Chongqing S1 Pro Label Printer User Manual

Chongqing S1 Pro Label Printer

Product Information

Specifications:

• Product Name: Label Printer-S1 Pro

• Package Contents:

  • 1 Printer

  • 1 User Manual (warranty card and product certificate
    included)

  • 1 Quick-Start Guide

  • 1 Charging Cable

  • 1 Ordinary White Label Roll (15mm*50mm)

Product Usage Instructions

Label Roll Installation
This printer can only print die-cut labels. Please ensure thatyou use official MakeID labels, otherwise the printer may be damaged or abnormal printing might occur.

1. Push the Cover-Open button to open and put in the label roll as shown in the figure with the printable side facing down.
2. When using a new label roll, pull the transparent leading label out of the Label Exit. The transparent leading label is unprintable.
3. Shut the cover after the label roll is correctly placed. Tear off the transparent leading label before use.

APP Download
Scan the QR code to download the APP directly, or you may go to Google Play or APP store to search for MakeID-LifeAPP to download.

Button Initial Settings

1. After selecting the S1 Pro printer theme, search for it in the APP and click on the searched printer to connect. Please connect the printer in the APP and not through Bluetooth in the phone system settings.
2. Set the Date button as instructed and select your preferred calendar format in the APP. After successful setting, the default date is the current date’s day. You may select the date of 30 days before or after by clicking on the Selection button.
3. Set the Kitchen button as instructed in the APP. Then, click on “Print” to finish the setting before you can print out the label directly.
4. Set the Custom button and the Expiry Date button as instructed in the APP. Then, click on “Print” to finish the setting before you can print out the label directly.
5. After successfully setting all the steps above, you can print out the label directly by clicking on the “Print” button.

Button Usage
Kitchen button / Custom button:

1. Click on the Kitchen button or the Custom button.
2. Click on the Selection button to select the text.
3. Click on the Print button to print out the label.

Date button:

1. Click on the Date button.
2. Select the date of 30 days before or after by clicking on the Selection button. The default date is the current date’s day.
3. Click on the Print button to print out the date label.

Expiry Date button:

1. Click on the Expiry Date button.
2. Click on the Selection button to select the preferred expiry date.
3. Click on the Print button to print out the expiry date label.

How to Use the APP
You could also edit the text in the APP to print after the printer is connected by following the steps above.

1. The printer is powered on and the label roll has been correctly installed, then connect the printer to the phone in the APP.
2. Enter the label-editing page in the APP.
3. Click on…

FAQ:

• Q: Can I use non-MakeID labels with this printer?
  A: No, using non-MakeID labels may damage the printer or result in abnormal printing.

• Q: Where can I download the MakeID-LifeAPP?
  A: You can either scan the QR code provided or search for MakeID-LifeAPP on Google Play or APP store to download.

• Q: How do I connect the printer to the phone?
  A: After selecting the S1 Pro printer theme in the APP, search for it and click on the searched printer to connect. Make sure to connect the printer within the APP and not through Bluetooth in the phone system settings.

• Q: Can I edit the text in the APP before printing?
  A: Yes, you can edit the text in the APP after connecting the printer by following the steps provided.

• Q: How do I install a new label roll?
  A: Open the printer cover, place the label roll with the printable side facing down, pull out the transparent leading label from the Label Exit, and tear it off. Close the cover before use.

• Q: How do I print out a label?
  A: After setting the desired options in the APP, click on the corresponding button (Kitchen, Custom, Date, or Expiry Date) and then click on the Print button to print out the label.

Packaging List

(actual items may vary)

• 1* Printer
• 1* User Manual (warranty card and product certificate included)
• 1* Quick-Start Guide
• 1*Charging Cable
• 1 Ordinary White Label Roll (15mm50mm)

Label Roll Installation

This printer can only print die-cut labels. Please ensure that you use official MakeID labels, otherwise the printer may be damaged or abnormal printing might occur.

• Step 1. Push the Cover-Open button open and put in the label roll as in the direction shown in the figure with the printable side facing down.
• Step 2. When using a new label roll, pull the transparent leading label out of the Label Exit. The transparent leading label is unprintable.
• Step 3. Shut the cover after the label roll is correctly placed. Tear off the transparent leading label before use.

APP Download
Scan the QR code to download the APP directly, or you may go to Google Play or APP store to search for「MakeID-Life」APP to download.

Button Initial Settings

Step 1. This label printer is powered by lithium battery. When the battery power is sufficient, long press the Power button for 2 seconds to light up the screen to power on the printer.

Step 2. For initial use of the printer, connect it to the APP to set the button initialization. Please follow the steps below to do the settings before use.

• a. Open the APP on the phone and allow its all requested permissions. Allowing the permissions is only for searching for and connecting to the printer. It will not violate your privacy.
• b. After selecting the S1 Pro printer theme, search for it. Click on the searched printer and connect. Please connect the printer in the APP. Do not connect it to Bluetooth in the phone system setting.
• c. Set the Date button as instructed and select your preferred calendar format in the APP. After successful setting, the default date is the current date’s day. You may select the date of 30 days before or after by clicking on the Selection button.
• Such a step is required.
• d. Set the Kitchen button as instructed in the APP. Then, click on to finish the setting before you can print out the label directly by clicking on the Print button.
• Such a step is required.‼️
• e. Set the Custom button and the Expiry Date button as instructed in the APP. Then, click on to finish the setting before you can print out the label directly by clicking on the Print button.

Step 3. After successfully setting all the steps above, you can print out the label directly by clicking on the Print button.

Button Usage

Button must be set to be used after the printer is connected in the APP. Kitchen button, Custom button

• Step 1. 1st, click on the Kitchen button or the Custom button.
• Step 2. 2nd, click on the Selection button to select the text.
• Step 3. 3rd, click on the Print button to print out the label.

Date button

• Step 1. 1st, click on the Date button,
• Step 2. 2nd, you may select the date of 30 days before or after by clicking on the Selection button. The  default date is the current date’s day.
• Step 3. 3rd, click on the Print button to print out the date label.

Expiry Date button

• Step 1. 1st , click on the Expiry Date button.
• Step 2. 2nd , click on the Selection button to select preferred expiry date.
• Step 3. 3rd, click on the Print button to print out the expiry date label.

How to Use the APP

• You could also edit the text in the APP to print after the printer is connected by following the steps above.

  • Step 1. 1st, the printer is powered on and the label roll has been correctly installed, then connect the printer to the phone in the APP.
  • Step 2. 2nd, enter the label-editing page in the APP.
  • Step 3. 3rd, click on to edit the text, and to change fonts or resize text.
  • Step 4. 4th, click on to insert stickers or icons.
  • Step 5. 5th, click on to enter the print preview page where you could set print copies.
  • Step 6. 6th, Tear off the label from the label exit after printing.
    To prevent causing any potential damage to the label and the printer, do not attempt to tear off the label while the printer is operating.

How to Stick the Label
Each label comes with an adhesive on the backside. Tear off the backing paper before sticking it onto any object surfaces.

Charging Method

The printer is powered by lithium battery with a Type-C input port of 5v=2A charging input; Please use the Type-C charging cable that comes with the printer. Charge the printer by using a standard Type-C charging head; If the printer is left unused for a long period, please charge once every 3 months in case the lithium battery cannot be recharged due to natural wear and tear over time.

Printer Parameter

• Printing Method Thermal Printing
• Printing Resolution 203dpi
• Supported Label Type Die-cut
• Label Label Tearing Method Manually
• Printing Width 12mm
• Compatible Label Width 9-12mm wide；7.4m long
• Printer Size 85.5mm85.5mm33mm
• Package Size 117mm117m m43mm
• Battery Capacity 3.7v/1450mAh
• Battery Life 90 days
• Connection Method Bluetooth connection/ Shortcut button panel operation

Safety Notes
Your personal safety is very important in the operation and maintenance of the product. This manual includes warnings and precautions for safe operation. Please read carefully and understand all warnings and precautions before use. Do not attempt to repair or adjust the product yourself. If you still fail to fix the troubles according to the suggested methods described in this manual, please power off the product and contact us at jryx@jingjingfun.com for further assistance.

Precautions

1. Do not use the printer for any use or purpose other than those described in this manual, as that may cause accidents or damage to the product.
2. Only MakeID official labels can be used for this printer. Thus, please do not use other branded labels as the replacement, as this may cause damage to the printhead and shorten its life. damage to the printhead caused by the use of poor-quality labels are not covered by the warranty.
3. Do not touch the printhead to prevent static electricity from causing damage to sensitive components. If the printhead gets dirty, please clean it with anhydrous alcohol.
4. Do not scratch the printhead with hard objects. damage to the printhead caused by improper maintenance or use are not covered by the warranty.
5. Do not place any foreign objects outside the label exit, as this may cause damage to the printer.
6. Do not press or hit the printer, as this may cause damage to the components or the printer to malfunction.
7. If the printer is soaked in water or damaged, stop using it immediately.
8. The printer should be kept away from direct sunlight or the rain, heaters and other heat-generating devices, dashboards, the rear of the cars, nor exposed to extremely high or low temperatures, high humidity, or dusty areas. The standard operating temperature range is from 5°C to 35°C;
9. If there is a large temperature difference between indoors and outdoors, it is not recommended to use the printer immediately when it is taken from outdoors to indoors. It needs to be left to stand for a period of time to ensure that the printer is frost-free before use;
10. Do not stick the label where your hands often touch. Sweat and friction will make the printings fade.
11. Do not leave the labels in contact with chemical liquids, such as hand sanitizer, laundry detergent, detergent, alcohol, etc. for a long period, otherwise, it will affect the preservation time.
12. Do not wipe the labels with any cleaning tools that contain alcohol.
13. Thermal inkless printing is a special printing technology. The printings might fade if it is improperly used. We recommend sticking the label in room temperature in dry, flat, and infrequently touched places.
14. To prevent labels from jamming due to multiple printings, please remove and tear off the label at the label exit after each printing task is finished.
15. Do not disassemble the printer to avoid possible electrocution, mechanical injury, or causing damage to the printer components and other accidents. 16. Power off the printer immediately to avoid burns if the printer shows abnormalities such as emitting smoke or odor, etc.
16. To prevent unexpected situations, do not force to open the cover to remove the label roll when the printer is operating.
17. Do not touch the printhead to avoid burns because the printhead is still in a high-temperature state after the printings have just finished.
18. As the printhead is a precision component, and to better protect the printhead and extend its life, it is recommended: a.Not to print more than 2 meters for each continuous printing. b.Not to print more than a total length of 20 meters per day.
19. Due to the structural reason, the printhead is a fragile component, please pay attention to the following notes to avoid corrosion.
    • a. Do not touch the printhead surface.
    • b. Do not use carbon ribbons or thermal labels that contain sodium, potassium, or chloride ions.
    • c. Printhead should be avoided contact with any liquids or wet objects.
    • d. Printhead can be only cleaned with anhydrous alcohol.

Troubleshooting

Please contact us at: jryx@jingjingfun.com

Warranty Policy

Warranty Period
MakeID will provide you with free limited liability repair or product replacement services for 1 year from the date of purchase of this product in the event of a hardware failure on the condition that you have installed and used this product in full accordance with the normal working conditions and methods specified in this user manual.

Kind Reminder

1. Documents such as user manual, guide card, and all cables such as the charging cable, etc that come with the product are not covered by the warranty.
2. Discounted or complimentary items that come with the product are not covered by the warranty.
3. Order number, contact information and delivery details which shall include your name, phone number and full address are needed for after-sale services of your product due to quality or function issues within the warranty period.

Ineligibility for the Warranty Service
Malfunctions or damage of this product belonging to the following situations are not covered by the free warranty, please choose paid repair service:

1. The product or its components exceed the warranty period.
2. Failure to install and use in accordance with the manual.
3. Repaired or disassembled by non-MakeID staff.
4. Non-MakeID labels or unsupported print media are used.
5. The operating environment does not conform to the conditions specified in the manual.
6. Substandard packaging or transportation methods are used by users during the transportation and handling of the product.
7. Non-MakeID components are used.
8. Malfunctions or damage due to force majeure such as man-made or natural disasters (e.g. earthquake, fire, etc.)
9. Other malfunctions or damage that is not caused by product quality issues.

This policy does not affect your legal rights as a consumer.

Under the environment with Electrostatic Discharge Test Results the sample may be disconnected, but it can be resumed to normal operation by user after test.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>