intempo EE5977BLKSTKEU7 Desktop Selfie Light User Guide

: June 15, 2024
: intempo

Table of Contents

intempo EE5977BLKSTKEU7 Desktop Selfie Light
Description of Parts
Safety Instructions
Care and Maintenance
Instructions for Use
Specifications
More Information
Read User Manual Online (PDF format)
Download This Manual (PDF format)

intempo EE5977BLKSTKEU7 Desktop Selfie Light

intempo-EE5977BLKSTKEU7-Desktop-Selfie-Light-
PRODUCT

Description of Parts

intempo-EE5977BLKSTKEU7-Desktop-Selfie-Light-FIG-1

Desktop Selfie Light
Ring light
Phone holder
Phone holder arm
360 ° rotating ball
Tripod stand
Adjustable handle screw

Please retain instructions for future reference.

Safety Instructions

When using this unit, basic safety precautions should always be followed.
Children aged from 8 years and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge can use this unit, only if they have been given supervision or instruction concerning use of the unit in a safe way and understand the hazards involved.
Children should be supervised to ensure that they do not play with the unit.
Unless they are older than 8 and supervised, children should not perform cleaning or user maintenance.
This unit is not a toy.
This unit contains no user serviceable parts. If the unit and any of its accessories have been dropped or damaged, only a qualified person should carry out repairs. Improper repairs may place the user at risk of harm.
Keep the unit out of reach of children.
Keep the unit away from heat or sharp edges that could cause damage.
Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquid.
Keep the unit free from dust, lint etc.
Do not immerse the unit in water or any other liquid.
Do not operate the unit with wet hands.
Do not operate the unit if it has been exposed to water, moisture or any other liquid.
Do not use the unit for anything other than its intended use.
Do not use any accessories other than those supplied.
Do not store the unit in direct sunlight or in high humidity conditions.
This unit is intended for domestic use only. It should not be used for commercial purposes.

WARNING: This unit may heat up slightly during use; keep away from flammable materials.

Disposal of Waste Batteries and Electrical & Electronic Equipment

This symbol on the product, its batteries or is packaging means that this product and any batteries it contains must not be disposed of with household waste. Instead, it is the user’s responsibility to hand this over to an applicable collection point for the recycling of batteries and electrical and electronic equipment. This separate collection and recycling will help to conserve natural resources and prevent potential negative consequences for human health and the environment due to the possible presence of hazardous substances in batteries and electrical and electronic equipment, which could be caused by inappropriate disposal. Some retailers provide take-back services which allow the user to return exhausted equipment for appropriate disposal. It is the user’s responsibility to delete any data on electrical and electronic equipment prior to disposal. For more information about where to drop batteries, electrical and electronic waste off, please contact the local city/ municipality office, household waste disposal service, or the retailer.

Care and Maintenance

Wipe the selfie light with a soft, lint-free cloth.

DO NOT

Use any abrasive cleaning solvents to clean the selfie light.
Expose the selfie light to extremely high or low temperatures.
Drop the selfie light.
Attempt to disassemble the selfie light.
Dispose of the selfie light in a fire as it will result in an explosion.

Instructions for Use

Assembling the Desktop Selfie Light

The selfie light must be assembled before use.

STEP 1: Extend the legs out from the tripod stand and place onto a secure, flat surface.
STEP 2: Screw the 360 ° rotating ball onto the extendable ring light pole and twist the adjustable handle screw in a clockwise direction.
STEP 3: Attach the ring light to the top of the tripod stand by rotating in a clockwise direction.
STEP 4: Attach the flexible phone holder pole into the screw hole on the ring light and secure into place by twisting in a clockwise direction. The selfie light can now be used.

Using the Ring Light

STEP 1: Insert the USB connector into a suitably powered USB port.
STEP 2: Switch the ring light on by pressing ‘ON/OFF’.
STEP 3: Increase the brightness by pressing ‘+; decrease the brightness by pressing -.
STEP 4: Press ‘FUNCTION’ to switch between mode. There are three colour temperatures to choose from:

1. Cool White Light
2. Hybrid Light
3. Warm Yellow Light

STEP 5: Switch the ring light off by pressing ‘ON/OFF.

Using the Phone Holder

STEP 1: Extend the phone holder arm outwards and insert a phone or device into the phone holder. Slowly release the phone holder arm so that it wraps securely around the device.
STEP 2: To adjust the phone holder, loosen the nut on the back of the phone holder by turning it in a clockwise direction. Rotate the phone holder (360 ° motion) until the desired angle is reached. Tighten the nut by rotating in an anticlockwise direction to secure the phone holder into place.

NOTE