ZEBRONICS ZEB BT6592RUCF 5.1 Speaker User Manual
- June 4, 2024
- ZEBRONICS
Table of Contents
ZEB
5.1 Speaker
BT6592RUCF
User Manual
ZEB BT6592RUCF 5.1 Speaker
Thank you for purchasing the ZEB-BT6592RUCF 5.1 Speaker. Please read this
user manual carefully and keep it for future reference.
Warning
CAUTION!
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE THE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
-
To prevent fire or electric shock do not expose the unit to rain or moisture.
Note: This product is for indoor use only. -
Refer servicing to qualified personnel only.
The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user of the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the manual accompanying the product.
IMPORTANT SAFETY INSTRUCTIONS
- Read these instructions before using the product.
- Read all the warnings carefully.
- Follow all instructions carefully.
- Do not use this unit near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install the speaker system near any heat sources such as radiators, heat registers, stoves, or other units (including amplifiers) that produce heat.
- Protect the power cord from being walked on or pinched particularly at plug points and the point where they exit from the unit.
- Only use attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the unit. When a cart is used, be cautious while moving the cart/unit combination to avoid injury from tip-over.
- Unplug this unit during lightning storms or when unused for a long period of time. Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the unit, the unit has been exposed to rain or moisture, does not operate normally, or has been dropped.
Package Contents
Subwoofer:
Satellite:
Remote control:
Input cable:
Antenna cable-
Wallmountfasteners :
StereotoRCAadapter :
QR Code Guide –| 1U
5U
1U
1U
1U
1U
1U
1U
---|---
How to use the BT:
- select the audio input to BT mode
- Search BT device with the name “ZEB- BT6592RUCF”
- connect the BT
- if your BT device is below the 5.0 version, input password “0000” when connecting.
Product Representation
Front Panel
INPUT: Input function key.
5.1/2.1:5.1 /2.1 function key.
STANDBY/ /AUTO: Stand by function by pressing it 3 secs in AUX/USB/SD/FM
mode; Play/Pause in USB/SD mode; Automatic FM radio search by pressing 3 secs.
VOL- / / CH-: Turn down the volume; Previous track in USB/SD/BT mode;
Previous saved channel in FM mode.
VOL+ / /CH-I: Turn up the volume; Next track in USB/SD/BT mode; Next
saved channel in FM mode.
SD / M MC CARD: SD card slot.
U DISK: USB slot.
Important Notes
- Make sure that the power supply is proper and never handle the power cord or its plug with wet hands when plugging into, or unplugging from a plug-point.
- Ensure that the main power switch is in the “OFF” position before connecting the AC power cord to the power supply to avoid damage to the unit.
- A damaged power cord can easily cause an electric shock or fire; Never use a power cord after it has been damaged.
Battery Installation
Remote Control
Power switch button (Standby) switch On or off
USB USB input
SD SD Input
FM FM Radio
AUX AUX Input BT BT Input
DVD AC-3 input for 5.1 mode audio source.
EQ Equalizer preset
** Play & pause
Previous track when USB/SD/BT Input
CH – Previous Channel When FM Input
►► Next track when USB/SD/BT Input| CH+ Next Channel When FM Input
VOL -/+ Master Volume
DISP -/+ Lightness Adjust
REPEAT Repeat Mode
TUNE -/+ Previous/Next Channel Keep Pressing to search the channel
AUTO Press and Hold for 2-3 sec to begin FM auto scan
SAVE Save FM Channel
RESET When the Volume is at The Maximum, Press the “RESET” Button at The
Status While Power On
MUTE** Mute
---|---
5.1/2.1 5.1/2.1 mode.
SW -/+ To calibrate the woofer sound level.
FL -/+ To calibrate the front left speaker level.
FR -/+ To calibrate the front right speaker level.
CEN -/+ To calibrate the center level.
SL -I+ To calibrate the surrounding left levels.
SR -/+ To calibrate the surround right sound levels.
SLEEP -/+ Time choice 0/10/20/30/45/60/90/120.
Input connectivity
Note: Insert the plugs fully into the jacks. Loose connections may
produce noise interference.
Output connectivity
SPEAKER TERMINALS Connect front speakers, center speakers, and surround speakers to 5.1 speaker output terminals.
- The front speaker’s cords to the FRONT SPEAKERS terminals
- The center speaker’s cords to the CENTER SPEAKERS terminals
- The surround speaker’s cords to the SURROUND SPEAKER terminals
Note: Do not leave objects generating magnetism near the speakers.
Unit Operation
-
First plug the cable of all the satellites into the output jack on the rear panel of the woofer, one end of the audio cord into the input jack on the rear panel, and the other end into the output jack of the computer or any external audio source, the power cord into the power plug socket. Then switch on the unit, and the LED will be in the blinking state in the front panel, when the standby button is pressed the unit lights up.
-
Pressing the VOL + and VOL – keys will enable the volume levels to be increased & decreased.
-
When the 5.1/2.1 button is pressed, it plays back the track from stereo to 5.1 channel in all modes which is indicated through the blue lead for the selected mode.
-
When in FM mode, press and hold the
PLAY/PAUSE button in the front panel of the woofer or the AUTO button on the remote for 2-3 seconds the automatic scanning will proceed, and once after scanning it will playback the first channel of the full scan done. -
When inserted a USB or SD/MMC card, it will play from the device last inserted, the input mode will be changed to SD or USB on the display and starts playing from the beginning or auto resumed from the track of the last time playback.
-
When USB or SD/MMC card is working, press the PLAY/PAUSE button to pause the music, and press the PLAY/PAUSE button again to resume music.
-
When USB or SD/MMC card is playing, press the MODE button to cycle through the LINE IN, USB, FM, and BT modes.
-
When USB or SD/MMC card is working, press the PREVIOUS and NEXT buttons to choose the previous or the next audio track
-
After stopping using the unit, Use the standby button to turn off the unit, switch off the power switch, and unplug the power cord.
Specification
Output power (RMS)
Subwoofer
Satellites
Total
Driver size Subwoofer
Satellites
Impedance Subwoofer
Satellite
Frequency response
S/N Ratio
Separation File format support (USB/SD)
Line input| : 40 Watts
: 6 Watts x 5
: 70 watts.10.16cm
: 6.98cm x 5
: 4Ω
: 4Ω
: 40Hz – 20kHz
: Z75dB . 50dB
: MP3/WMA/WAV/FLAC /APE
: 2ch RCA, AC-3
---|---
Max. supported
USB/SD memory size
FM frequency scan range
BT name BT version
Product dimension (WxDxH)
Subwoofer
Satellite
Net. weight
Subwoofer
Satellite
Total| : 128GB
: 87.5MHz-108MHz
: ZEB-BT6592RUCF
: 5.0 + EDR x D x H)
: 140 X 282 X 258 mm
: 90 x 70 x 130 mm
: 2.96kg
: 310gx 5
: 4.51 kg
---|---
Features
5.1 channel speaker
Wireless BT/USB/SD/FM/AUX/AC-3
LED display
Stylish design 10.16cm subwoofer
Remote control
Subwoofer LED On/off Function
ISO 9001:2015 Certified Company
www.zebronics.com
Documents / Resources
|
ZEBRONICS ZEB BT6592RUCF 5.1
Speaker
[pdf] User Manual
ZEB BT6592RUCF 5.1 Speaker, ZEB BT6592RUCF, BT6592RUCF, 5.1 Speaker, Speaker
---|---