SHANQIU FX5-12 Mini UPS Battery Backup Uninterruptible Power Supply User Manual

SHANQIU FX5-12 Mini UPS Battery Backup Uninterruptible Power Supply User Manual

Instruction of the components

1. 5V USB Outpu
2. 5V DC Output
3. 9V DC Output
4. 12V DC Output
5. 12V DC Input
6. 5V USB Input
7. 25% Battery indicator
8. 50% Battery indicator
9. 75% Battery indicator
10. 100% Battery indicator
11. ON/OFF switch
12. Working/Charging indicator

Features

1. High capacity lithium batteries, provides long backup use to the loading devices.
2. High compatibility, suitable for most digital products in the market.
3. Two ways of input, both DC(fast) input with adapter and USB(slow) input are supported.
4. USB output, used as a normal power bank for digital products such as smartphone, bluetooth speaker, iPad, PSP, ect.
5. DC output, used for router, modem, IP camera, fax machine, printer, fingerprint recorder, security camera, ect.
6. Safe to use, intelligent circuit design with over-charging, over-discharging, overtemperature and short circuit protection.

How to use

1. Input, this mini UPS offers two ways of input for you (please donot use both of the inputs at the same time).
   USB mode (Slow): in this mode, this mini UPS can be used as a normal power bank. it can be charged by a 5V2A or maximum 5V3A adapter with micro USB cable (port ⑥). The charging speed of this mode will be a little slower, so we advise NOT to connect load devices while charging by USB.
   DC mode (Fast): the mini UPS also can be charged by a 12V3A DC adapter (port ⑤), which is provided in the package, in this mode, the mini UPS can be connected load devices while charging at the same time. however, do NOT exceed it’s loading capacity (30W), otherwise, it may cause auto-self protection. (see <3> below) in the process of charging, the power indicator light indicates the capacity of the battery by 25%, 50%, 75%, and 100% increasingly. when disconnect the power, the status light become red, it means the mini UPS is discharging with the backup battery, and the power indicator light will turn off one by one from 100%, 75%, 50% to 25%. then, when the light of 25% is flashing, it means that the battery power is very low. The mini UPS will shut down automatically when it is out of battery, it will restart when power recovers.

2. Output, when use this mini UPS, please DO check the voltage and current that required by the loading device before plug into the output ports, make sure that the voltage and current are suitable for your device
   This mini UPS offers 3 ports of DC output and 1 port for USB output as below:
   Port①: 5V USB, this port provides 5V/2A USB output.
   Port②: 5V DC, this port provides 5V/2A DC output.
   Port③: 9V DC, this port provides 9V/2A DC output.
   Port④: 12V DC, this port provides 12V/2A DC output.
   Please be noted the compatiblity of current, the output interfaces of this mini UPS will detect the current required by the loading device and provide the appropriate current to the loading device automatically.
   for example, Port ④: 12V 2A DC, this port can support 12V voltage at any current below 2A.
   12V / 0.5A, 1A, 1.5A, 2A are all supported by this port.

3. Overloading
   The maximum output power of this mini UPS is 30W. if the loading devices are more than 30W, it will active overloading self-protection. (see 5. if it’s happened)
   How to calculate the used power, (P=UI), power=voltage × current for e.g.,
   a 5V/2A USB output will consume 5V × 2A = 10W.
   a 5V/2A DC output will consume 5V × 2A = 10W.
   a 9V/2A DC output will consume 9V × 2A = 18W.
   a 12V/2A DC output will consume 12V × 2A = 24W.
   that means, users could use a 5V/2A DC output and 9V/2A DC output at the same time, because the total power consumption is 28W, less then the limit 30W.
   however, if the mini UPS has been connected with a 12V/2A required device, users could NOT add anymore device to this mini UPS.

4. If it is not used for long period, please keep it fully charged and keep it in a cool place. it is recommended to charge the battery once per month in case of emergency use.

Self-protection

If all LED lights are flashing suddenly and no more power supply, do not worry, normally it means self-protection. it may happen in the situations below:

1. Bad weather, such as, thunderstorms
2. Incorrect operation, such as, connect to the wrong interface or device
3. Over-discharge and overcharge
4. The loading device short circuit or damage, ect.
5. Overloading, exceed the maximum loading capacity.
6. Over-temperature

please disconnect the mini UPS with the devices immediately, after a while, connect the original charger to re-active the mini UPS.

Specifications

References

• HOME

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>