Shantou Chenghai Jiasheng Model Toys Factory 666888 Four Axis Aircraft Instruction Manual

June 4, 2024
Shantou Chenghai Jiasheng Model Toys Factory

Shantou Chenghai Jiasheng Model Toys Factory 666888 Four Axis Aircraft

PARTS DESCRIPTION[

Shantou Chenghai Jiasheng Model Toys Factory 666888
Four Axis Aircraft FIG 1](https://manuals.plus/wp-content/uploads/2022/08/Shantou-Chenghai- Jiasheng-Model-Toys-Factory-666888-Four-Axis-Aircraft-FIG-1.png)

PARTS DESCRIPTION OF THE REMOTE CONTROLLER Low power indication: When the energy is lower than 3V, there is warming the tone of Di, Di”, it means user needs to change the new batteries.
Nate: remote control design also ln and approval, please according to the pylon design kya conmoeponding to manual operation.

REMOTE CONTROLLER’ S BATTERIES INSTALL[](https://manuals.plus/wp-

content/uploads/2022/08/Shantou-Chenghai-Jiasheng-Model-Toys-Factory-666888 -Four-Axis-Aircraft-FIG-3.png)

Battery lnatalallon method: Open the battery COYBr on Iha back of the rwnola control, IIODDl’ding 1D th■ p011it: MI and n99atiw .,lltnldlono In the boU.ry box, oorn>elly ln1ort 3×1 iN “M” -(Ballarat ..ad to ba purchased Moapa-ly)

CHARGE BATTERIES OF QUADCOPTER

Push the switch of OFF -ition then open tho battery COYBr, After disconnecting, connect port A to the computer’$ USB Interface, the red light will be on, and the port B will be connected to Ille lithium battery. The red light will be on. The light la off when full. Charging time is around 180 minutes.

Attention

  1. Please stop charging when the plug is overheated due to overcharge, or it may cause damage to the batteries.
  2. Please supervise the charging process when charging.
  3. Please make sure you use the original USD cable provided which is reliable balance charging mode to avoid an accident.
  4. Please do not charge the batteries if the surface temperature is sitll not cool after flylng. It is better to wait around 30 minutes until the temperature back to be normal.
  5. Please do not throw the batteries into the file to cause accidents.
  6. Please do not short the circuit the batteries, do not mix the batteries with some small metal parts, otherwise, it will cause accidents easily.
  7. It needs to use the factory charging lins when charging. And the charging line cen only be charged on the computer, If the adapter Is needed, please purchase t additionally. It ls forbidden to select other adapter yoursof. The charging Bhall be supervised by 8omaone, otherwise, In case of any accident, the manufacturer shall not take any responsibility.

PREPARATORY FLIGHT ENVIRONMENT

  1. Flight EnvironmentShantou Chenghai Jiasheng Model Toys Factory 666888 Four Axis Aircraft FIG 5
  2. Indoor spacious space away from obstacles, people or pets Is preferred.
  3. Outdoor: sunny, windy, and sunny days are preferred.
  4. Please keep the aircraft In lIne of slight during the flight and keep away from obstacles, high-voltage cables, trees and personnel.
  5. Do not fly in extreme environments, such as hot, cold, strong wind or rainstorms.

PREPARE TO FLY

Make sure the propeller is installed corectly securely and the aircraft ams are straiaht

  1. 1.1um on the power of the aircraft fuselage.Pace the aircrafit on a lever surface.
    2. Open the remote control hande than um on the
    3. Push the left lever up and down o the bottom. and the power of the remote control and hear the “DI” sound Is indicator light is always on. SUCCessful. Tka aff Mathad

Take-off Method 1:

  1. AS showm in the fig.operatlng one night and len conuol lovør to start the celebration.
  2. As shown In the fig.operating the right and left control lever to unlock the aircraft.
  3. Push the throttle lever up slowly, and the aircraft will take off.Shantou Chenghai Jiasheng Model Toys Factory 666888 Four Axis Aircraft FIG 10

Take-off Method 2:

  1. As shown In the fig.operating the ight and left control g cover to start calibration.
  2. Short press one key take-off among burion, the aircraft we take off.

OPERATING DIRECTION[

Shantou Chenghai Jiasheng Model Toys Factory 666888
Four Axis Aircraft FIG 13](https://manuals.plus/wp-content/uploads/2022/08/Shantou-Chenghai- Jiasheng-Model-Toys-Factory-666888-Four-Axis-Aircraft-FIG-13.png)

SPECIAL NOTICE

  • Without any operation of the control lever, the quadcopter keeps rotating in the sky, you can correct It by pressing the button of fine-tuning

When the aircraft from the ground is around 30cm, the flight wll be affected by the alter aftitsetf as the blades rotate. we cal this as GrOund Reaction”, the effective will be more strang when the al reraft get more close to the ground.

[

Shantou Chenghai Jiasheng Model Toys Factory 666888 Four Axis Aircraft
FIG 14](https://manuals.plus/wp-content/uploads/2022/08/Shantou-Chenghai- Jiasheng-Model-Toys-Factory-666888-Four-Axis-Aircraft-FIG-14.png)FLYING EXERCISES

Try some entries efter familiar with some basic learning.Shantou Chenghai
Jiasheng Model Toys Factory 666888 Four Axis Aircraft FIG
15

HEADLESS FUNCTION

  1. watch to headless function: After frequency modulation of the aircraft with the remote controller, long press down headless functlon swtch on the top left of the controller, remote controller wll give out “DI and the indicator light is fashing from lang bright state, it means that it enter into the headless state.

  2. Exit headless function After enter into the headless state, long press down the headless function switch and hear “Di”, and the Indicator light ls Into long bright stste from flashing, It means that It exits the headless state.

  3. Carrying forward direction:
    After aircraft crashes into a headless state, it needs to adjust the aircraft’s direction, which means when the aircraft start frequency modulation, the direction of the indicator light on the aircraft means the correct direction that the aircraft moves on.

  4. One key return:
    Under the headless state, press” one key return” , the aircraft will Ay to the player, when you press agaln, It will exit to the normal playlng.

PROBLEMS AND SOLUTIONS

problems causes solutions

Power off of the remote tontrollar

| 1 The switch is on the

position of “OFF”

|

1 Move to th• position of “ON”

2 btttties il”I wl”Ong polatity

| : = :i ,b•, 1e r;:ect the
3 PowM off| 3 Chacking ■nd change the

new b1tteries

Remote controller has o responsa

|

1 No turning on tht tnergy

|

1 Move to tht position of “ON”

2 No connitcting the

aircraft’s batteries

| 2: Check.Ing and corritet connt1ct

the power on

3 Strong wind

|

3 Please play indOOl’S whete i$

sp,cfOU$.

Aircraft can r’IOt be up

|

1 Rator spHd istoo low

|

1 Push up tha 11Ct11leri1tor

2 The aircrlft’ s power is

notenough

| 2 Pleue make the airer.di’ s

bAtteries fully charged

Out of control

| Accelerator operated no return the aircraft upward| whitn you doth• frequency moduletlH,

th ■”91111r■tt;1r op•rated ,hould be b.ck

to theoriginal pcuition

Out of the control distance

|

PleHe play wrthln the e-ffectlve distance

Exceuive

landing

| Tha spe•d of accelerator pulling i1 too fut.| Ple■sa pull th• control lever 11Dwly, maint•in • 1mooth 1,nding.

ATTENTION

  1. The control distance will be effacted by the low battery.
  2. It is hard to fly or height Is not enough when the batteries energy is low.
  3. If there is any damages occured, plese stop playing and take it to be repaired to avoid accidents.
  4. Please remove the batteries from the remote controller if long time not used to protect from batteries leakage
  5. To avoid the quadcopter from high falling or collision each other.
  6. If there is any problem occured during using, please replace our factory’s original parts, or it may cause the damages easily.

PARTS SHOW

Documents / Resources

| Shantou Chenghai Jiasheng Model Toys Factory 666888 Four Axis Aircraft [pdf] Instruction Manual
666888, 2A7OQ-666888, 2A7OQ666888, 666888 Four Axis Aircraft, Four Axis Aircraft
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals