M-Style Parking AHD Camera with 7 Monitor User Manual

June 15, 2024
M-Style

PARKING AHD CAMERA WITH 7″ MONITORM-Style Parking AHD Camera with 7
Monitor

Diagram

M-Style Parking AHD Camera with 7 Monitor - Diagram

Installation

  1. Connect the camera and the display with an AV cable, see diagram.
    (The front camera needs to be connected to the cable with the label CH 1, rear then to the cable marked CH2).

  2. Yellow power wire – connect to already existing wiring leading from 12V battery on the (+) pole.

  3. Connect the red switching wire to the (+) wire of the existing line so that to be active only after starting the vehicle (connect to the wire up to behind the switch box).

  4. Black wire – connect to(-) pole or ground to ground vehicles.

  5. Green trigger wire – for switching the display to the reverse camera (the reversing camera must be connected to the CH2 cable) – green cable connect to the (+) reverse light cable.

Specifications

| monitor
---|---
Size| | 7″
Resolution| | 1024*600
Signal Format| | PAL/NTSC
Voltage| | DC 12V-36V
Power| | 5W
| camera
Senzor| | AHD
Resolution| | 1920.1080P
Ingress protection| | IP68
Working temperatures| | -20°C-70°C

Package contents

M-Style Parking AHD Camera with 7 Monitor - Package

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals