FRIGIDAIRE FG7T Gas Furnace Owner’s Manual

TECHNICAL SPECIFICATIONS

Two Stage, Variable Speed, High Efficiency Upflow/Horizontal and Downflow Gas Furnaces
Induced Draft 80 + AFUE Input 60,000 – 140,000 Btuh

The high efficiency gas furnace may be installed free standing in a utility room, basement, or enclosed in an alcove or closet. The rounded corner jacket provides a pleasing “appliance appearance.” Design certified by CSA for application in Canada and the United States.

WARRANTY

• 10 Year all-parts warranty.
• 10 Year Quality Pledge to replace the unit if the heat exchanger fails within the first 10 years of operation, to the original owner.
• Consumer product registration required for 10 year All Parts Warranty and Quality Pledge within a limited period of time after the installation. See current warranty document or visit our consumer web site listed on the back of this document for warranty details.
• When registered, this product is upgraded to a limited lifetime heat exchanger warranty

FEATURES and BENEFITS

• ISEER : Energy efficient brushless DC (ECM) motor gives up to 1 SEER point efficiency gain in cooling. •

• 100% fired and tested: All units and each component are tested on the manufacturing line.

• Best packaging in the industry: Unique comer post design assures product will arrive to the homeowner dent free. Low Boy Height: Easy to apply in low celling applications, works well with taller high SEER coils, easier to handle and install.

• Tubular primary heat exchanger: Heavy gauge aluminized steel heat exchanger assures a long life.

• 30 second blower delay at start-up: Assures a warm duct temperature at fumie start-up. Adjustable blower off settings (80, 90, 120 and 180 seconds) 30 second post purge: Increases life of heat exchanger.

• Two Stage Inducer: Optimizes efficiency on first stage heat and reduces sound levies.

• Hot surface igniter: Innovative application of a silicon nitride igniter. Utilizes proven Smartlite” technology.

• Color coded wire harness: Designed to fit the components, all with quick-connect fittings for ease of service and replacement.
  High static blowers: All models equipped with high static blowers.

• 90 second cooling cycle blower-off delay (TDR): increases cooling performance when matched with a NORDYNE coil.

• Flexible category I venting system : Maybe vented with dedicated venting system or common vented with other category one appliances.

• LP convertible: Simple burner orifice and regulator spring change for ease of convertibility.

• Diagnostic lights for easy troubleshooting without
  counting flashes: Dedicated light forclemed signal strength and 2 lights in combination to indicate all other fault codes with easy to recognize states without counting flashes

• integrated control board : Incorporates connections for electronic air cleaner, humidifier and twinning.

• Two piece door design: Enhances furnace appearance and uses captured screws to prevent leasing door

• screws. Blower Compartment: Insulated for ultra quiet operation.

GAS FURNACE COMPONENTS

1. Blower Assembly
2. Blower Door Switch
3. Burner Assembly
4. Flame Roll-Out Switch
5. Flame Sensor
6. Furnace Control Board
7. Gas Manifold
8. Gas Valve
9. Igniter
10. Inducer Assembly
11. Main Air Limit Switch
12. Motor Choke (3/4 and 1HP only)
13. Motor Control Board.
14. Motor Control Box
15. Pressure Switch(s)
16. Transformer

**Upflow/Horizontal Gas Furnace

**

1. Blower Assembly
2. Blower Door Switch
3. Burner Assembly
4. Combustion Tube
5. Flame Roll-Out Switch
6. Flame Sensor
7. Furnace Control Board
8. Gas Manifold
9. Gas Valve
10. Igniter
11. Inducer Assembly
12. Main Air Limit Switch
13. Motor Choke (3/4 and 1HP only)
14. Motor Control Board
15. Pressure Switch(s)
16. Transformer

DIMENSIONS

*TA Model #’s| Dimension “A”| Dimension “B”| Dimension “C”| Dimension “D”
---|---|---|---|---
060-6A1| 14 ¼| 10 ¾| 12 ⅝| 12 ⅞
080-6B1| 17 ½| 11 ¾| 15 ⅞| 16 ⅛
100-6C1| 21| 14| 19 ⅜| 19 ⅝
120-6C1
140-6$1| 24 ½| 15 ¼| 22 ⅞| 23 ⅛

FG7TA 80+ High Efficiency Upflow/Horizontal Series

⅛ *TK Model| Dimension “A”| Dimension “B”| Dimension “C| Dimension “D
---|---|---|---|---
060-VA1| 14 14| 103/4| 125%| 127/8
080-VB1| 17 1/2| 11 3/4| 1578| 168
100-VC1| 21| 14| 1938| 1958

120-VC1

FG7TK 80+ High Efficiency Downflow Series

BLOWER PERFORMANCE – FG7TA/TK

Nominal Heating Airflows (CFM) and Temperature Rise (°F)

A Cabinet| *TA/TK-060( )-VA1
Models
---|---
Switch Settings HEAT| Input (BTU) 60000
A/B       2     3 4| CFM| Temp Rise (°F)
0| 0| 0| 0| 640| 69
0| 0| 0| 1| 720| 62
0| 0| 1| 0| 800| 56
0| 0| 1| 1| 880| 51
0| 1| 0| 0| 960| 46
0| 1| 0| 1| 1040| 43
0| 1| 1| 0| 1120| 40
0| 1| 1| 1| 1200| 37
B Cabinet*| TA/TK-080( )-VB1
Models
---|---
Switch Settings
HEAT| Input (BTU)
80000
A/B       2     3 4| CFM| Temp
Rise (°F)
1| 0| | 0| 1000| 59
1| 0| | 1| 1100| 54
1| 0| 1| 0| 1200| 49
1| 0| 1| 1| 1300| 46
1| 1| 0| 0| 1400| 42
1| 1| 0| 1| 1500| 40
1| 1| 1| 0| 1600| 37
1| 1| 1| 1| 1700| 35
C Cabinet| TA/TK-100( )-VC1 Models| TA/TK-120( )-VC1 Models**
---|---|---
3WITCH 3ETTINGS (EA4| )NPUT (B45) 100000| )NPUT (B45) 120000
A/B    2 3 4| C&M| 4EMP2ISE ( &)| C&M| 4EMP2ISE ( &)

| 0| 0| 0| 1000| 74| 1000| 89

| 0| 0| 1| 1115| 66| 1115| 80

| 0| 1| 0| 1230| 60| 1230| 72

| 0| 1| 1| 1345| 55| 1345| 66

| 1| 0| 0| 1460| 51| 1460| 61

| 1| 0| 1| 1575| 47| 1575| 56

| 1| 1| 0| 1690| 44| 1690| 53

| 1| 1| 1| 1805| 41| 1805| 49

Notes:

1. Two openings are recommended for airflows above 1600 CFM if the filter(s) is (are) adjacent to the furnace.
2. Temperature rises in the table are approximate. Actual temperature rises may vary.
3. Temperature rises that are shaded in grey are for reference only. These conditions are not recommended.

COOLING AIRFLOWS

MODEL IDENTIFICATION CODE

SPECIFICATIONS

FG7TA/TK MODEL NUMBERS| 060C- VA1| 080C- VB1| 100C- VC1| 120C- VC1| 140C- VD1
---|---|---|---|---|---
Input – Btuh (a)| 60,000 / 39,000| 80,000 / 52,000| 100,000 / 65,000| 120,000 / 78,000| 140,000 / 91,000
Heating Capacity – Btuh| 48,000 / 31,200| 64,000 / 41,600| 80,000 / 52,000| 96,000 / 62,400| 112,000 / 72,800
AFUE| 80.0| 80.0| 80.0| 80.0| 80.0
Blower D x W| 10 x 6| 11 x 8| 11 x 10| 11 x 10| 11 x 10
Motor H.P. – Speed – Type| 1/2 – Variable| 1/2 – Variable| 3/4 – Variable| 3/4 – Variable| 1 – Variable
Motor FLA| 6.2| 6.2| 8.7| 8.7| 11.7
Rated Ext. SP – In. W.C.| 0.5| 0.5| 0.5| 0.5| 0.5
Temperature Rise Range – ºF| 25-55| 30-60| 35-65| 35-65| 40-70
Shipping Weights| 115lbs| 110lbs| 125lbs| 135lbs| 155lbs

ACCESSORIES

FG7TA/TK KITS

Description| SKU
“B”, “C”, “D” Cabinet downflow sub base kit| 904911
U.S. LP Conversion kit (0 to 10,000 ft.)| 904914
Canada LP Conversion kit (0 to 4,500 ft.)| 904915
Bottom return filter 20 per box, “A” cabinet| 903088
Bottom return filter 20 per box, “B” cabinet| 904916
Bottom return filter 20 per box, “C” cabinet| 904917
Bottom return filter 20 per box, “D” cabinet| 904918
Side return filter kit| 541036

GENERAL TERMS OF LIMITED WARRANTY

NORDYNE will furnish a replacement for any part of this product which fails in normal use and service within the first ten years of installation, in accordance with the terms of the warranty.

For complete details of the Limited Warranty, including applicable terms and conditions, see your local installer or contact the NORDYNE warranty department for a copy.

COMPLETE CONTOR GENUINE SALIJE

8000 Phoenix Parkway | O’Fallon, MO 63368-3827
Specifications and illustrations subject to change without notice and without incurring obligations. Printed in U.S.A (02/2010)
2160-0210 (Replaces 216D-0309)
www.frigidairehvac.com
HIGIDARE of tone Products Inc and used under a cms from Electriu Home Products x Notek HVAC LLC Red

References

• TCPDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>