You
For Purchasing this product. To give you the perfect hidden-line effect, we
use severely thin aviation-grade wire with high tension and pressure
tolerance. However, due to its thin nature, be careful not to cut through it
as it might be susceptible to shearing during installation. Always be careful
not to press brick pieces down on the wire.
Let’s Get Started
if you face any challenges, please feel free to reach out via
support@gameofbricks.eu Please note that we
offer 2 years of free light kit maintenance
INSTALLATION
Step 1 (Bag 1)
Step 2 (Bag 2)
Step 3 (Bag 3)
Step 4 – Classic Version
The following pictures are only for Classic Version.
Connect the light kit to the battery box and installation will be complete. If you would like to use another power source, please make sure the maximum voltage is 6V.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>