EMEET AirFlow Wireless Open Ear Deign Earbuds User Manual

EMEET AirFlow Wireless Open Ear Deign Earbuds

What In The Box

Wearing

Overview

Connection and Pairing

1. Pair with a smartphone
2. Place both earbuds into the charging case, press and hold the touch area of both earbuds at the same time until the status indicator outside the charging case flashes blue, which indicates the earbuds are in Bluetooth pairing state.
3. Turn on your phone, select EMEET AirFlow in your device Bluetooth list to pair.
4. Connect to a PC
   • Plug in the included USB Dongle to your PC’s USB port for operation.

Download the EMEET TUNE Software

Operation Instructions

Music mode And Call mode

Indicator Description

LED Indicator A

LED Indicator A

Charging| Green breathing light
Fully charged| Off
Pairing| Flash blue

Pairing succeeded

| Blue for 5 seconds and off

UV sterilization button/indicator B

UV sterilization button/indicator B

Sterilizing| Purple breathing light
Sterilization completed| Green for 5 seconds and off
Unable to sterilize reminders/ Sterilization interrupted| Purple blinks for 3 seconds and off
Manual sterilization| Long press the UV sterilization button for 2 seconds to manually perform UV sterilization

Limited Warranty

EMEET Two(2) Years Limited Warranty

Limited Two(2) Years Warranty with EMEET proof of purchase. The warranty does not cover normal wear and tear or damage caused by accidents or misuse. To protect your rights, please keep the proof of purchase. For service, please contact us:

• + 1 888 959 5320 (EST 9:00am-5:00pm)
• support@emeet.com
• www.emeet.com

Safety Guide

Caution: To avoid electrical shock, do not open the housing of this product. In addition, users do not need to use the product’s internal parts. To repair the product, please contact qualified maintenance personnel or mail the product to our after-sales department.

1. Please read this guide carefully.
2. Please keep this guide.
3. Please observe all warnings.
4. Please follow all instructions.
5. When cleaning this product, use a dry cloth only.
6. Choking hazard – This product contains small parts. It is not suitable for children under the age of 3.
7. Do not put this product near a heat source, such as a heating radiator, hot air regulator, stove, or loudspeaker (including amplifiers) that produces heat.
8. Do not use this product if you must remain alert of your surroundings, for example, while driving a car or riding a bike.
9. Do not submerge this product in water or expose it to a damp environment for a long period of time. Do not use this product when engaging in water sports, such as swimming or surfing.
10. Please protect the power cable and audio cable. Do not step on or apply pressure on them. Do not pull on the product’s plug, socket, or cable outlet.
11. It is recommended that users use the accessories that have been specified by the vendor.
12. Do not expose the battery to environments with excessive heat, such as direct sunlight or sources of fire.
13. Connect a power supply within the specified voltage range.
14. If a power cable that is connected to the product is not currently being used to charge the product, please disconnect the power cable from the port and shut off the power supply.
15. To repair the product, please contact our professional maintenance personnel. If the product is damaged, the product should be repaired. For example, if the power cable or plug is damaged, liquid has flowed into the product, an object has fallen into the product; the product has come into contact with rain or moisture, the product cannot operate properly, or if the product has fallen.

Regulatory Compliance Information

EU/UKCA Compliance:

Hereby, SHENZHEN EMEET TECHNOLOGY CO., LTD. The corporation declares that the radio equipment is in compliance with < Directive 2014/53/EU / RER 2017 (SI 2017/1206)>. A copy of the EU/UK Declaration of Conformity is available at http://www.emeet.ai/Certificate.html

1. The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction.
2. If you use a third-party charger, the recommended output voltage/current of the adaptor is 5Vdc/1A.,and the adapter shall be CE/UKCA approval type.
3. It is recommended to charge the product in an environment with a temperature that ranges from 5°C~25°C.
4. Caution risk of explosion if battery is replaced by an incorrect type.Dispose of used batteries according to the instructions.
5. Frequency: 2.4GHz (Bluetooth®)
6. Maximum Power: < 100mW
7. The suitable temperature for the product and accessories is 0~40°C.
8. Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher.
9. Excessive sound pressure from earphones and headphones can cause hearing loss.
   • Input: 5V 500mA

ISED Canada compliance:

FCC STATEMENT

1. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
2. This device complies with Industry Canada license-exempt RSS standard(s). Cet appareil est conforme avec Industrie Canada RSS exemptes de licence standard (s).
3. Operation is subject to the following two conditions:
4. this device may not cause interference.
5. this device must accept any interference, including interference that may cause undesired operation of the device.

IMDA Compliance

• Complies with IMDA Standards DA105282

FCC Compliance

• The device has been evaluated to meet general RF exposure requirement;
• The device can be used in portable exposure condition without restriction Federal Communication Commission (FCC) Radiatioon Exposure Statement.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

More detail

How to use

Documents / Resources

| EMEET AirFlow Wireless Open Ear Deign Earbuds [pdf] User Manual
AirFlow Wireless Open Ear Deign Earbuds, AirFlow, Wireless Open Ear Deign Earbuds, Open Ear Deign Earbuds, Deign Earbuds, Earbuds
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>