Audiopipe ATR-4053 Heavy Duty Super Tweeter User Manual
- June 15, 2024
- Audiopipe
Table of Contents
User Manual
ATR-4053 Heavy Duty Super Tweeter
ATR-4053
ATR-4053-RED (candy Red cotor)
ATR-4053-BLUE (candy Btue cotor)
Havy Duty Super Tweeter
Sipere buy
www.Audiopipe.com
ATR-4053 /RED/BLUE
SPECIFICATIONS
Nominal Diameter……………………………………………………… 4°x4™ /102x102mm
Nominal Impedance…………………………………………………….. 8 OMS
RMS Power Handling …………………………………………………….. 2OQ Watts
MAX Power Handling …………………………………………………….. 400 Watts
Sensitivity (lw/1m)…………………………………………………….. 107 dB
Frequency Response …………………………………………………….. 3000HZ-22KHZ
Pair or Single …………………………………………………… Single
Voice Coil Diameter ……………………………………………………1.5″ /38mm
Voice Coil Former Material……………………………………………………kAPTON
Winding Material ……………………………………………………CCAW
Diaphragm Material ……………………………………………………Aluminum
Magnet Material ……………………………………………………Ferrite
SPEAKER MEASUREMENTS
Overall Diameter ……………………………………………………4″ /102mm
Overall Depth ……………………………………………………2.6″ / 66mm
Front Mount Baffle Cutout …………………………………………….3.6″/92MM
Mounting Depth……………………………………………………2.2″/55mm
Motor Diameter ……………………………………………………3.5″/ 90mm
INSTALLATION INSTRUCTIONS
If you purchase a Crossover Network for your woofer / Midrange / Tweeter
system you do not need to connect a condenser.
If your system does not include a Crossover Network, you must connect
capacitor as follows:
- Connect either end of capacitor to the positive terminal (+) of speaker.
- Connect other end of capacitor to the speaker wire harness; be certain to connect to positive side of harness, which is the radio output(+) side.
- To get best sound performance, it is recommended to use capacitor 1.5pF/250V for this unit.
Visit audiopipe.com for more information.