SESSAK LIGHTING S5192-1 Cruz Wall Lamp Installation Guide
- June 15, 2024
- SESSAK LIGHTING
Table of Contents
S5192-1
220-240V
-~ 50/60Hz
1x E14 Max. 7W
Read the entire instructions before installing the luminaire Save the
instructions for potential future need Disconnect the electrical power-supply
before installation or service.
If the electrical cord of the luminaire becomes damaged, the lumnaire must be
discarded.
Symbols that pOTFNTIAII Y can be found on the luminaire and their meaning.
CHECK, the luminaire.
Class I. The luminaire must be connected to protective earth.
Class II. The luminaire is double-insulated and is not to be connected to
protective earth.
** The product conforms with health, safety, and environmental protection
standards for products sold within the EuropeanEconomic Area (EEA)
The protective earth cable (usually yellow-green) is connected to the terminal
identified by this symbol.
L The phase (live) cable (usually brown) is connected to the terminal
identified by this symbol (L)
N Ki The neutral cable (usually blue) is connected to the cable N
identified by this symbol (N)
IP21 States the minimum distance in meters to the area that is to be
illuminated, TAKE INTO ACCOUNT doors, widows etc., that could possibly come
within this distance when they are opened.
Ingress Protection class 21 (protection against dripping water)
IP44 Ingress Protection class 44 (protection against splashing water)
MAX W** The HIGHEST ALLOWED power of the bulbs in Watts
Only for indoor use
Is NOT to be thrown away with household waste. You can help in the protection
of the enviroment by taking discarded products to a recycling-station intended
for them.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>