FSR DV-HMSW4K-44AUD HDMI 4K Matrix Switcher Instruction Manual

FSR DV-HMSW4K-44AUD HDMI 4K Matrix Switcher Instruction Manual

Operating Instructions

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

SURGE PROTECTION DEVICE RECOMMENDED

This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.

Dear Customer

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating, or adjusting this product.
Please keep this manual for future reference.

Features

• HDMI 2.0 version ( Supports 4 K@60 Hz YUV4:4:4)
• Bandwidth up to 18Gbps
• HDCP1.4/2.2 compliant
• Supports HDR10, HLG, Dolby vision
• 4 xHDMI Input, 4 xHDMI output with 4 xSPDIF coaxial Audio, and 4 x Analog Audio
• Any one of the 4 Ultra HD sources to any one of the 4 Ultra HD displays
• Supports IR control for long distance; RS232 control, Panel Button control, TCP/ IP control and Web GUI Control
• Supports PCM 2.0, Dolby True HD and DTS-HD master audio, LPCM 7.1, audio
• Sampling rate up to 192 KHZ.
• Supports analog and S/PDIF audio extraction
• Supports EDID management and EDID copy
• Supports firmware updating through RS232 port.

Package Contents

1. 1x HDMI Matrix
2. 1x 12V/2A DC power supply
3. 1x Remote control
4. 1x IR Ext RX Cable
5. 5x Screw terminal plugs for RS232 cable termination & L/R Audio termination.
6. 1x CD for control software & user manual

Specifications

Panel Descriptions

Front panel

1. IR receive window.
2. Output 1-4: short press will select one output, press again to cancel; long press will select all outputs, long press again to cancel.
3. Input 1-4: short press will select one input if an output is already selected; a long press will select one input for all output.
4. PRESET: short press for preset
5. UP: short press for up
6. LOCK: long press to lock, long press again to unlock, all but the lock button is deactivated when locked.
7. MENU: press for the main menu interface or return to the previous menu interface.
8. DOWN: short press for down
9. ENTER: short press to confirm
10.  LCD screen

Note: Unit will exit the menu interface will return to audio channel interface automatically 30s after last button press; after 60s without a button press the LCD screen will turn off.

Rear panel:

1. Analog audio out
2. S/PDIF audio out
3. RS232 for control
4. IR-Ext
5. Ethernet port
6. DC12V/2A input.
7. HDMI output port.
8. HDMI input port.

Connecting and Operating

1. Connect source devices to input ports of the matrix
2. Connect HDMI output ports to TV or other HDMI sink devices.
3. Optional: connect RS232 cable from PC RS232 port.
4. Optional: connect an Ethernet cable from the TCP/IP port on the matrix to a local area network.
5. Connect 12V POWER supply to DC power socket.
6. Power on the matrix, HDMI sources and displays.

Application Diagram

Remote Control Description

1. Power on/Standby.

2. M: Turn off the HDMI output audio

3. W: Lock remote control

4. Output 1-4

5. All outputs select INPUT-Y:
   a. Press the ALL button.
   b. Press INPUT-Y button (Y means 1 to 4 of the inputs),then INPUT-Y switched to ALL OUTPUTS.

6. Turn off output channel.

7. PTP button: Mirror all inputs and outputs (Ex. Input 1 to output 1, input 2 to output 2, etc.)

8. Input 1-4 (press output-X then Input-Y):

9. Switching input left and right.

10. Up and down, left and right

Note: All buttons use short button presses.

• Power on/standby: in standby the LCD screen will show “System Shutdown”, 5V on the HDMI output will be disconnected and the display with have no image.
• Video switch: output + input (e.g., output1+input2, switches output1 to input1)
• Turn off HDMI output audio: output + M (e.g., output1+M, turns off output1 audio)
• Lock remote control: short press “W” to lock, short press again to unlock.
• Turn off output channel: output + “X” (eg: Output1 + X, output1 turns to black screen, output + X again to return to normal)
• Switching input left and right: output + <(>)；(e.g., All + < ,TV image will change according to the next input, it will skip inputs with no signal).

Panel Control Description

Video switch operation:

For example：

1. Switch output 1 to input 4.
   Operation: press output1+input4 to complete switch

2. Output 1, 2, 3 switch to input 2.
   Operation: press output 1, 2, 3 + input 2 to complete switch

3. All output switches to input 4.
   Operation: long press input 4 to complete switch

Note: to quickly (< 10s) switch between inputs press the output + input to switch, then the input button can be press repeatedly without then need to press the output again
Video control:
There are 2 sub-menus in video interface: 1. Switching; 2. On/Off

Video switching
Operation:

1. Select “Video” in the main menu, press the “ENTER” button.
2. press “up and down” button to choose “Switching”.
3. press “ENTER “to enter the next sub-menu.
4. press the “up and down” button to select “Output1~4“, (“All” means all output, “Switching”), the bottom color of the selected output turns to white
5. press “ENTER” to enter the next sub-menu.
6. press the “up and down” button to select input, the bottom color of the selected input turns to white.
7. press “ENTER “button to complete video switching.

Output switch control
You can open/close any output port, or open/close all output ports. Video outputs are defaulted to open.

1. In the main menu, select “Video” and press “ENTER” button.
2. press “up and down” button to select “On/Off”
3. press the “ENTER” button to enter the next sub-menu.
4. press “up and down” button to select “output1-4” (All means all outputs), the bottom color of the selected output turns to white.
5. press “ENTER” to enter the next sub-menu.
6. select Output-HDMI1~4, press “ENTER” button to enter the next sub-menu.
7. press the “up and down” button to select Off or On
8. Press the “ENTER” button to confirm that the output port is open/closed.

Audio control interface
There are 2 sub-menus in audio control interface: Line out, De-Embed (both are defaulted to open)

Switch output audio
“Line out” mute/unmute HDMI embedded output audio on any one or all output channels.
Operation：

1. select “Audio” in the main menu and press the “ENTER” button.
2. Press “up and down” button to select “Line out”, press the “ENTER” button, the bottom color of the selected turns to white. Select output 1-4 or “ALL” via pressing the up and down buttons, press “ENTER” button to choose “on” or “off “.
3. e.g., mute sound of the TV connected to HDMI output1, operation: “Audio” + “ENTER” + “Line out” + “Output1-HDMI1” + “Off”, will return to upper-menu after “ENTER”.

Audio extraction control:
“De -Embed” enables the output audio (for both analog and SPDIF audio) on one or all output channels.
Operation：

1. select “Audio” in main menu and press “ENTER” button.
2. Press “up and down” button to select “De -Embed”, press “ENTER” button, the bottom color of the selected turns to white, Able to select output1-4 and all via pressing “up and down” button, press “ENTER” button to choose ”on” and “off “
3. e.g., turn off audio extraction of HDMI output1, operation: “Audio” + “ENTER” + “De – Embed” + “Output1” + “Off”, will return to upper-menu after “ENTER”.

EDID setting interface:
EDID management: User EDID, build-in EDID, Copy EDID mode.
The default EDID is “Default1”

Default1| 4K60 444-LPCM: 2.0, HDR: HLG| Default2| 4K60 420-LPCM: 2.0, HDR: None
---|---|---|---
Default3| 4K30 444-LPCM: 2.0, HDR: None| Default4| 1080P60 444-LPCM: 2.0, HDR: None

Example: switch default1 to output1:
Operation：

1. select “EDID” in main menu and press “ENTER” button
2. press “up and down” button to select “Input 1” (“All” means all input)
3. press “ENTER” button to enter the next sub-menu.
4. press “up and down” button to select “Default1”, the bottom color of the selected turns to white, press “ENTER” to complete setting.
5. behind the selected EDID, it will show the max supported resolution, audio format and audio channel.

Preset application
Preset interface can save the current video, audio, EDID, system setting, etc…
Supports 8 different presets, can execute a preset through the web, command, panel button, and recall.
Preset control interface has three sub-menus:
Call scene
Save scene
Clear scene
Operation：

1. select “Preset” in main menu and short press “ENTER” button to enter preset interface; call, save and clear preset.
2. save preset: select Save- > anyone of Preset1~8- >ENTER.
3. call preset: Call- >any of the saved Preset1~8- >ENTER.
4. clear preset: Clear- >any of the saved Preset1~8- >ENTER (the saved preset will return to the default).

Setup Interface
The setup interface can set serial port baud rate, DHCP switch, device reboot and factory reset.

Baud rate setting
The options for the baud rate setting are: 9600,19200, 57600, 115200.
The default serial port is 115200.
Below example is setting baud rate to 9600.
Operation：

1. select “Setup” in the main menu and press “ENTER” button.
2. press the “up and down” buttons to select “Baud”
3. press “ENTER” to enter the next sub-menu.
4. press “up and down” button to select “9600”
5. press “ENTER” to complete setting the new Baud Rate

DHCP Switch
DHCP On: dynamic IP address; DHCP Off: static IP address (default is DHCP off)
DHCP Operation:

1. select “Setup” in the main menu and press the “ENTER” button.
2. press “up and down” buttons to select “DHCP” setting.
3. press “ENTER” to enter the next sub-menu.
4. press “up and down” buttons to select “On”.
5. press “ENTER” to open DHCP to allocate IP address automatically.

Reboot
Reboot device, default is “NO”.
Operation：

1. select “Setup” in the main menu and press “ENTER” button.
2. press “up and down” button to select “Reboot”.
3. press “ENTER” to enter the next sub-menu.
4. press “up and down” button to select “Yes”.
5. press “ENTER” to complete reboot device.

Factory Reset
reinitializing the setting for the device (default is “NO”). There are two factory settings:

1. Factory Common: factory reset for video switch, EDID, audio and setting (IP address will not be factory rest)
2. Factory All: factory set for video switch, EDID, audio, setting, preset and device name.

Factory Reset Operation:

1. select “Setup” in the main menu and press “ENTER” button.
2. press “up and down“ button to select “Factory”.
3. press “ENTER” to enter the next sub-menu.
4. press “up and down” button to select “ALL” and press “ENTER” button.
5. press “up and down” button to select “Yes” and press “ENTER” button.

Query information interface
Query IP and system information.
System interface query; company name, device name and version information IP interface query device IP address, MAC address and DHCP status.
Operation：

1. select “INFO” In main menu and press “ENTER” button.
2. press “up and down” button to select “System” or “IP”, bottom color will turn white when selected.
3. press “ENTER” to enter the next sub-menu, then able to query device information.

RS232 Control

Open Comm  Uart Assistant.
Comport setting:
Choose correct COM port that connects to PC in parameter configuration area

Enter Port Command in Send options.

Command List

1. All commands start with “#”
2. The “_” underline cannot be omitted.
3. Command header, Parameter and target need to have one “SPACE”.

The following table is only an example. Please refer to the list of instructions.

will feedback all open command format fields
Example1| #cmd
Search all open command

Web Control

Change IP address of PC
Before configuring the device through the webpage, it is necessary to configure the IP address of the computer with the device (mainly to ensure that the computer and the device are set in the same network segment).

1. Open the network control center and set the computer’s IP address：
2. Choose to use Static IP, with the IP address set to 196. 168. 1.x (x ranges from 0 to 254, but cannot be consistent with the device’s IP address),
3. Subnet mask set to 255.255.255.0
4. Gateway set to 192.168.1.1

Login by Browser
Default IP address for log-in:192.168.1.168
Type in user name and password (default user name: admin; default password:123456)
Note: suggest the use of a newer version of Google,firefox,IE11 browser for better compatibility.

Video interface:

1. Output: 01 >> 02, 01 means input, 02 means output, “All” means all output Operation steps:
   Click 01 >> 01 or All, then click input 01~04。eg：switching input1 to output 4；
   Click ”04 >> 04” first, then click”01”.

2. Input: 01~04 means HDMI input 1~4.

3. OFF: close output channel, click “OFF” to close output channel; Click “ON” to close this function. The default is “OFF.”

4. Store: preset1~preset8. Recall: call the preset;
   Save: save the preset Operation steps:
   a. Call preset： preset1 + Recall, call preset1.
   b. Save preset： preset2 + Recall, save preset2.

Modify Port Name：

1. Click to choose the input or output port, rename in input box, then click Save & Exit.
2. Click to choose preset, rename in input box, then click Save & Exit. Note: Rename limit:1~15 letters / numbers / underline.

Audio Interface

1. Click output1-4 HDMI turn off HDMI output audio.
   Operation: e.g.: turn off audio of the TV which connected to HDMI output1 Click output1 HDMI, color will change and TV only with video but no audio.
   Re-click to turn on audio.

2. Click output 1-4 De-Embed turn off audio extraction function, also turn off SPDIF and analog audio at the same time.
   Operation：e.g.: turn off HDMI output1 audio extraction
   Click output1 De-Embed, color will change and no audio for analog and SPDIF out. Re-click to turn on audio.

EDID Interface

1. Input: 00>>Input1, 00~16: EDID number, Input1~4: HDMI input1~4
2. Output: 00~03:default EDID, 04~07: user EDID, 08~11: copy EDID, 12~15: input EDID, 16: Temp EDID, refer to below for more details:

support power-off memory

1. EDID Information: show EDID here: click “00>>Input1 “or “00: Default1“, will show resolution, audio, audio channel, HDR and serial number.

2. Edit User EDID: Click “Edit User EDID”, choose default, user, copy, input EDID on “EDID Edit
   Page” to save to User1-4, supports power-off memory.
   Operation：

3. HDMI input1 use second default EDID ；click”00>>Input1”, then click ”01: Default2”.

4. Save copy HDMI out1 to User1: choose”default1”in “EDID Edit Page”, then choose “User1” and click “Set” to finish.

Network Interface
MAC address cannot be modified, for display only.
Static IP: Click DHCP switch(DHCP Off),you can modify IP address, then click “Apply”
button, it will countdown. If device IP address same as client IP, will re- login web interface.
If unable to refresh automatically, then need to resubmit form manually.
Dynamic IP: Click DHCP switch(DHCP On),IP address assigned by router and turn to grey, cannot be modified, but can display current IP address information.
IP address/Net Mask address/Gate Way address can be modified only when DHCP Off, can’t be modified when DHCP ON
Default IP address:192.168.1.168

System Setting Interface:
System Setting：
Reboot: Click to reboot device
Factory common: Click to reset device for partial function.
Factory all: Click to reset device totally.
“Reboot” will not clear user parameter; “Factory common” will not clear Network and Preset parameter; “Factory all” will reset to default all settings.

Change Password: Change username and password, then click “Apply”.
Note: The username and password, only supports 6~15 letters / numbers / underline

MAINTENANCE

Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzine to clean this unit.

PRODUCT SERVICE

Before returning any equipment for repair, please be sure that it is adequately packed and cushioned against damage in shipment, and that it is insured. We suggest that you save the original packaging and use it to ship the product for servicing. Also, please enclose a note giving your name, address, phone number and a description of the problem.

NOTE: all equipment being returned for repair must have a Return authorization (RMA) Number. To get a RMA Number, please call the FSR Service Department (1-800-332-FSR1). Please display your RMA Number prominently on the front of all packages.

WARRANTY

The DV-HMSW4K-44AUD is warranted against failures due to defective parts or faulty workmanship for a period of three years after delivery to the original owner. During this period, FSR will make any necessary repairs or replace the unit without charge for parts or labor. Shipping charges to the factory or repair station must be prepaid by the owner, and return shipping charges (via UPS Ground) will be paid by FSR.

This warranty applies only to the original owner and is not transferable. In addition, it does not apply to repairs done other than at the FSR factory or Authorized Repair Stations.

This warranty shall be cancelable by FSR at its sole discretion if the unit has been subjected to physical abuse or has been modified in any way without written authorization from FSR. FSR’s liability under this warranty is limited to repairing or replacing the defective unit.

FSR will not be responsible for incidental or consequential damages resulting from the use or misuse of its products. Some states do not allow the exclusion of incidental or consequential damages, so the above limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Warranty claims should be accompanied by a copy of the original purchase invoice showing the purchase date (if a Warranty Registration Card was mailed in at the time of purchase, this is not necessary). Before returning any equipment for repair, please read the important information on service below.

CONTACT INFORMATION:
FSR INC.
244 Bergen Blvd.
Woodland Park, NJ 07424
Phone: 973-998-2300 Order Desk Fax: 973-785-4207
E-mail: [email protected]
Web: http://www.fsrinc.com

References

• FSR Inc.- AV Connectivity Solutions

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>