Leiden 2A4FX-A5 Car Wireless Charging Bracket Instruction Manual

Leiden 2A4FX-A5 Car Wireless Charging Bracket

Car Wireless Charger Manual

• Product Name: Wireless charging of the pickup light car holder
• Power: 15W, 10W, 7.5W, 5W
• Effective transmission distance: 1-6mm
• Product Size: 100.880.9549.4mm
• Charging interface: USB TYPE-C
• Packing list:
  • Car bracket x 1
  • Manual X1
  • Data linex 1
  • Car outlet base (clip) ×1

Functional components

Specifications

1. Weight: 103g
2. Material: PC+ ABS Vacuum plating + tempered glass
3. Input voltage/current: 5V/3A, 9V/2A
4. Output power: 15W, 10W, 7.5W, 5W automatic identification
5. Charging frequency: 110K-205KHz
6. Charging distance: 0-6mm
7. Support Specifications: Qualified with QI Wireless Protocol Charging
8. Support QC wireless fast charging equipment such as:
   • iPhone 15 Series, iPhone 14 Series, iPhone 13 Series,
   • iPhone 12 Series,iPhone 11 Series, iPhone XS Max,
   • iPhone XR, iPhone X, iPhone 8,iPhone 8X,
   • HUAWEI Mate 60 Series, Mate 50 Series, Mate 40 Series,
   • Mate 30 Series, Mate 20 Series, P50 Pro, P40 Pro, P30 Pro,
   • V40 Series, V30 Series, SAMSUNG GALAXY Series,
   • 58-S20 Series, Note8-10 Series.
   • Other Qi devices that support wireless charging
9. Devices that do not support wireless charging can be charged by purchasing wireless receivers that meet Qi standards.

Instructions For Use

1. Connect the vehicle’s wireless charging device to the appropriate data cable when using it.
2. Connect the USB port of the data cable to the charging interface on the car (e.g. cigarette lighter switching charger or using Qc3.0 car charger to make you use the car charging head without fast charging, there may be other problems such as slow charging)
3. The device clip clips the air outlet and can also be placed elsewhere, Fix the bracket.
4. After the device is powered on with 5-9V DC power, the LOGO atmosphere light will light up. It will automatically check and reset the left and right arm drag linkage once, and the red and green lights will flash alternately to start the reset. After the reset, the red light will light up. Touch the top sensing point or press the mechanical switch on the lower right back to open the left and right arms. After placing the phone in, the device will automatically clamp the phone. At this point, wireless charging will automatically charge the phone. After detecting wireless charging, it will be converted to a green light (for phones with wireless charging function). When taking out the phone, you need to touch the sensing power at the top corner of the back shell or the mechanical button on the lower right back. When you touch the sensing point position with your hand or lightly press the mechanical button on the lower right back, the device will automatically open its arms and take out the phone. When placing a mobile phone without wireless charging, the light will flash quickly with a foreign object switch.
5. The equipment has overvoltage protection, over-temperature protection, and magnetic field protection, Short circuit protection, if the equipment is abnormal, it will automatically stop working.
6. The fuselage equipment has a built-in battery, and the bracket can be opened without connecting the power data cable The closing and tightening works normally (wireless charging does not work), touch the front or back When the sensing position is opened, the wake-up logo atmosphere light is on for 5 seconds and automatically goes out, and the mobile phone is put on automatically
7. Pickup light – On by default when powered on, the light effect will jump with the volume of the music. Long press and hold the mechanical button on the back to turn off or turn on the control pickup light.

Precautions

1. Do not over-squeeze or hit the device
2. Do not use the wireless charger under severe high temperatures, humidity, or corrosive environments to avoid damaging the device’s circuit

Warranty card

The above information is to be filled out by the seller.

Thank you for using this product!

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located for operating in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>