SE24 Serenity 24 Inch Single Bathroom Vanity

Product Information

Specifications

• Model: SE24
• Draw Qty Part A: 2 Pieces
• Draw Qty Part B: 2 Pieces
• Draw Qty Part C: 2 Pieces
• Draw Qty Part D: 1 Piece (Length=115mm / 4 1/2 inches)
• Draw Qty Part E: 1 Piece (Length=139mm / 5 1/2 inches)
• Handle screws (M4*18mm): 4 Pieces
• Screws (M4*12mm): 4 Pieces
• Screws (M6*18mm): 8 Pieces
• Screws (M6*8mm): 8 Pieces
• Bracket (40X20X20mm): 4 Pieces

Product Usage Instructions

Step 1: Preparation

1. Ensure you have the following tools ready: Silicone/Caulk Gun,
   Tape Measure, Hammer, Knife, Pencil/Marker, Philips Screwdriver,
   Soft Cloth or Blanket, Drill, and Drill Bit.

2. Measure and mark the center line on the wall and floor.

Step 2: Mounting the Cabinet

1. Position the cabinet above the marked center line on the wall,
   ensuring it is at least 14.5 inches from the floor.

Step 3: Attaching Parts

1. Attach Part H using 8 Screws (M6*18mm).
2. Attach Part I using 8 Screws (M6*8mm).
3. Attach Part J using 2 Brackets (40X20X20mm).
4. Attach Part K using 2 Brackets (40X20X20mm).

Step 4: Installing Wooden Shelf

1. Place the wooden shelf inside the cabinet.

Step 5: Attaching Handles

1. Attach Part F using 4 Handle screws (M4*18mm).

Step 6: Finalizing Installation

1. Attach Part G using 4 Screws (M4*12mm).
2. Attach Part D and Part E.

Step 7: Completion

1. Ensure all parts are securely attached.

Frequently Asked Questions (FAQ)

Q: How far should the cabinet be from the floor?

A: The cabinet should be positioned at least 14.5 inches from
the floor.

Q: What tools do I need for installation?

A: You will need a Silicone/Caulk Gun, Tape Measure, Hammer,
Knife, Pencil/Marker, Philips Screwdriver, Soft Cloth or Blanket,
Drill, and Drill Bit.

INSTALLATION INSTRUCTIONS
SERENITY
VANITY COLLECTION
24″
MODEL# SE24

NO. Draw QTY

Part
A

2

Pieces

Part
B

2

Pieces

Part
C

2

Pieces

Part
D

Length=115mm(4 1/2″)

1
Pieces

Part
E

1

Length=139mm(5 1/2″) Pieces

Part
F

Handle screws(M4*18mm)

4
Pieces

NO. Draw QTY

Part
G

Screws(M4*12mm)

4
Pieces

Part
H

Screws(M6*18mm)

8
Pieces

Part
I

8

Screws(M6*8mm)

Pieces

Part
J
Part
K

Bracket(40X20X20mm)

4
Pieces

2
Pieces

2

Silicone

Safety Glass

Level

Silicone/ Caulk Gun

Tape Measure

Hammer

Knife

Pencil/Marker

Philips Screwdriver

Soft Cloth or Blanket

Drill

Drill Bit

MODEL# SE24

13/16″ (20)
18 7/8″ (480)
33 3/4″ (858)
14 1/8″ (358)

24″ (610)
4 1/2″ (115) 5 1/2″ (139)
8 9/16″ (217)
4 15/16″ (125)

4 ” (101)
12 11/16″ (323)
17 1/16″ (434)

18 5/16″ (465)

2 9/16″ (65)

8 7/16″ (215)
4 1/16″ (103)

4 3/4″ (120)

3

STEP #1

Center Line
18 3/8″ (467)
31 7/16″ (798)

WALL FLOOR

10

10

A

4

STEP #2
STEP #3
H

I

J

J

M6*8mm

I K
K

M6*18mm
H

14.5″
Putthecabinetabove14.5″fromthefloor
5

STEP #4 STEP #5

M4*12mm
G

Wooden shelf
G

D E
F
6

D
E
M4*18mm
F

STEP #6 STEP #7

B C
C B

7

DONE
33 3/4″ (858)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>