SESSAK LIGHTING S54012-1 Zion Wall Light Instruction Manual
- June 15, 2024
- SESSAK LIGHTING
Table of Contents
SESSAK LIGHTING S54012-1 Zion Wall Light
S54012-1 220-240V ~ 50/60Hz 1 x GU10 Max. 10W
Read the entire instructions before installing the luminaire Save the
instructions for potential future need. Disconnect the electrical power-supply
before installation or service.
If the electrical cord of the luminaire becomes damaged, the lumnaire must be
discarded.
Symbols that POTENTIALLY can be found on the luminaire and their meaning. CHECK the luminaire.
- Class I. The luminaire must be connected to protective earth.
- Class II. The luminaire is double-insulated and is not to be connected to protective earth.
- The product conforms with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA)
- The protective earth cable (usually yellow-green) is connected to the terminal identified by this symbol. The phase (live) cable (usually brown) is connected to the terminal identified by this symbol (L) The neutral cable (usually blue) is connected to the cable identified by this symbol (N)
- States the minimum distance in meters to the area that is to be illuminated, TAKE INTO ACCOUNT doors, widows etc., that could possibly come within this distance when they are opened.
- IP21 Ingress Protection class 21 (protection against dripping water)
- IP44 Ingress Protection class 44 (protection against splashing water)
- MAX _W The HIGHEST ALLOWED power of the bulb(s) in Watts
- Only for indoor use
- Is NOT to be thrown away with household waste. You can help in the protection of the environment by taking discarded products to a recycling-station intended for them.
Instruction
SESSAK OY AB – PORVOO – FINLAND – WWW.SESSAK.FI
Read User Manual Online (PDF format)
Loading......