VAORLO S20 Ear Clip Wireless Headset Instruction Manual

**VAORLO S20 Ear Clip Wireless Headset

**

PRODUCT DIAGRAM

PRODUCT SPECIFICATIONS

Function Operation Instructions

Monaural function

Power on: press and hold the power button for 2 seconds
Shutdown: press and hold the power button for 5 seconds
Volume up: press the power button three times
Next song: double press the power button
Play/pause: Press the power button once
Answer/hang up: Press the power button once
Reject calls: Press and hold the power button for 2 seconds when a call comes in
Siri/Voice Assistant: Press and hold the power button for 2 seconds
Switch language: the phone is not connected when the phone is turned on
Double-click the power button (Chinese and English switching)

Binaural function
Power on: press and hold the power button for 2 seconds
Shutdown: press and hold the power button for 5 seconds
Volume up: triple-click the right ear
Volume down: double-click the left ear three times
Next song: double click on the right ear
Previous song: Double-tap the left ear
Play/pause: Press the power button once
Answer/hang up: Press the power button once
Reject calls: Press and hold the power button for 2 seconds when a call comes in
Siri/Voice Assistant: Press and hold the power button for 2 seconds
Switch language: the phone is not connected when the phone is turned on
Double-click the power button (Chinese and English switching)

Single/double ear intelligent switching function

Single ear use: buy one, regardless of the left and right ears, you can wear it
Binaural use: buy two, both are powered on manually at the same time and are not connected
Three-click any headset before the mobile phone to automatically pair, pair
After success, only one earphone flashes white and green lights alternately.
Unpair both ears: Triple-click any one when disconnecting the BT connection
Unpair the headset (you need to turn off BT when connecting to the mobile phone disconnect)

Indicator flashing indication

Power-on status: white and green lights flash alternately
Power off status: green light flashes 3 times Waiting for pairing: white and green lights flash alternately
Pairing successful: white and green lights off
Charging: the green light is always on
Fully charged: turn off the light after the white light is on for a while
Enter search mode after disconnection: white and green lights flash alternately

Precautions

1. Keep the product away from high temperature, high humidity and corrosive environments.
2. Prevent the product from being hit, dropped, bent, soaking etc.
3. Please do not disassemble the earphone or charging stand.
4. Please do not let this product overcharge all the time, which will reduce the service life of the product.
5. If it causes any discomfort or pain, please stop using this product.
6. Use a DC 5V-1A adapter certified by a regulated manufacturer.
   NOTE: Repeatedly charging and discharging the headset will cause battery performance to degrade over time, which is normal for all rechargeable electronics.

Included in the product package

1. Wireless headset X1
2. USB charging cable X1
3. Chinese and English instruction manual X1

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>