M-Style BMW R1200GS Adventure Universal Auxilary Light Installation Guide
- June 15, 2024
- M-Style
Table of Contents
M-Style BMW R1200GS Adventure Universal Auxilary Light
Product Information
Specifications
- Product: Additional Lights
- Power: 12V
- Fuse: 20A Blade Fuse
- Color: White
- Connectors: Connector 1 and Connector 2
- Switch: Light Switch with 25mm and 22mm sockets
Product Usage Instructions
Installation
- Choose the installation site for the Additional Lights and fasten them using a screw or selected sleeve.
- Connect the wiring from the lights to the connectors designated for it, leading from the Additional Lights Relay. It is recommended to wire the additional lights together with the original harnesses of the vehicle’s light wiring.
- Connect the 20A Blade Fuse cable leading from the Additional Lights Relay to the vehicle battery. The red cable should be connected to the plus connector, and the black cable to the minus connector of the battery.
- Install the Light Switch in the desired position. The switch can be installed on the handlebars using the provided 25mm and 22mm sockets, or it can be screwed or glued to the hood or interior of the vehicle.
- Connect Connector 1 from the Light Switch to Connector 2 leading to the Additional Light Relay.
Frequently Asked Questions (FAQ)
-
Q: Can I install the additional lights myself?
A: Yes, you can install the additional lights yourself by following the installation guide provided. -
Q: Can I connect the additional lights directly to the vehicle battery?
A: No, it is recommended to connect the additional lights to the vehicle battery through the Additional Lights Relay and the 20A Blade Fuse cable. -
Q: Can I use the Light Switch in different positions?
A: Yes, the Light Switch can be installed in various positions such as on the handlebars, hood, or interior of the vehicle. -
Q: Do I need to calibrate the lights after installation?
A: It is recommended to use the possibility of calibrating the lights in an authorized service center for correct angle setting. The manufacturer is not responsible for incorrect use of lights.
INSTALLATION GUIDE AND WIRING DIAGRAM
WARNING! The product is intended for professional installation in a service center, the warranty period does not apply to damages caused by unprofessional installation.
HOMOLOGATION INFORMATION: ECE E4 50R-003070 (front position lamp – white) You can find the definition of norm 50 along with instructions on how to correctly adjust this type of lighting on the official website http://www.unece.org/trans/main/wp29/wp29regs41-60.html correct use by the norm determines the correct angle setting of the lights, we recommend using the possibility of calibrating the lights in an authorized service center. The manufacturer is not responsible for the incorrect use of lights.
INSTALLATION:
- Fasten the ADDITIONAL LIGHTS to the installation site with a screw or the selected sleeve. Connect the wiring from the lights to the connectors designated for it, leading from the ADDITIONAL LIGHTS RELAY. We recommend wiring the additional lights together with the original harness vehicle light wiring.
- Connect the 20A BLADE FUSE cable leading from the ADDITIONAL LIGHTS RELAY to the vehicle battery. The red cable is intended for installation on the plus connector, and the black cable is for installation on the minus connector of the battery.
- Install the LIGHT SWITCH in the selected position. The switch comes with 25 and 22mm sockets for installation on the handlebars or it can be screwed or glued to the hood or to the interior of the vehicle.
- Connect CONNECTOR 1 from LIGHT SWITCH to CONNECTOR 2 leading to ADDITIONAL LIGHT RELAY.
- Connect the piercing end of the WHITE CONNECTING CABLE to the original light wiring or daytime running lights. The connection ensures that the additional lights are turned off when the vehicle’s ignition is turned off and prevents accidental discharge of the battery. The BLUE ALTERNATIVE CONNECTION CABLE with a different end can be used for the same purpose. in the standard installation, the blue cable remains unused. How to use the piercing tip: Unscrew the gray part of the tip. Insert the cable into the inner groove in the grey part of the terminal. Screw the grey part of the terminal to the red part again. ALTERNATE POWER CONNECTOR is used to connect the LIGHTS to the already existing wiring of additional lights. It remains unused during normal installation.
WIRING DIAGRAM
Documents / Resources
|
M-Style BMW R1200GS Adventure Universal Auxilary
Light
[pdf] Installation Guide
BMW R1200GS Adventure Universal Auxilary Light, BMW R1200GS, Adventure
Universal Auxilary Light, Universal Auxilary Light, Auxilary Light, Light
---|---