DIRECTV SWM-30 High Power Reverse Band Capable Satellite Multiswitch Installation Guide
- June 15, 2024
- DirecTV
Table of Contents
DIRECTV SWM-30 High Power Reverse Band Capable Satellite Multiswitch
Product Information
Specifications
- Model: SWM-30
- Input Frequency Range: 18-806 MHz
- Output Frequency Range: 950-2150 MHz
- Power Output: 13V, 500mA
- Supported Satellite Lines: 99/101, 103/110/119, 95/99RB/103RB
- Power Requirements: 18V
- Compatibility: DIRECTV
Product Usage Instructions
Installation
To install the SWM-30 module, follow the steps below:
- Ensure that the SWM module is stand-alone and not connected to any other devices.
- Connect the SWM module to your router using an Ethernet cable.
- Connect the SWM module to your DIRECTV receiver (IRD) using the provided cables. The connections should be made as follows:
- SWM1 to IRD
- SWM2 to IRD
- PWR to SWM
- Connect the power adapter to the SWM module and plug it into a power outlet.
**Satellite Dish Connection
**
The satellite dish lines must be connected to the SWM module. Follow these steps:
- Locate the satellite dish lines (not shown in the manual).
- Connect the satellite dish lines to the SWM module. The connections should be made as follows:
- SAT-DC IN to satellite dish lines
- SAT-DC OUT to satellite dish lines
- SAT-DC OUT to satellite dish lines
- SAT-DC OUT to satellite dish lines
Power Menu and Selection
After the installation is complete, you can use the power menu and select guide for further configuration. Follow these steps:
- On your DIRECTV receiver, navigate to the power menu.
- Select the guide option from the power menu.
FAQ (Frequently Asked Questions)
- Q: What is the power output of the SWM-30 module?
- A: The SWM-30 module has a power output of 13V, 500mA.
- Q: What are the supported satellite lines for the SWM-30 module?
- A: The supported satellite lines for the SWM-30 module are 99/101, 103/110/119, and 95/99RB/103RB.
- Q: How do I connect the SWM module to my router?
- A: To connect the SWM module to your router, use an Ethernet cable to establish the connection.
- Q: What is the power requirement for the SWM-30 module?
- A: The SWM-30 module requires a power input of 18V.
- Q: How do I access the power menu and select guide on my DIRECTV receiver?
- A: To access the power menu and select guide on your DIRECTV receiver, navigate to the power menu and select the guide option.
- Q: What is the warranty period for the SWM-30 module?
- A: The warranty period for the SWM-30 module is until September 2023.
INSTALLATION
DIPLEXING SWM-30 OUTPUTS
©2023 SIGNAL GROUP, LLC. REPRODUCTION IS PERMITTED SO LONG AS ALL BRANDING AND COPYRIGHT INFORMATION IS RETAINED.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>