JBL Wave Beam Completely Wireless Earbuds User Manual
- June 15, 2024
- JBL
Table of Contents
JBL Wave Beam Completely Wireless Earb
Product Information
- Model: WAVE BEAM
- Driver size: 8 mm/ 0.315 Dynamic Driver
- Power supply: 5V 1A
- Earbud weight: 4.4 g per pc (8.8 g combined)/ 0.0097 lbs per pc (0.0194 lbs combined)
- Charging case weight: 39.5 g/ 0.0871 lbs
- Earbud battery type: Lithium-ion polymer (48 mAh/ 3.85 V)
- Charging case battery type: Lithium-ion polymer (530 mAh/ 3.7 V)
Product Usage Instructions
How to Wear
Try different sizes (S/M/L) for a perfect fit and audio performance.
First Time Use
- Power on the JBL Headphones.
- Connect the headphones to your device using Bluetooth.
Controls
- HOLD (2S) to enable advanced controls by connecting your JBL WAVE BEAM to the JBL Headphones App.
- HOLD (5S) for manual setup, to connect to a new Bluetooth device, or perform a factory reset.
- Tap L/R to switch between Stereo Mode and L/R Mono Mode.
Charging
LED Behaviors
- (WHITE) Charging
- (BLUE) BT connecting
- (GREEN) BT connected
- (RED) Low battery
- (ORANGE) Mid battery
- (GREEN) High battery
- (OFF) Fully charged
Music Playback
Refer to the specifications for the specific duration.
Talk Time
Refer to the specifications for the specific duration.
Frequency Response
Refer to the specifications for the specific range.
quick start guide
WHAT’S IN THE BOX
APP
JBL Headphones
How to wear
-
Try different sizes for a perfect fit and audio performance
-
**S / M / L
**
FIRST TIME USE
power on & CONNECT
DUAL CONNECT
CONTROLS
Enable advance controls by connecting your JBL WAVE BEAM to JBL Headphones App
VOICEAWARE
power off
Manual SETUP
Connect to a new Bluetooth device
Factory reset
DO MORE WITH THE APP
Charging
Led Behaviors
TECH SPEC
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.
- This equipment complies with Directive 2014/53/EU radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- The portable device is designed to meet the requirements for exposure to radio waves established by European Union market(France). These requirements set a SAR limit of 2W/kg averaged over ten gram of tissue. The highest SAR value 0.221W/kg reported under this standard during product certification for use when properly worn on the head.
Warning
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT
CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO
THE INSTRUCTIONS
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>