BODEGA TWW35 12 Volt Refrigerator User Manual

BODEGA TWW35 12 Volt Refrigerator

PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY RETAIN THIS MANUAL FOR FUTURE REFERENCE

Quick Guidelines

This icon marks references to other pages in this manual.

( )Left Chamber’s Temperature
( )Right Chamber’s Temperature
( )Input Voltage
( )Bluetooth

First Step: connect with 12/24V DC or 100~240V AC (with adapter) power.
Second Step: press” “button to switch ON/OFF.
Third Step: press” + ” or” – “to adjust temperature.
Cooling Mode: press “ ” to switch cooling mode between MAX (fast cooling) and ECO (Economical).
(Economical mode)

(Fast cooling mode)

Battery Protection Mode: hold “ ” over 3 seconds until screen flashes, then press “ ” again to select battery protection mode
Temperature Unit Setting: default setting is centigrade 0 C. If you want to change to Fahrenheit °F, please refer to page 6.
(Centigrate)

(Fahrenheit)

Safety Instructions

To prevent damage to your product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them.

This icon marks warnings. Failure to obey these warnings could result in malfunction of your fridge and possible injury for yourself and other users.

• Do not expose your fridge to heat and direct sunlight .
• Do not place in humid places to avoid leakage or electric shock.
• Do not put any electrical devices inside the fridge as they could damage the fridge .
• Do not soak the fridge into water or expose it to rain.
• Do not upside down for drainage
• Do not block the gaps of the fridge with things like pin, wire, etc .
• Do not allow children to play on or in fridge .
• Do not use the fridge if abnormalities are noticed such as smoke, overheating, leakage etc.
• Do not let other technicians to repaired the malfunctional fridge, except the staff from our company.

Notices

• Use wet cloth to clean your fridge before use .
• Make sure the voltage is within the proper range for the socket and cable being used .
• The fridge should be unpacked and stand still for more than 6 hours before switching on the power
• Make sure the refrigerator stays horizontally when it is working. The tilt angle should be less than 5° in long run and be less than 45° in short run.
• The fridge needs some space for good ventilation to work properly, at lease 200mm at the back and 100mm at side.
• The installation of the DC power source in a boat should be handled by qualified technician.
• Please contact us for maintenance if your fridge gets malfunctional.

Product Features

• High efficiency DC compressor and module which is robust and durable .
• Fast cooling to -20°C/-4° F (based on 25°C/77° F room temperature) .
• 3-stage low voltage battery protection.
• CFC free and low energy consumption .
• DC12V/24Vor AC 100~240V (with adapter) power supply .
• Robust wheels and stretchable handle
• Invertible door for installation
• Dual-zone for cooling and freezing .
• LED display for temperature setting .
• APP control via Bluetooth

Product Structure

Function and Setting

• Display Screen Initialization: Connecting with electricity, the buzzer rings and the display screen lights up for 2 seconds, being into normal operation mode.
  

• Power Supply: Can be connected with DC 12124V or AC 100~240V<with adapter).

• Power On/Off: press” “button to switch ON/OFF.

• Temperature Setting: under the running state, long press+ and at the same time for three seconds to switch ON/OFF the left compartment, long press – and at the same time for three seconds to switch ON/OFF the right compartment, two compartments cannot be switched off at the same time.
  When both left and right compartments are set in running state, press + or – to enter left compartment temperature setting, press+ to increase temperature, press- to decrease temperature, and press to switch left/right compartment. The setting will be saved after stop operating for four seconds(Note: the temperature displayed is the current temperature of the compartments, it’ II take a while to reach the set temperature.)
  Temperature setting range: -20~20°C (-4~68°F)

• Cooling Mode Control: Press the button “ ” to select cooling mode. You can switch mode between MAX (Quick cooling mode} and ECO (Economical mode).

• Battery Protection Mode: Hold the button “ ” over 3 seconds, the LCD screen will flash, then you can select L(Low), M (Medium), H (High) mode for your battery protection. The default setting is H mode. When the fridge is powered by car battery, it is recommended to set H mode. When the fridge is powered by built-in battery or portable battery, it is advised to set M or L protection mode. The reason is that various cars have different output voltage. If battery protection occurs (screen displays Fl), the protection mode should be adjusted from H to M or L. When the engine is switched off, the fridge is still able to work.
  Protection mode should be set to H to prevent car battery from exhaustion.

• Temperature Unit Setting: press “ ” switch off the fridge, then press “ ” over 3 seconds until El shows on the screen. Press “O” from El, E2 …… switching to ES. When the screen flashes, press “+ ” or ” – ” to change the unit between Centigrade (0 C) and Fahrenheit (°F).

• Reset: Power off the fridge, holding the setting button “ ” until El is displayed on the screen. Hold the button “+ ” and ” – ” until the screen lights up as follow:
  

Operating Panel& APP

APP Connecting Operation : Please scan the corresponding QR code shown as below to download the APP “Car Fridge Freezer” from App Store or Google Play, then open the Bluetooth and the downloaded APP to search the fridge equipment, you will hear “Tick” sound, meanwhile there will be “AP” shown on the fridge display panel.

Notice: the Bluetooth and location authority should be allowed so that the refrigerator can be searched.
Press the setting button O on the fridge to connect your mobile.
By connecting the smart car refrigerator through the APP, you can check the temperature of the refrigerator, voltage and other information, as well as setting the temperature and cooling mode, etc.

|
---|---

FOR IOS

|

FOR ANDROID

Cleaning and Storage

Cleaning:

1. Please unplug the fridge first to avoid electric shock. drain hole
2. Do not soak the fridge in water and do not wash it.
3. Remove the cover and drain from the hole.
4. Use wet cloth to clean the fridge and dry it.
   

If you do not use the refrigerator for a long time, please follow the instruction:

1. Turn off the power and remove the plug.
2. Remove the items stored in the refrigerator.
3. Absorb all the water in fridge with dry cloth.
4. Place the fridge in a cool and dry place.

Troubleshooting

• Check if power supply is malfunctioned or not.
• Check whether the plug and socket are connected well.
• Check whether the fuse has been burnt or not.
• Check if the switch is on or not.

Food is frozen| The setting temperature is too low| Increase the setting temperature
Water flowing sound is inside the refrigerator| It is a normal phenomenon.| It is the flowing sound of refrigerant which is normal.
There are water drop around the refrigerator casing or door gap| It is a normal phenomenon.| When moisture in the air meets the lower temperature refrigerator casing, it will naturally become liquefied  and condensed to be water drops. That is a normal phenomenon.
The compressor is slightly noisy when starting| It is a normal phenomenon.| The noise will be less after the compressor works stably.
Code Fl displayed| This is protection mode of low car voltage| Set the battery protection button from H to M or from M to L
Code F2 displayed| This is the protection mode of overloaded fan| Turn the refrigerator off and restart it after 30mins.
Code F3 displayed| This is the protection mode of frequent working compressor.| Turn the refrigerator off and restart it after 30mins.
Code F4 displayed| It means  compressor is overloaded or working at a low speed.| Turn the refrigerator off and restart it after 30mins.
Code FS displayed| This is the protection code of overheated compressor module.| Move the refrigerator to a ventilated area, turn it off and restart it after 30mins
Code F6 displayed| No parameter can be detected by the controller.| Please restart it. If the code shows again, please contact with after-sale workers.
Code F7 or F8 displayed| This is the erroneous protection code of temperature sensor.| **** Please check the sensor terminal.

Technical Data

*Due to product improvement, the technical data might be different from actual data, please refer to the rated label on the product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>