Shenzhen Leiden Digital Technology T6 Car Wireless Charger Instruction Manual

Shenzhen Leiden Digital Technology T6 Car Wireless Charger

FEATURES

• Product Name: Car stand wireless charger (Intelligent sensing)
• Power: lOW, 7.5W, SW
• Effective transmission distance: 1-Scam
• Size: Middle disk diameter:
• 12.8cm7cm3.3cm
• Charging interface: USB TYPE-C

Packing list:

• Car bracket x 1, Manual Xl,
• Data line xl, Car outlet base(clip)xl

Functional components

Specifications

1. Model: T6
2. Weight: 113g
3. Material: ABS+PC Vacuum plating
4. Inputvoltage/current: 5V/2A, 9V/1.67A
5. Output power: lOW, 7.SW, SW automatic identification
6. Charging power!!r: 110K-205K Hz
7. Charging distance: 0-Smm
8. Support Specifications: Qualified with QI Wireless Protocol Charging
9. Support QC wireless fast charging equipment such as HUAWB Mate 30/Mate 20 / Mate RS/iPhone ll/ iPhone 11 pro/ iphone XS/iPhone XS Max/iPhone XR/iPhone X/iphoneSPlus/ iphoneatSAMSUNG Galaxy NotelO+SG/ Notel.O/Note9/Note81 S10+/S10/S9+ /S9/S8+ Wireless charging
10. Devices that do not support wireless charging need to purchase QI-compliant wireless receivers before they can be used.

Instructions For Use

1. Connect the vehicle’s wirelen charging device to the appropriate data cable when using it.
2. . The device clip clips their outlet and can also replace elsewhere
3.  After the device is powered on an SV-9V DC power supply, it will automatically check the tension and the blue indicator light will be on. When the object is close to the device Scam-20cm, the automatic induction will open the arms and put the phone into the phone, the device will automatically clamp the phone.

Precautions

1. Do not over-squeeze or hit the device
2. Do not use the wireless charger under severe high temperatures, humidity or corrosive environment to avoid damaging the device’s circuit.

FCC

This device complies with part 15 of the FCC Rules. Operation is Subject To the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected

Thank You For Using This Product

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>