U King Moving Head Lights 120W 2 in 1 Bee Eye Gobos Lights User Manual

Pattern+Bee Eye Moving Head Light

USER MANUAL

Installation and operating instructions:

After the power is plugged in and the switch is turned on, “rSt” is displayed. The moving headlights are being reset, please do not operate.

1. Plugged into a grounded power outlet for indoor use only.

2. Don’t expose the device to rain or moisture, avoid the risk of fire or electric shock. Make sure that no flammable objects near the device.

3. Install the equipment in a well-ventilated place at least 50cm from any surface, and ensure that the ventilation slots are not blocked.

4. Disconnect the equipment from the power supply before any operation.

5. The ambient temperature should not exceed 40°C, and the maximum ambient temperature is 45°C. Don’t operate the device at higher tempratures.

6. The equipment should be stopped immediately, if a fault occurs, and do not repair the equipment by yourself. Improper maintenance can result in damage and malfunction. Contact technical support for repair approval.
   Only the same accessories can be used with the original parts, and make sure the power cord is not blocked or damaged.

7. Do not expose your eyes to light sources, which can be a sign of a seizure in sensitive people.

8. The lamps are only used for decoration and not suitable for ordinary household lighting.

9. Replacing the fuse: Unplug the device from the power supply, remove the fuse holder from its original position with a srewdriver, take out the burnt fuse, replace the fuse with the same characteristics, then re-rotate the screw, and connect the device to the  power supply superior.

10. WARNING: Stop using it if the fuse is still blowing after being replaced. Please contact customer support for further instructions, continued use may cause serious damage.

11. Fix the equipment with the screw holes on the bracket to ensure that the equipment is firmly fixed to prevent vibration and movement during operation, and always check whether the structure of the equipment is strong enough to withstand equipment  that is at least ten times.

12. The equipment must be fixed by professionals in places that elders and children cannot reach, and no one can pass under or over the pedestrian crossing.
    Please read this manual carefully before operating this product.

13. End-of-life of the product: This sign indicates that this product should not be thrown into household waste in European Community countries and that waste should be recycled to support the sustainable recycling of resources in order to protect the  environment and human health Utilize.
    If you need to recycle used electrical appliances, please go to an electrical appliance collection center or contact the dealer where you purchased the product to ensure the ecological recycling of the product.

Please read this manual carefully before use
Thank you for using our Moving head light, Note:this manual contains important information.
installation,operation according to requirment of manual.
Please save this manual for emergencies.

Startup steps for various modes

1. Automatic mode
   Press“MENU”to find”SLnd”,press“ENTER”.
   Press “Up” or “Down” to select “SoUd”and press “ENTER” key.

2. Sound Mode
   Press “MENU” to find “Soud” and press “ENTER”.
   Press “Up” or “Down” to select “SoUd”and press “ENTER” key.

Technical Parameters

Voltage: AC100-240V 50/60 HZ
Light source 1: 6 Cree 4IN1 (RGBW) lamp beads
Light source 2: 1 pcs white light
Channel: 16CH/18CH
Control mode: DMX512, Sound, Auto, Master-slave
X axis: 540°
Y axis: 180°

Unpacking instructions

When you receive the device, open it and check whether the goods are complete. If not, please notify the carrier immediately and preserve the packaging, and if the damage is revealed, preserve the packaging and all packing materials for safe transportation of  the device.

• 1 pcs lamps
• 1 instruction manual
• 1 power cord
• 1 bow bracket
• 2 screws
  (installed on the machine)

LED DISPLAY

1. Control buttons
   (MENU UP DOWN ENTER)

2. Display

3. Microphone

4. DMX IN

5. DMX OUT

6. POWER IN

7. Fan

Procedure for Installing support

|
---|---
Install the bow bracket and fix itwith screws| Install the bow bracket winth the bow bracker
|
Confirm that the bracket porsition is installed correctly| Position is installed successfully Confirm whether the bracket

Hooks bracket are not included in the package

Console mode and master-slave mode:
DMX OUT to the DMX IN of the No. 1 fixture; DMX OUT of the No. 1 fixture is connected to the DMX IN of the No. 2 fixture;
Press “MENU” to find “Addr”, press “ENTER”, display “A001”
press “Up” or “Down” to select the value of the console;
Master and slave settings: No. 1 light fixture is set to self- propelled or voice-activated function according to the startup mode; 2, 3, and 4**** are set to DMX512 mode: DMX address code is 001;

MENU

(DMX self-propelled voice control slave)
4| SenS| Voice control sensitivity adjustment (0-99)
5| LED| ON, OFF screen always on setting
6| DISP| YES, NO display forward and reverse settings
7| Pan| YES, NO Motor X forward and reverse settings
8| Tilt| YES, NO Motor Y forward and reverse settings
9| LoAd| YES, NO restore factory settings
10| rESt| System reset

System reset

dark to bright

5| 7| Dyeing strobe| 0-9| No function
10-255| Synchronous strobe speed from slow to fast
6| 8| Pattern dimming| 0-255| 1-127 strobe, 128-255 dimmin
7| 9| Color plate| 0-255| Selection of color
8| 10| Pattern tray| 0-255| Pattern selection
9| 11| R dimming| 0-255| Red dimming from dark to bright
10| 12| G dimming| 0-255| Green dimming from dark to bright
11| 13| B dimming| 0-255| Blue dimming from dark to bright
12| 14| W dimming| 0-255| White dimming from dark to bright
13| 15| Dyeing color selectio| 0-255| Dyeing effect selection
14| 16| Rotating motor| 0-127| 0-360 degree positioning
128-191| The motor rotates clockwise from slow to fast
192-255| The motor rotates counterclockwise from slow to fast
15| 17| Macro function| 0-29| Channel 1 to channel 13 are valid
40-149| Self-propelled
150-255| Light body sound control
16| 18| Reset| 0-240| No function
250-255| The lamp body is reset, valid for 3s.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>