M-Style M Style NEO Mobile Phone Mount With 15W Wireless Charging Instruction Manual
- June 15, 2024
- M-Style
Table of Contents
M-Style M Style NEO Mobile Phone Mount With 15W Wireless Charging
Instruction Manual
INTRODUCTION TO M-STYLE NEO MOUNT
- This motorcycle phone mount with ireless charger, compatible with Qi 15W/ 10W/7.5W/5W wireless charging modes on the market. Input: DC 12V-24V
- There s an LED aperture and a power switch in the center of the phone mount. ‘When phone s not charged, the LED aperture power can be controlled by power switch, When charging phone, the LED aperture power turns o automatically.
- 0ne-push quick lock and release: Tilt the phone to push the top, and the phone holder will automatically hold your phone firmly. Hold the phone to push the top again o release it and take out your phone. Everything done with one hand.
- There is a safety switch on the back of the mount, after placing the phone, please tighten the knob; before taking out the phone, please loosen the knab.
- The main body of the phone mount is made of 606176 aluminum alloy Materia, CNC production process, firm structure and smooth surface.
- The phone holder panel and five-claws are covered with soft ilcone, shockproof protection, and prevent the phone from being scratched.
- When the product i received, the five claws have been covered with red soft silcone. The package comes with 5 peces of lack soft silicone, you can replace the silcone. o the five claws according to your preference.
- When receive product,the vibration dampener is already installed on back of phone holder. Attach the phone holder to the handlebar ail orrear-view miror fram via the included antitheft bal socket arm and hand iebarr ear-view miror mounting base.
- The anti theit double socket arm s made of 606176 aluminurm alloy material. The anti theft knob and anti et key of the socket arm are made of PAGG+GF30%6 material
- Adjustable screws are installed on the bottom, top and back of the holder to adjust the width height and thickness of the phone holder. The maximum thickness of ‘compatibie mobile phones is up to 20mm. Can accommodate 4.7-7.2 inch mobile phones.
- Waterproof grade: 66
PACKAGE CONTENTS
High-Speed Secure Lock
At placinthe phone, please lock the knob. Releasa the knob before emaving the
phone.
INSTALLATION INSTRUCTIONS
Mount To Handlebar
-
install Handlebar Base
-
head and the handlebar base ball head into the anti theft ball socket arm a the same time.
-
Lock the socket arm with the ant theft key. Finish installation
Mount To Rear-View Mirror Frame
-
Install Rear-View Mirror Base
-
Insert the phone mount ball head and the rear-view mirror base ball head into the anti-theft ball socket arm at the same time.
-
Lock the socket arm with the anti-theft key. Finish installation.
ADJUSTING LENGTH AND WIDTH
Loosen the corresponding screws on the back of the holder, and adjust the length and width to the position that best matches your phone.
ADJUSTING THICKNESS
Loosen the corresponding screws at the bottom and top of the holder, and
adjust the thickness to the position that best matches your phone.
Adjust the top screw
Adjust the bottom screw
BATTERY CONNECTION
Connect Power Via SAE Cable
Connect the red terminal of the SAE wire to the positive power supply of the
motorcycle electric door lock (power start switch),or directly connect to the
positive pole of the battery. The negative black terminal is connected to the
negative of the battery, or to any metal part on the motorcycle frame, and is
ready to use after power is applied.
Connect Power Via USB Cable
You can use a USB cable to connect to the USB port with afast charging
protocol on the motorcycle to get power.
Note: The wireless charger does not work when the phone holder s
connected to anon-fast charging protocol USB port to get power.
INSERTING THE MOBILE PHONE
Do you kave any questions or weed some help? Send email to [email protected]