U King ZQ03004 Four Lens Beam DJ Disco Stage Light User Manual

: June 15, 2024
: U King

Table of Contents

General Instructions
Technical Specification
Fixture Appearance
Installation
LCD Digital Display
Read User Manual Online (PDF format)
Download This Manual (PDF format)

USER MANUAL
FOUR LENS BEAM DJ DISCO S
TAGE LIGHT SHOW SYSTEM

ATTENTION: Read this manual before using. Do not attempt to open the housing or repair this device by yourself without contact us!

General Instructions

Unpacking:
Thank you for purchasing this product. Please read user guide for safety and operations information before using the product. Keep this manual for future reference. This product can create perfect light programs and effects since it has passed a series of strictly tests before delivery. Please check the attachments listed on the page after opening the carton. Immediately upon receiving a fixture, carefully unpack the box. Check the box contents to ensure that all parts are present and that they are in good condition. If any part appears damaged from shipping, or if the box shows signs of mishandling, notify the shipper immediately. In addition, retain the box and all the packing material for inspection. In any event, save the carton and all packing material because, in case that you have to return the fixture to the factory, you will have to do so in its original box, with its original packing.
‘What is included: 1 Light, 1Power Cable, 1*User Guide

Technical Specification

*Feature:

Built-in many kinds of nice amazing cffects
Four working modes: AUTO, Sound active, DMX512, Master/Slave
Under DMX mode, user can set light ON/OFF, output lens selection with adjustable speed, flash output lens selection with adjustable speed, spin direction with adjustable speed.
LCD display with 4 digital button: Mode, UP, DOWN, ENTER
Beam angle: 120 degrees
Scanning Micro-step motor scanning at big angle
Play Mode Sound Active, AUTO, DMX512, Master/Slave
DMX Channel: 12CH
Interface: 3 pins XLR jack for DMX or Maser-Slave linking
Power Supply: Bi-Voltage 110V to 220V-250V, 50/60HZ
Net Weight: 2.3Kg
*Applicable Place: DJs, Bands, Bars, Pubs, Clubs, KTV, Family party, ctc.

Fixture Appearance

NON-INTERLOCKED HOUSING WARNING
*This unit contains high power laser devices internally. Do not open the laser housing, due to potential exposure to unsafe levels of laser radiation. The laser power levels accessible if the unit is opened can cause instant blindness, skin burns and fires.

Cleaning
Fixture Cleaning: Due to fog residue, smoke, and dust cleaning the internal and external lenses should be carried out periodically to optimize light output.

Use normal glass cleaner and a soft cloth to wipe down the out- side casing.
Clean the external optics with glass cleaner and a soft cloth every 20 days.
Always be sure to dry all parts completely before plugging the unit back in. Cleaning frequency depends on the environment in which the fixture operates (Le. smoke, fog residue, dust, dew). In heavy use we recommend cleaning on a monthly basis. Periodic cleaning will ensure longevity, and crisp beam output.

Installation

*Laser effects projected 3 meters (9.8 ft) above the audience are eye safe. A survey should be taken to assess the likelihood of any reflective surfaces (such as high windows, chrome bars etc) bouncing stray beams back down into the audience.

Using a fastening clamps on the light and tight to the ceiling in a strong hook…
Make sure its correct power output and plug the power cable to the wall socket.
Power must be in earth! Power on the light.
Do not shoot the beams to the audience!
Do not look direct into the laser aperture once the laser light is ON. Please pay attention to the Laser Danger Warning Label!

Laser Expected Lifespan
Laser gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration of this decline. Packaged in clusters, Laser exhibit higher operating temperatures than in ideal or singular optimum conditions. For this reason when all color Laser are used at their fullest intensity, life of the Laser is significantly reduced. It is estimated that a viable lifespan of 5,000 to 10,000 hours will be achieved under normal operational conditions. If improving on this lifespan expectancy is of a higher priority, place care in providing for lower operational temperatures. This may include climatic-environmental and the reduction of overall projection intensity.

Warranty Warnings:

Damages caused by the disregard of this user manual are not subject to Warranty.
‘The dealer will not accept liability for any resulting defects or problems.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons. Please note that damages caused by manual modifications on the device or unauthorized operation by unqualified persons are not subject to warranty.
If this device will be operated in any way different to the one described in this manual, it may suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-circuit, burns electric shock, etc.

After trying the above solution you still have a problem, please contact your dealer or our company
for service.

LCD Digital Display

MENU: Function mode selection, such as DMX512/Masterslave, AUTO strobe, Sound Active Strobe, Constant light on, brightness adjustment DOWN/UP: previous or next, increase or decrease
Enter: confirm and save the selection

Display menu:

defn	LIG1 (1G00-1G99)

LIG2 (1Y00-1Y99)
LIG3 (1b00-1b99)
LIG4 (2G00-2G99)
AUTO mode| AUT1 (JAO1-JA99) AUT2 (JCO1-JC99)
Sound mode| SA00 -SA99
Sound mode 2| SC00 -SC99
DMX channel (12CHs)| A001 —AS512

DMX Channel:

Mode (12)	Description	Value and function
1	Special channel	000-005 N/A

006-050 AUTO 1
051-100 AUTO 2
101-150 Sound 1
151-200 Sound 2
212-255 N/A
2| Laser green 1| 000-255
3| Laser Yellow| 000-255
4| Laser blue| 000-255
5| Laser red| 000-255
6| Patterns| 000-004 Null
005-009 patternl
010-014 pattern2
015-019 pattern3
020-024 patternd
025-029 patternS
030-034 pattern6
035-039 pattern7
040-044 pattern8
045-049 pattern9
050-054 pattern10
055-059 patternl 1
060-064 pattern12
065-069 patternl3
070-074 pattern14
075-079 pattern1 5
080-084 pattern16
085-089 pattern17
090-094 patiern 8
095-099 pattern19
100-104 pattern20
105-109 pattern21
110-114 pattem22
115-119 patiem23
120-124 pattern24
125-129 pattern2s
130-134 pattern26
135-139 pattern27
140-144 pattern28
145-149 pattern29
150-154 pattern30
155-159 pattern3|
160-164 pattern32
165-169 pattern33
170-174 pattern34
175-179 pattern3s
180-184 pattern36
185-189 pattern37
190-194 pattern38
195-199 pattern39
200-204 patiernd0
205-209 patternd1
210-214 patiern42
215219 patternd3
220-224 patternd4
225229 patternds
230-255 Dots
7| Pan start position| 000-199 Left to right moving
200-255 Auto Left to right moving
8| Tilt start position| 000-199 Up to Down
200-255 Auto Up to Down
9| Pattern set-position turning| 000-063 Original position
064-127 90° turning
128-191 180° turning
192-255 270° turning
10| Whole turning| 000-009 NULL
010-120 Clockwirse fast to slow
121-134 NULL
135-245 Counter-clockwise slow to fast
246-255 NULL
11| Reversing| 000-009 NULL
010-120 Left to Right, fast to slow
121-134 NULL
135-245 Up to Down, slow to fast
246-255 NULL
12| Zoom IN/OUT| 000-127 Out to In
128-255 Slow to fast