ASUS M601 ROG Falchion Wireless Keyboard User Guide
- June 4, 2024
- Asus
Table of Contents
ASUS M601 ROG Falchion Wireless Keyboard
Package Content
- ROG Falchion Wireless Keyboard
- Keyboard Cover
- Technical Data
- Usb Type-C Cable
- Wireless dongle Extender
- Usb Wireless dongle
- Sticker
Keyboard features
Top view
Rear view
**Left view**
- Win lock indicator /Win lock
- RGB indicator
- Caps Lock indicator
- Kickstand
- Power switch
- USB Type-C port
- Magnetic dongle storage
- Up Button
- Slide Bar
- Down Button
Getting started
- Connect the bundled Type-C cable to your keyboard.
- Connect your keyboard to the PC.
- Download and install the Armory Crate software from https//www.asus.com/supportonly/Armoury%20Crate/ HelpDesk Download/
- Follow the software instructions to update your keyboard’s firmware.
- Customize your keyboard using Armory Crate
Setting up as a wireless keyboard
- Remove the wireless dongle from the keyboard
- Insert the wireless dongle to a USB port on the PC.
- Set the power switch to ON.
Battery Status
The RGB indicator on your gaming keyboard will turn red (breathing) and the LEDs for all the other keys will switch off when the battery power is below 209% in wireless mode. You may charge your gaming keyboard by using the bundled US8 cable.
Key Combinations
Media Control
Function Key
Hardware Reset
On the Fly Macro Reading
Default Profiles
Function Lock
Safety Guidelines
Keep the device away from liquid, humidity, or moisture. Operate the device only within the specific temperature range of 0°’C(32°F) to 40C(104F). When the device exceeds the maximum temperature, unplug or switch off the device to let it cool down.
Notices
Limitation of Liability
- Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property: or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product.
- ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement.
- This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING:
- THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES;
- LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR
- SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this and equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION! The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Compliance Statement of Innovation, Science and Economic Development
Canada (ISED)
This device complies with Innovation, Science and Economic Development Canada
licence exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Innovation, Science and Economic Development Canada (ISED) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has also been evaluated and shown compliant with the ISED RF Exposure limits under portable exposure conditions. antennas are less than 20 cm of a person’s body).