ZERO ZERO ROBOTICS V202107 Falcon Drone User Guide

ZERO ZERO ROBOTICS V202107 Falcon Drone

Product Information

The ZeroZero.tech ZV101 is a drone equipped with a Forward Vision System, Gimbal and Camera, Bottom Optical Sensor, Bottom Infrared Sensor, and Intelligent Battery. It also has an Arm Indicator Light, Power Button, Status Indicator Light, Motor, Propeller, Battery Level Indicator Light, Battery Power Button, Heat Vents, Antenna, Shutter Button, Gimbal Wheel, Return to Home Button, Leisure/Sport Toggle Button/Link Button, Micro SD Card Slot, Emergency Stop Button, Detachable Control Stick, Clamp for Small Phones, Camera Settings Adjustment Dial, Record Button, Power Button, Custom Button, Control Sticks Storage Slot, USB-C Port and Video Transmission Port.

Product Usage Instructions

Step 1 – Download V-Coptr App
Download the V-Coptr App from the App Store or Google Play Store. Scan the QR code provided in the manual to download the app. Make sure your mobile phone is compatible with iOS 10.0 (or above) or Android 6.0 (or above).

Step 2 – Charging
Charge the Intelligent Battery by pushing back the battery buckles to remove the battery. During charging, the indicator lights of current battery level flash regularly. Plug the charging cable into the USB-C Port. It takes about 2.5 hours to fully charge. Press the power button of Intelligent Battery/BlastOff Controller briefly to check the battery level indicator light which will show the current battery level.

Step 3 – Prepare the BlastOff Controller
Unfold the Mobile Phone Stand and Antennas. Charge to activate the battery. Install the Control Sticks and place your mobile phone on the Mobile Phone Stand. Press and hold the power button for 2 seconds. The BlastOff Controller will beep when it is successfully turned on.

Step 4 – Prepare the Drone
Insert the intelligent battery into the slot and push forward the battery buckles. Use the clamps to secure smaller phones. Use cable of your mobile phone (not included in the package) to connect the BlastOff Controller and your mobile phone. Make sure the red labels under the battery buckles are not visible to ensure the battery is securely installed. Remove the gimbal protector and pull out the propellers from the battery buckles. Press and hold the arm buttons until the arms are completely unfolded. Press the link button on the drone. The status indicator light of the drone will flash green and begin the linking process. After releasing the arm buttons, the buttons are fully popped up, indicating that the arms are fully unfolded. Press and hold the power button for 5 seconds until the status indicator light blinks. Once it’s finished booting up, you will hear a sound.

zerozero.tech

For more information, please download the User Manual from the official website.
This guide is subject to change without prior notice. Please visit the official website for more detailed information.

• According to changes in market demand or production plan, Hangzhou Zero Zero Technology Co., Ltd. may change the product specifications and appearance. Please contact us if you have any questions.

Installation Instruction

Step 1 Download V-Coptr App

• Use mobile phone to scan the QR code below or download the V-Coptr App from the App Store / Google Play Store
• The V-Coptr App is compatible with iOS 10.0 (or above) or Android 6.0 (or above).

Step 2 Charging
Charge the Intelligent Battery

1. Push back the battery buckles to remove the battery.
2. During charging, the indicator lights of current battery level flash regularly.

Charge the BlastOff Controller

Plug the charging cable into the USB-C Port.
It takes about 2.5 hours to fully charge.

Check the battery level
Press the power button of Intelligent Battery / BlastOff Controller briefly, and the battery level indicator light
will show the current battery level.

Step 3 Prepare the BlastOff Controller

• Unfold the Mobile Phone Stand and the Antennas
  

• Install the Control Sticks
  

• Place your mobile phone on the Mobile Phone Stand
  

• Use the cable of your mobile phone (not included in the package) to connect the BlastOff Controller and your mobile phone
  

• Press and hold the power button for 2 seconds. The BlastOff Controller will beep when it is successfully turned on

Step 4 Prepare the Drone

• Insert the intelligent battery into the slot and push forward the battery buckles
  

• Remove the gimbal protector and pull out the propellers from the battery buckles
  

• Press and hold the arm buttons until the arms are completely unfolded
  

• Press and hold the power button for 5 seconds until the status indicator light blinks. Once it’s finished booting up, you will hear a sound* Note : There is no need to manually rotate the motors. The motor angle will automatically be in place before takeoff.

Step 5 Connect the Drone

• Open the V-Coptr App

• Press the link button on the drone. The status indicator light of the drone will flash green and begin the linking process
  

• Start Connecting
  Method One: Connect BlastOff Controller and the drone via App
  Method Two: Connect the BlastOff Controller and the drone with the combination keys

  • Press and hold the two custom buttons + record button for two seconds, the status indicator light of the BlastOff Controller will flash green as it starts to connect to the drone.
  • The connection is successful when the status indicator light of the BlastOff Controller is solid green.
    * During the connection process, please keep the BlastOff Controller and the drone within 1 meter of each other.

Step 6 Calibrate the Sensors

• Before taking off the drone, it is recommended to calibrate the IMU and compass in the “General Settings” in the App’s camera view page

Step 7 Flight
Take off

1. Auto takeoff in the App.
   

2. Manual takeoff with the BlastOff Controller.
   

Landing

1. Auto landing in the App.
   

2. Manual landing with the BlastOff Controller.
   

BlastOff Controller Operations

1. The default control mode is shown below. You can  choose other control modes in the App.
   

2. You can use the “gimbal wheel” to control the tilt angle of the camera.
   

3. You can use the “camera settings adjustment dial” to control the ISO/Shutter/EV value (short press the button to switch the control value).

4. Short press the “shutter button” to take a photo; short press the “record button” to start/stop video recording.

5. Leisure/Sport Toggle Button

   • Switch to “Leisure”(L): you can use the manual, and intelligent modes in the App, and the obstacle avoidance feature is available.
   • Switch to “Sport”(S): the flight speed will be greatly increased. Only the manual mode in the App can be used, and the obstacle avoidance feature is unavailable.

6. You can set the features of the custom buttons in the App.

Return to Home
You can short press the “return to home button” in the App/of the BlastOff Controller to bring the drone back to the home point.

Emergency Stop
You can short press the “emergency stop button” in the App/of the BlastOff Controller to break and hover the drone in emergency situations.

Install and Remove the Landing gear

Install the Landing Gear
( Attention: Remove the intelligent battery from the drone first. )

1. Wrap the landing gear over the both sides of the battery footpads

2. Push in and snap tight

Remove the Landing Gear
( Attention: Remove the intelligent battery from the drone first. )

1. Hold one side of the landing gear and push in the direction shown to remove it from the battery footpad
2. Remove the landing gear on the opposite side in the same way

Flight Safety

Attention:

• Do not release or retrieve the drone with your hands.

• Please make sure the bottom infrared sensor is clean before taking off.

• Replace aging, broken or deformed propellers.

• We recommend installing the landing gear and taking off on flat ground.

Improper Flying Environments:

• Near crowds or dense buildings

• Near strong magnetic fields

• No-fly zones

• In rain, fog, snow, lightning, hail, storms, strong wind, or any other extreme weather environments.

Please check the Disclaimer and Safety Instructions for more details at zerozero.tech/support/downloads.
Please read it carefully before flying.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>