Fine Fixtures AC1TBHBL AC1 5 Inch Corrosion Resistant Toothbrush Holder Black Matte Instruction Manual
- June 15, 2024
- FINE FIXTURES
Table of Contents
- Fine Fixtures AC1TBHBL AC1 5 Inch Corrosion Resistant Toothbrush Holder
- Product Information
- Product Usage Instructions
- SPECIFICATIONS/TECHNICAL DATA
- TOOLS REQUIRED FOR INSTALLATION
- PRODUCT COMPONENTS
- INSTALLATION
- CLEANING INSTRUCTIONS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Fine Fixtures AC1TBHBL AC1 5 Inch Corrosion Resistant Toothbrush Holder
Black Matte
Product Information
Specifications/Technical Data
- Model: AC1TBH
- Address: 206 Wembley Road, New Windsor, NY 12553
- Phone: 718.602.6060
- Fax: 718.963.2082
- Email: info@finefixtures.com.
- Website: www.finefixtures.com
Product Components
- 2 Pieces of (S6) (M4*35)
- 2 Pieces of (M57) (M58)
Cleaning Instructions
Quality, technological processes, and materials are the features that
determine the high standards of our accessories. However, to avoid surface
alterations, it is necessary to follow a few guidelines:
- Clean all finishes exclusively with soap and water, and dry with a soft cloth.
- Do not use coarse cloths, abrasive products, acids, ammonia products, caustic substances, bleach, or solvents.
- In case of contact with these substances, rinse surfaces immediately and wipe dry.
- Remember that even fumes can damage the metal. Wash accessories next to the toilet bowl at regular intervals to avoid corrosion.
Product Usage Instructions
Installation
To install the toothbrush holder, please follow these steps:
-
Step 1: Gather Tools
Before starting the installation, make sure you have the following tools:- Tape Measure
- Level
- Pencil/Marker
- Drill
-
Step 2: Prepare the Installation Area
Choose a suitable location for the toothbrush holder. Ensure that it is easily accessible and at a comfortable height for users. -
Step 3: Mark the Mounting Holes
Using the pencil or marker, mark the locations for the mounting holes on the wall. Use a level to ensure the marks are straight. -
Step 4: Drill the Mounting Holes
Using a drill, carefully drill the marked holes on the wall. Make sure to use the appropriate drill bit size for the mounting hardware provided. -
Step 5: Attach the Holder to the Wall
Align the toothbrush holder with the drilled holes and secure it to the wall using the provided screws and anchors. Use a screwdriver or drill to tighten the screws properly. -
Step 6: Finalize Installation
Check if the toothbrush holder is securely attached to the wall. Adjust if necessary. Clean any dust or debris from the installation area.
Frequently Asked Questions (FAQ)
-
Q: Can I use abrasive products to clean the toothbrush holder?
No, it is not recommended to use abrasive products as they can damage the surface of the holder. Clean it with soap and water. -
Q: How often should I wash the toothbrush holder to prevent corrosion?
It is recommended to wash the holder next to the toilet bowl at regular intervals to avoid corrosion.
SPECIFICATIONS/TECHNICAL DATA
TOOLS REQUIRED FOR INSTALLATION
PRODUCT COMPONENTS
INSTALLATION
CLEANING INSTRUCTIONS
Quality, technological processes, and materials are the features that determine the high standards of our accessories. However, to avoid surface alternations, it is necessary to follow a few guidelines.
- Clean all finishes exclusively with soap and water, and dry with a soft cloth.
- Do not use coarse cloths, abrasive products, acids, ammonia products, caustic substances, bleach, or solvents.
- In case of contact with these substances, rinse surfaces immediately and wipe dry.
- Remember that even fumes can damage the metal. Wash accessories next to the toilet bowl at regular intervals to avoid corrosion.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>