JBL 360P Quantum Console Wireless Headset User Guide

: June 15, 2024
: JBL

Table of Contents

JBL 360P Quantum Console Wireless Headset
Specifications
WHAT’S IN THE BOX
Requirements
OVERVIEW
POWER ON & CONNECT
BUTTON COMMAND
First time setup
Dual source switching
MICROPHONE
CHARGING
LED BEHAVIOURS
TECH SPEC
FCC
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

JBL 360P Quantum Console Wireless Headset

Specifications

Model: JBL Quantum360P Console Wireless
Driver size: Not specified
Frequency response (Passive): Not specified
Frequency response (Active): Not specified
Microphone frequency response: Not specified
Max input power: Not specified
Sensitivity: Not specified
Maximum SPL: Not specified
Microphone sensitivity: Not specified
Impedance: Not specified
2.4GHz Wireless transmitter power: Not specified
2.4GHz Wireless modulation: Not specified
2.4GHz Wireless carrier frequency: Not specified
Bluetooth transmitter power: Not specified

WHAT’S IN THE BOX

Requirements

JBL QuantumENGINE SOFTWARE REQUIREMENTS
PLATFORM: WINDOWS 10 (64 BIT ONLY) / WINDOWS 11| 500MB OF FREE HARD DRIVE SPACE FOR INSTALLATION

SYSTEM COMPATIBILITY

PC
XBOX™
PLAYSTATION™
NINTENDO SWITCH™
MOBILE
MAC

OVERVIEW

Game audio-chat balance dial
Volume Control
Microphone Mute / unMute
CHARGING LED
USB-C port
2.5mm jack for boom microphone
Flat-fold ear cup
POWER / 2.4GHz / Bluetooth LED
Power on / off and Bluetooth pairing slider
2.4GHz LED
2.4GHz PAIRING BUTTON

POWER ON & CONNECT

2.4GHz Wireless

Bluetooth

BUTTON COMMAND

First time setup

7a Connect the headset to your PC via 2.4GHz USB wireless connection.
7b Go to “Sound Settings” -> “Sound Control Panel”.
7c Under “Playback” highlight “JBL quantum360P Console
- `Wireless Game” and select “Set Default” -> “Default Device”.
7d Highlight “JBL quantum360P Console Wireless Chat” and select “Set Default” -> “Default Communication Device”.
7e Under “Recording” highlight “JBL quantum360P Console
- Wireless Chat” and select “Set Default” -> “Default Device”. 7f In your chat application select “JBL quantum360P Console
- Wireless Chat” as the default audio device.
7G Follow the onscreen instructions to personalize your sound

Dual source switching

MICROPHONE

CHARGING

LED BEHAVIOURS

TECH SPEC

Model: QUANTUM360P CONSOLE WIRELESS
Driver size: 40 mm Dynamic drivers
Frequency response (Passive): 20 Hz – 20 kHz
Frequency response (Active): 20 Hz – 20 kHz
Microphone frequency response: 100 Hz – 8 kHz
Max input power: 30 mW
Sensitivity: 98 dB SPL @1 kHz / 1 mW
Maximum SPL: 94 dB
Microphone sensitivity: -42 dBV / Pa @1 kHz
Impedance: 32 ohm
2.4GHz Wireless transmitter power: < 7 dBm (EIRP)
2.4GHz Wireless modulation: GFSK
2.4GHz Wireless carrier frequency: 2402 MHz – 2480 MHz
Bluetooth transmitter power: < 6 dBm (EIRP)
Bluetooth transmitter modulation: GFSK, π/4-DQPSK
Bluetooth frequency : 2402 MHz – 2480 MHz
Bluetooth profile version: HFP: v1.5, A2DP: v1.3
Bluetooth version: BT Core: v5.2
Battery type: Li-ion battery (3.7 V / 500 mAh) Power supply: 5 V, 1 A
Charging time: 2 hrs
Music play time with only 2.4GHz on: Up to 22 hrs
Talk time with only 2.4GHz on: Up to 22 hrs
Music play time with only BT on: Up to 26 hrs
Talk time with only BT on: Up to 26 hrs
Microphone pickup pattern: Omni-directional
Weight: 256.4 g

FCC

IC RF Exposure Information and Statement for Headphone

The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A- JBLQ360WL) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.007 W/Kg.

The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters, and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.

IC RF Exposure Information and Statement for USB Wireless Dongle
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-Q360PWLTM) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.269 W/Kg.

Head operation
The device was subjected to a typical head manipulation test. To comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user›s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.

IC: 6132A-JBLQ360WL

Body operation
The device was tested for typical bodily operations where the product was kept at 5 mm distance attached away from the body. Non-compliance with the above restrictions may result in violation of IC RF exposure guidelines. Use only the supplied or approved antenna.

FAQ

Q: Is the JBL Quantum360P Console Wireless headset compatible with Mac?
A: Yes, the JBL Quantum360P Console Wireless headset is compatible with Mac.
Q: Can I use the JBL Quantum360P Console Wireless headset with my PS4/PS5?
A: Yes, the JBL Quantum360P Console Wireless headset is compatible with PS4/PS5.
Q: How do I personalize my sound settings on the JBL Quantum360P Console Wireless headset?
A: Follow the onscreen instructions in the JBL QuantumENGINE software to personalize your sound settings.
Q: Can I use the JBL Quantum360P Console Wireless headset with my mobile device?
A: Yes, the JBL Quantum360P Console Wireless headset is compatible with mobile devices.

BLUETOOTH
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.