gorenje BO6737E02X Built in Oven

gorenje BO6737E02X

Specifications

• Appliance: Built-in Oven
• Manufacturer: Gorenje
• Website: http://www.gorenje.com

For more detailed instructions and tips, please visit http://www.gorenje.com or scan the QR code on the rating plate.
Carefully read the instructions for use before connecting the appliance. Repair or any warranty claim resulting from incorrect connection or use of the appliance shall not be covered by the warranty.

Safety precautions

IMPORTANT SAFETY PRECAUTIONS – CAREFULLY READ THE INSTRUCTIONS AND SAVE THEM FOR FUTURE REFERENCE.

• The appliance must be connected to fixed wiring which has incorporated means of disconnection. Fixed wiring must be made under the wiring rules.
• This means that disconnection must be incorporated in the fixed wiring under the wiring rules.
• The appliance must not be installed behind a decorative door to avoid overheating.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid a hazard (only for appliances supplied with connection cord).

This appliance can be used by children aged 8 years and above, and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction concerning the use of the appliance in a safe way, and if they understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.

WARNING: Accessible parts may become hot during use. Young children should be kept away.
WARNING : The appliance and some of its accessible parts may become very hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised.

The appliance is not intended to be controlled by external timers or a separate remote control system.
Only use the temperature probe recommended for use in this oven.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass/ the glass of hinged lids of the hob (as appropriate), since they can scratch the surface, which may result in shattering of the glass.
Do not use steam cleaners or high-pressure cleaners to clean the appliance as this may result in an electric shock.
WARNING: Before replacing the light bulb, make sure the appliance has been disconnected from the mains power, to prevent the hazard of an electric shock.

Never pour water directly on the bottom of the oven cavity. Temperature differences could result in damage to the enamel coating.
Do not use the appliance if it is damaged. Unplug the appliance from the power mains and call an authorized service center.

Other important safety warnings

• We recommend that (due to appliance weight) at least two persons carry and install the appliance.
• Do not lift the appliance by holding it by the door handle.
• Do not stand or sit on the open oven door, and do not lean against it. Also, do not place any heavy objects on the oven door.
• Make sure the vents are never covered or obstructed in any other way.
• Do not line the oven cavity with aluminum foil, and do not place any baking trays or other cookware on the oven bottom.
• At the end of the baking process, and during baking, be careful when opening the oven door, as there is a danger of scalding.
• Do not use the appliance if it is damaged. Unplug the appliance from the power mains and call an authorized service center.
• The oven can be safely used with or without baking pan guides.
• Do not store items in the oven, which could cause danger when the oven is switched on.

Appliance description

WARNING: Appliance functions and equipment depend on the model.

1. Control unit
2. Door switch
3. Lighting
4. Temperature probe socket
5. Rack levels (1–5)
6. Rating plate
7. Oven door
8. Door handle

Oven equipment and accessories (depending on the model)

WARNING

• When inserting the wire rack into the guide, always make sure its elevated part is at the back and on the top side.
• The shallow baking tray may deform as it heats up in the oven. Once it cools down, it returns to its initial shape. Such deformation does not affect its function.

Control unit

Before first use

• Remove oven accessories and any packaging (cardboard, polystyrene foam) from the oven.
• Wipe the oven accessories and interior with a damp cloth. Do not use abrasive or aggressive cloths or cleaners.
• Heat an empty oven for approximately one hour with the top and bottom heater system at a temperature of 250 °C. The characteristic “new oven scent” will be released; therefore, ventilate the room thoroughly during this process.

Using the oven

Switching on for the first time
First select and confirm the basic settings: time of day (CLoc), display brightness (brht), acoustic signal volume (Vol).

Choosing the settings

Professional baking mode

Additionally, you can set:

• time functions (see chapter 5.4 Time functions)
• step-by-step cooking (see chapter 5.5 Baking by steps)
• au gratin function (GRATIN) (see chapter 6.1 Additional browning – au gratin)

Fast preheat
Use quick preheating to bring the oven to the desired temperature as quickly as possible.

CHOOSING THE COOKING SYSTEM

CHOOSING THE COOKING SYSTEM

1. The systems also allow for steam injection during baking (see chapter 6.2 Cooking with addition of steam).

Time functions

INFORMATION

• If you set the cooking time or delayed start, the oven will be switched off automatically. End and 00:00 will alternate on the display unit.
• When the set cooking time expires, an acoustic signal will be heard which you may turn off by touching any key. After one minute, the acoustic signal will be switched off automatically.

Setting the baking time

Setting the minute minder
From standby:

During cooking setting

Setting delayed end
Use this function when you wish to start cooking the food in the oven after a certain period of time. Place the food into the oven, then set the system and temperature. Then, set the cooking time and the time when you wish your food done (end of cooking).

Example:
Current time: noon; Cooking time: 2 hours; End of cooking: 18:00

WARNING

• This function is not suitable for food that requires quick preheating.
• Perishable food should not be kept in the oven for a long time. Before using this mode, check whether the clock on the appliance is accurately set.

INFORMATION
The select timer function can be reset to 00:00 by long-pressing the KNOB.

Baking by steps
This function allows cooking in two steps or stages (two consecutive cooking steps are combined in a single cooking process).

Automatic cooking mode

1. For these systems, the use of the au gratin function is possible (see chapter 6.1 Additional browning –au gratin).
2. This function is used for determining the energy efficiency class under the EN 60350-1 standard.

Automatic programs

For selected automatic programmes, it is possible to use the au gratin function (see chapter 6.1 Additional browning – au gratin).

Additional functions

Starting the cooking process

Additional browning – au gratin
This function is used in the last phase of cooking when we add dressing/topping to the dish or we want to crispen its surface. When using the gratin function, a crispy golden yellow crust is formed on the dish, which protects it from drying, and at the same time gives the dish a nicer appearance and better taste.

The function can also be switched off while it is in progress. Rotate the KNOB to setting Choose the dimmed sign and confirm it by pressing on the KNOB.

Cooking with the addition of steam
Addition of steam results in better browning and a crunchier crust.
In systems with steam addition or injection, place the shallow baking sheet in the first-level guide while the oven is still cool. Pour a maximum of 2 dl of water onto the baking sheet. Place the food to be cooked on the second level and start the system.

NOTE: If you are using a deep baking tray, insert it one level higher than specified in the recommended settings table.
For optimum operation of the function, do not open the oven door and do not add water during the cooking process.

End of cooking by touching

You can interrupt the operation by touching start | stop.

General settings

(switch from higher to the lowest display brightness) during night time (8:00 p.m. to 6:00 a.m.)
hidE| Standby – this function automatically switches the clock display on or off.
AdPt| Adaptive function – the function allows you to adjust the set cooking temperature and cooking time. This function is turned off by default, but you can turn it on.
Avto| Automatic quick preheating – this function allows you to automatically add quick preheating to the cooking systems that allow it.
SAbb| Sabbath – this function allows the food in the oven to stay warm without having to turn the oven on and off.

FAct

| Reset to factory defaults – Select rES to choose the factory default settings, and confirm by pressing and holding the start I stop key. Hold the key until all lit dashes disappear.

Locking keys

Cooking table

NOTE: Dishes requiring a fully pre-heated oven are indicated with a single asterisk * in the table. Dishes for which a 5-minute pre-heating cycle suffices are indicated with two asterisks ** . In this case, do not use the rapid preheat mode.

Cooking with a temperature probe ( BAKESENSOR)
The temperature probe allows for accurate monitoring of the core temperature of the food during cooking.

WARNING: The temperature probe should not be in the direct vicinity of the heating elements.

Cleaning and maintenance

WARNING

• Be sure to unplug the appliance from the power supply and wait for the appliance to cool down.
• Children should not clean the appliance or perform maintenance tasks without proper supervision.

Using the Aqua Clean program to clean the oven

WARNING: Use the Aqua Clean system when the oven has fully cooled down.

• Regularly clean the appliance and use warm water and hand dishwashing liquid to remove larger impurities and limescale. Use a clean, soft cloth or sponge cloth.
  Oven equipment is dishwasher-safe.

Removing wire and fixed pull-out (extendible) guides

Removing and replacing the oven door and glass panes

Replacing the bulb
Halogen lamp: G9, 230 V, 25 W

Special warnings and fault reporting

• During the warranty period, only a service center authorized by the manufacturer may carry out any repairs.
• Before making any repairs, make sure the appliance is disconnected from the power mains either by removing the fuse or by disconnecting the power plug from the wall outlet.
• Any unauthorized repairs of the appliance may result in electric shock and short circuit hazard; therefore, do not perform them. Leave such work to an expert or a service technician.
• In case of minor problems with appliance operation, check this manual to see if you can fix the problem yourself.
• If the appliance is not operating properly or at all due to inappropriate operation or handling, a visit from a service technician shall not be free of charge, even during the warranty period.
• A type plate with basic information about the appliance is attached to the edge of the oven.

Troubleshooting table

in the oven is described in the chapter Replacing the bulb.

Control unit is not responding, the screen is frozen.

| Disconnect the appliance from the power mains for a few minutes (undo the fuse or switch off the main switch); then, reconnect the appliance and switch it on.
Error code ErrX is displayed.

In case of a double-digit error code, the display will show ErXX.

| There is an error in the electronic module operation. Disconnect the appliance from the power mains for a few minutes.

If the error is still indicated, call a service technician.

The display will show when the temperature probe is not connected.| Clean the socket.

Try to connect and disconnect the temperature probe several times in succession.

If the problems persist despite observing the above advice, call an authorized service technician. Repair or any warranty claim resulting from incorrect connection or use of the appliance shall not be covered by the warranty. In this case, the user will cover the cost of repair.

Environment protection

• Our product packaging is made of environmentally friendly materials that can be recycled, disposed of, or destroyed without any hazard to the environment. To this end, packaging materials are labelled appropriately.
• The symbol on the product or its packaging indicates that the product should not be treated as normal household waste. Take the product to an authorized collection centre for waste electric and electronic equipment processing.
  Correct disposal of the product will help prevent any negative effects on the environment and health of people, which could occur in case of incorrect product removal. For detailed information on removal and processing of the product, please contact the relevant municipal body in charge of waste management, your waste disposal service, or the store where you bought the product.

We reserve the right to any changes and errors in the instructions for use.

Cooking test

EN60350-1: Only use equipment supplied by the manufacturer.
Always insert the baking tray all the way to the end position on the wire guide. Place pastry or cakes baked in moulds as shown in the image.

• Preheat the appliance to desired temperature. Do not use the rapid preheat mode.
• Preheat the appliance for 10 minutes. Do not use the rapid preheat mode.
• Turn after 2/3 of cooking time.

QR SCAN

Made in Slovenia BOS6747A01X

References

• gorenje.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>