SOLAX POWER SX-500000 Adapter Box Instruction Manual

: June 15, 2024
: SOLAX POWER

Table of Contents

SOLAX POWER SX-500000 Adapter Box
Safety
FCC STATEMENT
Packing List
Installation Site
Installation Tools
Mechanical Installation
Warranty Registration Form
Contact Information
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SOLAX POWER SX-500000 Adapter Box

Safety

General Notice

Contents may be periodically updated or revised. SolaX reserves the right to make improvements or changes in the product(s) and the program(s) described in this manual without prior notice.
The installation and maintenance can only be performed by qualified personnel who:
- Are licensed and/or satisfy state and local jurisdiction regulations;
- Have good knowledge of this manual and other related documents.
Before installing the device, carefully read, fully understand and strictly follow the detailed instructions of the user manual and other related regulations. SolaX shall not be liable for any consequences caused by the violation of the storage, transportation, installation, and operation regulations specified in this document and the user manual.
Use insulated tools when installing the device. Individual protective tools must be worn during installation, electrical connection and maintenance.
Please visit the website www.solaxpower.com of SolaX for more information.

Descriptions of Labels

CE mark of conformity
UKCA mark of conformity
RCM mark of conformity
FCC mark of conformity
Do not dispose of the device together with household waste.

RF EXPOSURE WARNING

Install and operate the device under the provided instructions.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CAUTION

Before installation, ensure all power of the adapter box has been cut off.
Do not dismantle or scrap by force.
Strictly follow the installation guide to connect cables and the enclosure must be well-locked before the adapter box is electrified.
Unauthorized opening and cable connection will void the warranty and cause lethal danger or serious injury due to electric shock.
Refer to the corresponding installation guide for related safety requirements when it is connected to other devices.
Anti-static measures should be taken to decrease the damage of static electricity to electronic components.
Keep away from flammable, explosive materials.
All the product labels and nameplates on the device shall be maintained visible.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Packing List

SOLAX-POWER-SX-500000-Adapter-Box-fig-6

Installation Site

SOLAX-POWER-SX-500000-Adapter-Box-fig-7

Installation Angle

SOLAX-POWER-SX-500000-Adapter-Box-fig-8

Installation Tools

SOLAX-POWER-SX-500000-Adapter-Box-fig-9

Mechanical Installation

Note: choose a place where the Adapter Box G2 is close to the heat pump.

SOLAX-POWER-SX-500000-Adapter-Box-fig-10

RS485_INV Port Connection

SOLAX-POWER-SX-500000-Adapter-Box-fig-11

Pin definition for RS485_INV

SOLAX-POWER-SX-500000-Adapter-Box-fig-12

Functions of the RS485_INV port

Pin 3 and pin 4 are for power supply.
Pin 4 and pin 5 are for communication.
Please scan the QR code on the cover for the cable connection of the inverter side from the manual of Adapter Box G2.

RS485 Port Connection

Pin definition for RS485

SOLAX-POWER-SX-500000-Adapter-Box-fig-13

The function of the RS485 port

branch port of RS485_INV port for RS485 communication with other devices.
Note: Please refer to the cable connection of the RS485_INV port for connection methods of the RS485 port.

Power Adapter Connection

Note: a power adapter is needed when the inverter cannot supply power for the adapter box.

SOLAX-POWER-SX-500000-Adapter-Box-fig-14

AO Port Connection

SOLAX-POWER-SX-500000-Adapter-Box-fig-15 SOLAX-
POWER-SX-500000-Adapter-Box-fig-16

DO Port Connection

DO port connection under the control of dry contact.

SOLAX-POWER-SX-500000-Adapter-Box-fig-17 SOLAX-
POWER-SX-500000-Adapter-Box-fig-18

DO port connection under the control of SG Ready
Note: Prepare a two-core cable, then strip, crimp and thread the cable through connectors and then make the cable as the way you have been done in a).

SOLAX-POWER-SX-500000-Adapter-Box-fig-19

Screw the waterproof connectors tight and lock the top cover.

APP Login

SOLAX-POWER-SX-500000-Adapter-Box-fig-20 SOLAX-
POWER-SX-500000-Adapter-Box-fig-21

Wi-Fi Configuration

Turn to the “Account” page, click “Wifi Connection” and scan the registration NO.
Type in your home Wi-Fi SSID and password. Follow the instructions to complete the Wi-Fi setting.

SOLAX-POWER-SX-500000-Adapter-Box-fig-22

Only 2.4 GHz is available.
Check more Wi-Fi setting information on www.solaxcloud.com/wifiSetting/.
If the WiFi connection fails, users can connect to the WiFi signal named after the device registration number and visit the IP address http://192.168.10.10/ in a browser to configure Wi-Fi. (account: “admin”; default password: the registration No.)

Local Mode

SOLAX-POWER-SX-500000-Adapter-Box-fig-23

General Setting

Setting steps on X1/X3-Hybrid G4 series inverters.

SOLAX-POWER-SX-500000-Adapter-Box-fig-24

Setting steps on X3-MIC G2 series inverters.

SOLAX-POWER-SX-500000-Adapter-Box-fig-25

Warranty Registration Form

Name……………………………….. Country………………………………….
Phone Number……………………………….. Email……………………….
Address…………………………………………………………………………….
State………………………….. Zip Code………………………………………
Product Serial Number……………………………………………………….
Date of Commissioning……………………………………………………….
Installation Company Name………………………………………………..
Installer Name…………. Electrician License No……………………..

For Installer

Module ( If Any )

Module Brand…………………………………………………………………………………
Module Size(W)………………………………………………………………………………
Number of String…………….. Number of Panel Per String…………………….

Battery ( If Any )

Battery Type…………………………………………………………………………………..
Brand…………………………………………………………………………………………….
Number of Battery Attached…………………………………………………………….
Date of Delivery………………………. Signature………………………………………

Please visit our warranty website: https://www.solaxcloud.com/#/warranty or use your mobile phone to scan the QR code to complete the online warranty registration.

For more detailed warranty terms, please visit SolaX’s official website: www.solaxpower.com to check it.

SolaX Power Network Technology (Zhejiang) Co., Ltd.